HomeMy WebLinkAboutBB17 00424 1 .
•
City of Bremerton PERMIT NUMBER: BB17 00424
Department of Community Development DATE ISSUED: 06/01/2017
r,
Cr r o r 345-6th Street,Ste.600,Bremerton WA 98337 SITE ADDRESS:3000 AUSTIN DR BLDG G
BREMERTON (360)473-5275 Fax:(360)473-5278
ASSESSOR NUMBER: 3721-000-001-0001 ZONING: RIO
Name Phone Address Access Code
APPLICANT: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWHS-XWSGO
KENT,WA 98032
OWNER: EP HOLDINGS LLC 6622 WOLLOCHET DR NW MYSOH-69315
GIG HARBOR,WA 98335
CONTRACTOR: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWH5-XWSGO
KENT,WA 98032
LENDER:
SUBMITTED: 06/01/2017 APPROVED: EXPIRATION: 11/28/2017 STATUS: ISSUED
VALUATION: Reroof Permit—No underlayment or structural work
ERLANDS POINT APARTMENT-RE ROOF BLDG G
ERLANDS POINT APARTMENT-RE ROOF BLDG G
Technology Fee $5.00
Building Code Edition:
Reroof permit—no underlayment or $100.00
structural work Occupancy Group:
State Surcharge $4.50
Type of Construction:
TOTAL FEES: $109.50 Flood Zone:
Setbacks: ////:(F/L/RT/R/O)
Sanitation Method:
Number of Bedrooms:
Inspection Requests: FIRE:Fire Inspections (360)473-5386
DCD:Building Inspections: (360)473-5870 HEALTH:Kitsap County Health District (360)337-5285
L&I:Department of Labor and Industries (360)415-4000 PW&U:Public Works-Engineering (360)473-5270
This permit shall become null and void if the described work authorized by this permit has not commenced within 180 days from the date of issuance,or if
the work is suspended or abandoned at any time after the work is commenced for a period of 180 days. It is the responsibility of the permit holder to see that
the required inspections are made.Failure to obtain required inspections may result in stoppage of the work until such time that the permit holder can
susbstantiate to the City of Bremerton that the concealed work meets or exceeds code requirements.Any demolition,testing,or financial burden shall be
borne directly by the permit holder.Failure to substantiate code requirements will indemnify the City against any and all responsibility or liability connected
with the construction.I hereby certify that I have read and examined this permit and know the same to be true and correct.All provisions of laws and
ordinances governing this type of work will be complied with whether specified herein or not.The granting of a permit does not presume to give authority to
violate or cancel provisions of any State or local law regulating construction or the performance of the construction.If listing the owner as general contractor,
I certify that I am exempt from the requirements of the State Contractor's Registration Law under Section 3,Chapter 126,Laws of 1967.All revisions to an
approved plan require DCD review and approval prior to performing work.All building and tenant occupancy permits are required to pass final inspection
prior to permit expiration and obtain a certificate of occupancy prior to use or occupancy.
I have read,and agree to abide by the conditions of this permit including all conditions of zoning,building codes,and State and Federal laws.
SIGNATURE OF OWNER OR AGENT: it A L� ,34"1
PRINTED NAME: L1 DATE: k i f
CONDITIONS
Printed by:Mountjoy,Margret on:06/01/2017 10:20 AM
Page I of 3
Ci hof Bremerton
PERMIT NUMBER: BB17 00424
Department of Community Development DATE ISSUED: 06/01/2017
Cr r OF 345-6th Street,Ste.600,Bremerton WA 98337 SITE ADDRESS:3000 AUSTIN DR BLDG G
BREMERTON (360)473-5275 Fax:(360)473-5278
ASSESSOR NUMBER: 3721-000-001-0001 ZONING: RIO
Name Phone Address Access Code
APPLICANT: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWHS-XWSGO
KENT,WA 98032
OWNER: EP HOLDINGS LLC 6622 WOLLOCHET DR NW MYSOH-69315
GIG HARBOR,WA 98335
CONTRACTOR: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWH5-XWSGO
KENT,WA 98032
LENDER:
SUBMITTED: 06/01/2017 APPROVED: EXPIRATION: 11/28/2017 STATUS: ISSUED
By applying for this permit,the applicant has granted to the City of Bremerton the right to enter the above-described location at reasonable
times to inspect the proposed,in-progress or completed work performed under this permit to ensure compliance with the permit conditions and
other applicable laws and regulations.Should such entry be refused,all authorizations and approvals contained in this permit shall be
immediately suspended and any work performed under the permit shall immediately cease until authorized in writing by the City of Bremerton.
Work performed in violation of this condition shall be considered to have been performed without the approval of the City of Bremerton.The
City of Bremerton's approval of this application pertains only to the City's regulatory jurisdiction,and thus compliance with City regulations
does not necessarily ensure compliance with federal or state laws.
10. (DCD-01) ASBESTOS AND LEAD-BASED PAINT:
ASBESTOS:Prior to performing any renovation or demolition work,Puget Sound Clean Air Agency and Washington
Department of Labor and Industries(L&I)regulations require an asbestos survey be performed to determine whether there are
asbestos-containing materials in the work area or structure. The asbestos survey must be conducted by and EPA-certified
(AHERA)building inspector(except renovation or owner-occupied single family residences).For more information,please
contact Clean Air Agency through their web site at www.pscleanair.org or by phone at 800-552-3565 or 206-343-8800. The
L&I web site can be found at www.lni.wa.gov/TradesLicensing/LicensingReq/Asbestos/default.asp.
LEAD-BASED PAINT:A contractor or person receiving compensation who is performing renovation,repairs or painting on
a residential building or a child-occupied facility built before 1978,must be trained and certified by an accredited training
provider,and registered as a Renovator by the Washington State Department of Commerce-Lead-Based Paint Program. For
further information please contact:The Department of Commerce website at:www.commerce.wa.gov/lead,or call: (360)
586-LEAD(5323).
CONTRACTOR:A contractor's registration issued by Washington State Dept.of Labor&Industries is required for anyone
who contracts or submits bids for construction work,including new construction,alterations,repairs,or anyone who consults
or superintends,improves,demolishes,develops residential property for sale,or"flips"houses.Contact L&I at(360)415-
4000 for information.
10. (DCD-IND INSP) A third-party inspection may be required for this permit. You may consider contacting a third party independent inspector
prior to performing the work so they understand the scope of work being performed. A final inspection report from the
independent inspector is required for the City's records.
14. (DCD-14) DCD: Approved Plans,Engineering,Site Plan,Permit,and Conditions shall remain on site and be available for inspection.
Any changes to plans shall be approved before construction is performed.Architect or engineer of record shall approve the
change before submitting a revision.A revision is subject to a revision fee and additional fees for plan review and inspections.
15. (DCD-02) DCD:Validity of permit.The issuance or granting of a permit shall not be construed to be a permit for,or an approval of,any
violation of any of the provisions of the Washington State Building code or of any other ordinance of the City of Bremerton.
Permits presuming to give authority to violate or cancel the provisions of the Washington State Building code or other
ordinances of the City of Bremerton shall not be valid.The issuance of a permit based on construction documents and other
data shall not prevent the building official from requiring the correction of errors in the construction documents and other
data.The building official is also authorized to prevent occupancy or use of a structure where in violation of the Washington
State Building code or of any other ordinances of the City of Bremerton.
15. (FIRE-ROOF) At least two fire extinguishers with a rating of 40-B:C on the roof during hot work.More extinguishers may be needed
depending on the number of torches in operation.Fire watch on roof during hot work and at least 1 hour after hot work is
completed.Follow manufacturer's instructions for installation to avoid fire.
20. (DCD-47) DCD:Reinspection Fee:All approved plans,the printed building permit,and the permit inspection placard,are required to be
on-site for inspection purposes,and work to be inspected shall be complete and ready for inspection.If an inspection is called
for and plans are not available on site,or the work is not ready for inspection,approval will not be granted.In addition,a re-
inspection fee will be charged and must be collected by the Department of Community Development prior to any further
inspections being performed or approvals granted.
MINIMUM INSPECTIONS REQUIRED
To request an inspection,please can(360)473-5870 and be sure to provide your permit number,name on permit,site address,contact phone
number,and inspection type.To register for on-line inspection access,visit the City's website at www.ci.bremerton.wa.us.
Printed by:Mountjoy,Margret on:06/01/2017 10:20 AM
Page 2 of 3
f .
City of Bremerton PERMIT NUMBER: BB17 00424
Department of Community Development DATE ISSUED: 06/01/2017
Cr r OF 345-6th Street,Ste.600,Bremerton WA 98337 SITE ADDRESS:3000 AUSTIN DR BLDG G
BREMERTON (360)473-5275 Fax:(360)473-5278
ASSESSOR NUMBER: 3721-000-001-0001 ZONING: R10
Name Phone Address Access Code
APPLICANT: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWHS-XWSGO
KENT,WA 98032
OWNER: EP HOLDINGS LLC 6622 WOLLOCHET DR NW MYSOH-69315
GIG HARBOR,WA 98335
CONTRACTOR: FIELDS ROOF SERVICE INC 253-852-4974 25924 78TH AVE S PCWH5-XWSGO
KENT,WA 98032
LENDER:
SUBMITTED: 06/01/2017 APPROVED: EXPIRATION: 11/28/2017 STATUS: ISSUED
Inspection Description
FINAL-BUILDING Final Inspection-Building
Printed by:Mountjoy,Margret on:06/01/2017 10:20 AM
Page 3 of 3
PERMIT CENTER
CITY OF COMMERCIAL
BREMERTON Building Permit Application
Department of Community Development * 345-6th Street,Suite 600 * Bremerton,WA 98337-1873
(360) 473-5275 * Fax (360) 473-5278 * www.ci.bremerton.wa.us
Applicant In Owner n Contractor ❑ Authorized Ag
Business Name: A7\,1:i v-\.CL' Po rv, -k-- '16--)+-2 _ {tr e2-\ 6 e---) V'
Site Address: ' 07 m Vl 0 r-C---
To apply for a property address,contact Public Works at(360)473-5270
CONTRACTOR BUSINESS OWNER
Name:_ -,-N. -s ` F- 5, --- -\uk., Name: �:P t-\-rc-,Aite
Address: ct .. 1Z-ti-\ a\r S Address:<4( 3 )0k ( '.,, 0,r. t-Lta)
City, State, Zip: \1-)CC 1,\-\- \1."�Ct c'1CSCq,2_ City, State, Zip:--- ,l(-hlk- -t2.P - CA B>—,c
License#& Exp. Date:� =t• Q 52. ,2 tJL Phone#: ( )
Bremerton Business License: Authorized Agent Name:
Contact Name: -- --c2c�.1-\0 Address:
Contact Phone#: ( -?•)) 255D--3-kc\1`\ City, State, Zip:
Email address: \L. -�t_e_Ka St' flwn #: ( c 1
Tax ID/Parcel#:3-0 - -) Om. e-k Email address:
n Sewer n Septic
What is the application for? (Please check) I I New Construction I 1 Alteration 1 Addition
I NEW COMMERCIAL n TENANT IMPROVEMENT WITH WORK
I COMMERCIAL REMODEL In OCCUPANCY WITH CHANGE OF USE
COMMERCIAL ADDITION n NEW SIGN
n COMMERCIAL REPAIR n GRADING(Cubic Yards: )
NEW MULTI-FAMILY yL REROOF
OTHER:
n DEMOLITION Interior Exterior** Foundation Wall** Roof/Section**
' **Separate demolition permit and fees required.
Contact Public Works for sewer cap permit(473-5270). Sewer must be capped prior to demolition permit issuance.
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE? YES n NO Fr
Scope of work proposed/Type of Business: . :`()\ii ve \6,0\.4e,}1-% C_(_ Ylt D `'4-,
X
\,\ ,\r, , \,\C \ ` ..v\P,� C rti1.ecA--, ms\ -,r-, ti"--1 t\_
Square Footage: Building:(,?0, O7) ,c(j.-Ct- Construction Type:
Valuation I Plan Review Fee I Permit Fee Surcharge Tech Fee Total Fees
q (p,)-?1-. . O t)
Application for which no permit is issued within 180 days following the date of application shall expire by limitation,and plans and other data
submitted for review may thereafter be returned to the applicant or destroyed by the building official. The building official may extend the time
for action by the applicant for a period not exceeding 180 days on request by the applicant,showing the circumstances beyond the control of the
a..' . t have prevented action from being taken. No applicant shall be extended more than once. In order to renew action on an application
a er- .i :ti�(' tthhe,lpplicant all res`pmitt plans and pay a new plan review fee.
•plica +s Signature Date
t" r
Print Name
Rev.June 2016
• Fields Roof Service, Inc.
25924 — 78th Ave. So. Kent, Washington 98032 Fax (253)852-4999
Main Office Seattle Tacoma Bellevue Bremerton Olympia
253-852-4974 206-367-2564 253-952-3744 425-644-7128 360-479-0650 360-754-4099
Terry Patnode Roofing Proposal and Sales Agreement 06/01/2017
Sumitted to Job Site 170768
Edison 47 Erlands Point-Bldg E
5201 Olympic Drive NW 3000 Austin Drive
Suite 310 Building E
Gig Harbor WA 98335 Bremerton WA 98312
We hereby propose to supply materials and labor to complete the following:
Roof Removal and Installation of BP Mystique 42 Roof System
Work Scope:
- Remove existing (2) layer composition roof system, hand pack it to disposal unit and dispose of at an approved dump site.
*Dump fees are included in price below.
- Supply and install new 15#felt over entire roof surface as a vapor barrier.
- Supply and install new 26-Gauge rake metal at all rake edges.
- Supply and install new 26-Gauge step flashing at all step flashing locations.
- Supply and install new 26-Gauge w-valley metal at all valley locations.
- Supply and install new AF-50 Vents at all existing locations.
- Supply and install new BP starter course of shingles over all rake and gutter edges.
- Supply and install new BP Mystique 42 laminate shingle roof system over entire house.
- Supply and install new ventridge over all roof ridges and hips.
- Supply and install new BP Accuridge precut ridge shingles over all roof ridges and hips.
- Supply and install new No-Caulk pipe boots over all plumbing pipes.
- Clean up and haul away any related roofing debris from job site each day.
- Clean out existing gutters of all roofing related debris after all roofing has been completed.
- Run magnet around house after roof installation has been completed to assure no nails left behind.
Exclusions: citypermit, plywood p ywood replacement as needed for rotting
Note: If plywood decking is in need of replacement,the additional cost will be$50.00 per sheet of 7/16"OSB or$56.00 per sheet of'/"
CDX(which includes removal, disposal and installation).
Guarantee= 10 years on workmanship from Fields Roof Service
Manufacturers(BP) Limited Lifetime Warranty on materials
Plus sales tax and permit fees,if required.Prices subject to change after 15 days Contract Amount... $ 35,190.00
A 3%surcharge will be added for credit card processing on the total including tax. We accept Visa and Master Card.
CONDITIONS OF SALE: The Terms and Conditions on the reverse(or attached)are incorporated and made a part of this Agreement.By signing below,you are agreeing to this
Roofing Proposal and Sales Agreement which consists of the statement of work and cost on this front page and the Term and Conditions on the reverse(or attached).
Payments shall be made to: Fields Roof Service,Inc. 25924 78th Ave S. Kent,WA 98032 Contractor Reg.No.FIELDRS262L 1
Owner or Representative Date Fields Roof Service,Inc-Sales Approval Date
Fields Roof Service, Inc.
25924 — 78th Ave. So. Kent, Washington 98032 Fax (253)852-4999
Main Office Seattle Tacoma Bellevue Bremerton Olympia
253-852-4974 206-367-2564 253-952-3744 425-644-7128 360-479-0650 360-754-4099
Terry Patnode Roofing Proposal and Sales Agreement 06/01/2017
Sumitted to Job Site 170769
Edison 47 Erlands Point-Bldg M
5201 Olympic Drive NW 3000 Austin Drive
Suite 310 Building M
Gig Harbor WA 98335 Bremerton WA 98312
We hereby propose to supply materials and labor to complete the following:
Roof Removal and Installation of BP Mystique 42 Roof System
Work Scope:
- Remove existing (2)layer composition roof system, hand pack it to disposal unit and dispose of at an approved dump site.
*Dump fees are included in price below.
- Supply and install new 15#felt over entire roof surface as a vapor barrier.
- Supply and install new 26-Gauge rake metal at all rake edges.
- Supply and install new 26-Gauge step flashing at all step flashing locations.
- Supply and install new 26-Gauge w-valley metal at all valley locations.
- Supply and install new AF-50 Vents at all existing locations.
- Supply and install new BP starter course of shingles over all rake and gutter edges.
- Supply and install new BP Mystique 42 laminate shingle roof system over entire house.
- Supply and install new ventridge over all roof ridges and hips.
- Supply and install new BP Accuridge precut ridge shingles over all roof ridges and hips.
- Supply and install new No-Caulk pipe boots over all plumbing pipes.
- Clean up and haul away any related roofing debris from job site each day.
- Clean out existing gutters of all roofing related debris after all roofing has been completed.
- Run magnet around house after roof installation has been completed to assure no nails left behind.
Exclusions: city permit, plywood replacement as needed for rotting
Note: If plywood decking is in need of replacement,the additional cost will be$50.00 per sheet of 7/16"OSB or$56.00 per sheet of%2"
CDX(which includes removal, disposal and installation).
Guarantee= 10 years on workmanship from Fields Roof Service
Manufacturers(BP) Limited Lifetime Warranty on materials
Plus sales tax and permit fees,if required.Prices subject to change after 15 days Contract Amount... $ 32,839.00
A 3%surcharge will be added for credit card processing on the total including tax. We accept Visa and Master Card.
CONDITIONS OF SALE: The Terms and Conditions on the reverse(or attached)are incorporated and made a part of this Agreement.By signing below,you are agreeing to this
Rooting Proposal and Sales Agreement which consists of the statement of work and cost on this front page and the Term and Conditions on the reverse(or attached).
Payments shall be made to: Fields Roof Service,Inc. 25924 78th Ave S. Kent WA 98032 Contractor Reg.No.FIELDRS262L 1
Owner or Representative Date Fields Roof Service,Inc-Sales Approval Date
•
Fields Roof Service, Inc.
25924 — 78th Ave. So. Kent, Washington 98032 Fax (253)852-4999
Main Office Seattle Tacoma Bellevue Bremerton Olympia
253-852-4974 206-367-2564 253-952-3744 425-644-7128 360-479-0650 360-754-4099
Terry Patnode Roofing Proposal and Sales Agreement 06/01/2017
Sumitted to Job Site 170767
Edison 47 Erlands Point- Bldg G
5201 Olympic Drive NW 3000 Austin Drive
Suite 310 Building G
Gig Harbor WA 98335 Bremerton WA 98312
We hereby propose to supply materials and labor to complete the following:
Roof Removal and Installation of BP Mystique 42 Roof System
Work Scope:
- Remove existing (2) layer composition roof system, hand pack it to disposal unit and dispose of at an approved dump site.
*Dump fees are included in price below.
- Supply and install new 15#felt over entire roof surface as a vapor barrier.
- Supply and install new 26-Gauge rake metal at all rake edges.
- Supply and install new 26-Gauge step flashing at all step flashing locations.
- Supply and install new 26-Gauge w-valley metal at all valley locations.
- Supply and install new AF-50 Vents at all existing locations.
- Supply and install new BP starter course of shingles over all rake and gutter edges.
- Supply and install new BP Mystique 42 laminate shingle roof system over entire house.
- Supply and install new ventridge over all roof ridges and hips.
- Supply and install new BP Accuridge precut ridge shingles over all roof ridges and hips.
- Supply and install new No-Caulk pipe boots over all plumbing pipes.
- Clean up and haul away any related roofing debris from job site each day.
- Clean out existing gutters of all roofing related debris after all roofing has been completed.
- Run magnet around house after roof installation has been completed to assure no nails left behind.
Exclusions: city permit, plywood replacement as needed for rotting
Note: If plywood decking is in need of replacement,the additional cost will be$50.00 per sheet of 7/16"OSB or$56.00 per sheet of/"
CDX(which includes removal, disposal and installation).
Guarantee= 10 years on workmanship from Fields Roof Service
Manufacturers(BP) Limited Lifetime Warranty on materials
Plus sales tax and permit fees,if required.Prices subject to change after 15 days Contract Amount... $ 28,196.00
A 3%surcharge will be added for credit card processing on the total including tax.We accept Visa and Master Card.
CONDITIONS OF SALE: The Terms and Conditions on the reverse(or attached)are incorporated and made a part of this Agreement By signing below,you are agreeing to this
Roofing Proposal and Sales Agreement which consists of the statement of work and cost on this front page and the Term and Conditions on the reverse(or attached).
Payments shall be made to: Fields Roof Service,Inc. 25924 78th Ave S. Kent WA 98032 Contractor Reg.No.FIELDRS262L 1
Owner or Representative Date Fields Roof Service,Inc-Sales Approval Date
Fields Roof Service, Inc. - Terms and Conditions
1.Relationship of Parties.
The statement of work on the front page together with these Terms and Conditions make up the Contract between Fields Roof
Service,Inc.and the property owner or client designated on the front page("Client").This contractual relationship is an independent
contractor relationship and not a partnership,joint venture,employee-employer or other type of relationship.
2.Payment.
Payment is due immediately upon completion of the job.A down-payment may be required to secure material and equipment prior to
project initiation.If the work requires more than 30 days to complete,then FRS shall invoice client on monthly basis for work performed
during the prior month and payment shall be due upon receipt of invoice.Payments not received within 30 days of their due date shall
incur interest at 1.5%per month until paid.Any costs incurred by FRS to collect delinquent accounts,including reasonable attorneys
fees,court costs, lien costs and other collection related expenses shall be recoverable from the Client addition to the deliquent payment.
3.Limited Warranty.
FRS warrants that the installation of the roof will be performed in a workmanlike manner consistent with the standard of care of
the roofing industry.For a period of one(1)year[or period of time stated on proposal] following the installation or other work involving
the roof,FRS will,at no cost to the client,repair or replace any roof failure caused by a defective installation.In addition,FRS will provide
Client with any manufacturers'warranites that might apply to the roofing materials that are installed,provided that Client understands
that it must enforce these manufacturers warranties directly against the manufacturer;FRS will assist Client in this process.
4.Warranty Exclusions.
The limited warrany above explicity excludes damages caused by or due to(i)pre-existing conditions,such as defective roof support
systems and defective construction materials;(ii)improper building or residential construction(iii)mold,dry rot,mildew,or other
conditions caused by moisture an dimproper ventilation;(iv) termites and pests;and(v)hazardous substances and materials.
5.Client's Responsibilities.
Client shall be responsible for(i)providing an area for the storage of equipment and materials;(ii)obtaining permission from neighboring
landownwers if FRS's work requires the temporary use of such neighboring landowner's property;and(iii)correcting any existing defects,
such as dry rol and structural and code defects. (FRS may agree to correct these defects pursuant to a Change Order as provided below).
6.Change Orders.
Should the Client request any modifications to the work,or if FRS agrees to repair any existing defective conditions that are discovered
during construction,such as dry rot,code,or structural defects,this work shall be in addition to the statement of work on the front page
of this Contract and shall be documented in a Change Order signed by both parties.
7.Title to Materials.
Title to the roofing materials shall pass to the Client upon installation.Any surplus roofing materials that are not installed or used remain the property
of FRS and are not subject to any credit or refund in the contract price.
8.Clean Up.
Upon completion of the project,FRS will remove any surplus materials and debris and shall leave the exterior of the site in neat,broom
clean appearance. Any materials that fall from the ceiling within the building,including cathedral ceilings and any other materials that fall
within the confines of the interior of the building are the responsibility of the Client.
9.Existing Conditions.
FRS is not responsible for conditions existing before coming on to the site,including(i)ceiling damage due to the installation of the roof
or any repair of dry rot or other defective materials;(ii)existing chimney problems due to poor flashing or waterproofing and(iii)any
damage to driveways or pavement subsidence due to the vehicles required by FRS to transport an dinstall the roofing materials.
10.License,Insurance and Bonding.
FRS is properly licensed as a roofing contractor in the State of Washington(Lic#FEILDRS262L1),and is bonded and insured as
required by law.
11. Limitation of Remedies.
Client understands that its sole remedy for any defective work performed by FRS shall be enforcement of the warranty in parapgraph 3.
In addition,Client agrees that FRS's maximum aggregate liability to Client for any and all claims relating to FRS's work,including
claims for negligence and breach of contract shall be limited to the total amount of compensation paid to FRS under this Contract.
If Client desires an extended warranty or higher limitation of liability,FRS may agree to such for additional consideration paid to FRS,
and provided that such extended warranty or increased limitation of liability is documented in a Change Order signed by both parties.
•
C./.7PS TECHNICAL DATA SHEET
BUILDING PRODUCTS OF CANADA CORP. ASPHALT SHINGLES
MYSTIQUE 42 INCH (RL621 )
PHYSICAL PROPERTIES
Mystique is a 42 inch laminate Average coverage per s 2
shingle composed of a stable 3.06 m (32.9 ft)
9 P bundle(approx.)
fiberglass mat coated on both sides
with an elastomeric modified asphalt Exposure 152 mm(6")
and surfaced with mineral granules. Dimensions 1066.8 mm x 355.6 mm(42"x 14")
Mystique is covered by a Lifetime
Warranty. Its standard wind Bundles/Pallet 36
Warranty covers up to 180 km/hr
(110 mph)and its High Wind
Warranty covers up to 220 km/hr
(135 mph)as per special application
instructions. CHARACTERISTICS UNITS. RESULTS BP REQUIREMENTS TEST
METHOD
IMPERIAL MI I . P.4LR
Mystique can be applied on roof Tear strength ASTM
slopes greater than 4/12.It can also g lb Pass Pass 1700 4.0
be applied to roof slopes from 3/12 to (cross direction) D3462
4/12 following special low slope Tensile strength ASTM
application.Please refer to the CSA (machine direction) kN/m lb/in Pass Pass 10.5 60 D146
A123.51 standard or the application Tensile strength ASTM
instructions for further details. kNlm lb/in Pass Pass 7.0 40
(cross direction) D146
STORAGE: limempr
Fastener pull through 0°C N lbf Pass Pass 186 42 ASTM
Store on a flat surface no more than D3462
3 pallets high. Average net mass per unit 9/m' Ib1100ft' Pass Pass 4394 90 ASTM
area of finished shingles D228
Mass of glass mat per unit g/m2 lb/100ft' Pass Pass 85 1.7
ASTM
area D228
Asphalt mass per unit g/m' lb/100WPass Pass 732 15 ASTM
area D228
APPLICABLES STANDARDS
ASTM D3018;
ASTM D3462;
CSA A123.5M;
UL 790&CAN/ULC S107&ASTM E108,Fire Resistance Class A;
ASTM D3161 Class A,D and F;
UL 2390&ASTM D7158 Class H
Buildings Products of Canada Inc.
9510,St-Patrick street
LaSalle(Quebec),Canada
H8R 1R9
www.bpcan.com TDS-MYSTIQUE RL621-West-15-09-2015
0-50141:7 MATERIAL SAFETY DATA SHEET
FIBERGLASS SHINGLES
BUILDING PRODUCTS OF CANADA CORP.
Section I—Product Information
Brand Name: Mystique 42,Everest 42,Dakota,Yukon SB,Manoir,Accu-Ridge,Vanguard 42 IR and Starter Strips.
Manufacturer: Building Products of Canada Corp
9510,St-Patrick street
LaSalle(Quebec),Canada H8R 1 R9
Emergency phone number: CANUTEC 1-613-996-6666
Product Uses: Asphalt shingles.This product is use on sloped roofs for water shedding.
WHMIS Classification: This product is not controlled by the WHMIS.
Section II—Preparation Information
MSDS prepared by: F.Bosse
Phone number: 514-364-8768
Revision date: October 2015
Preparation date: November 2012
Section III—Hazardous Components
Component C.A.S.No Weight Species LD50 Oral LCso Inhalation Hour
Oxidized Asphalt 64742-93-4 25%to 40% Rat 5000 mg/kg 94,4 mg/m3 8
Crystalline Silica(quartz) 14808-60-7 <0.01% — Not available Not available —
As per OSHA and WHMIS the products in section I are considered consumable items and do not require MSDS. Since,all the
components mentioned in the table above are bounded in all of the products,when they are handled and used under normal conditions,
there is no evidence that any of the components are released in quantities that pose a risk to health and/or safety.
The finish products are not considered hazardous as per WHMIS and OSHA,29 CFR 1910.1200 legislations. However,we want to
disclose as much as possible information relating to health and safety,to ensure that the product is handled and used properly. This
MSDS contains valuable information for safe handling and proper use of the products. This MSDS should be retained and available for
employees and other users.
Section IV—Physical and Chemical Properties
Appearance at 25°C: Solid with colored granules on the surface
Odour: Light odour of petroleum product
pH: No object
Density: Not measured
Melting Point: >100°C
Freezing Point: No object
Boiling Point: No object
Evaporation Rate: No object
Vapor Tension: No object
Vapor Density: No object
Relative Density(water=1): >1
Solubility: Insoluble in water
Decomposition Temperature: Not measured
Viscosity: No object
MSDS-Fiberglass shingles-12-04-2016 Page 1 sur 3
8p� MATERIAL SAFETY DATA SHEET
FIBERGLASS SHINGLES
BUILDING PRODUCTS OF CANADA CORP.
Section V—Fire and Explosion Data
Flash Point: >250°C
Flammable Limits in air: No object
Auto-Inflammation Temperature: Not measured
Specific Dangers: Fire gives off normal products of combustion,carbon monoxide and dioxide(COX),nitrogen
oxides(NOX)and hydrogen sulfurs.
Fire Fighting Agents: Use dry chemical powder,carbon dioxide(CO2),foam and water spray.
Fire Fighting Equipments: Wear self-contained breathing apparatus and full protective clothing.
Section VI—Product Stability and Reactivity
Product Reactivity: The product is not classified as self-reactive
Product Stability: Stable
Hazardous reactions and polymerization: No object
Condition to avoid: Avoid storing the product at excessive temperature
Incompatible Materials: No object
Hazardous decomposition products: Normal decomposition products
Section VII—Health Hazard Data
Carcinogenicity-effect of chronic exposure to product: This product contains oxidized asphalt. The International Agency for Research
on Cancer(IARC)has classified it as a"probable human carcinogen"-2A occupational exposure to oxidized asphalt and its emissions
during roofing work. When working with this product,dust should be avoided and it is important to use adequate ventilation and I or an
appropriate organic vapour mask with a dust protection.
Oxidized Asphalt(64742-93-4):[Values are for asphalt fumes,since oxidized asphalt specific values are not available]
RSST: 5 mg/m3 TWA(fumes)
ACGIH: 0.5mg/m3 TWA(fumes on 8 hours)
NIOSH: 5mg/m3 TWA(fumes on 15 minutes)
Product contains crystalline silica(quartz). Crystalline silica is considered a hazard if inhaled. IARC has classified occupational exposure
to crystalline silica as an agent of group 1 human carcinogen. When working with this product,it is important to comply with the limits for
exposure to crystalline silica through adequate ventilation and/or wear a suitable dust mask.
Crystalline silica quartz(14808-60-7)
RSST: 0.1 mg/m3 TWA(inhalable fraction)
ACGIH: 0.025 mg/m3 TWA(inhalable fraction)
OSHA 0.10 mg/m3 TWA(proposed inhalable fraction);0.30 mg/m3 Exposure Limit TWA(total dust)
NIOSH: 0.05 mg/m3 TWA(total dust)50 mg/m3 IDLH(inhalable fraction)
Teratogenicity,embryotoxicity,mutagenicity: This product has no teratogenic,mutagenic,or embryotoxic known effects.
Section VIII—First Aid
Inhalation: In case of inhalation of gas or vapor,remove person to fresh air. If breathing is difficult or ceases,administer
oxygen. If symptoms persist,consult a physician.
Skin contact: Wash skin with soap and water. If irritation persists,consult a physician.
Eye contact: Flush eyes with water for 15 to 20 minutes. If irritation persists,consult a physician.
Ingestion: Ingestion is unlikely to occur. If ingestion occurs,consult a physician.
MSDS-Fiberglass shingles-12-04-2016 Page 2 sur 3
81 MATERIAL SAFETY DATA SHEET
FIBERGLASS SHINGLES
BUILDING PRODUCTS OF CANADA CORP.
Section IX—Handling Safety Measures
Respiratory Protection: If the exposure limit to dust and fumes is exceeded,if the space is poorly ventilated use a breathing apparatus
for organic vapor and dust.
Hands Protection: Wearing gloves is recommended to prevent excessive skin exposure.
Eye protection: In case of risk of projections,wearing safety glasses is recommended.
Protective clothing: Wear proper protective clothing.
Section X—Environmental and Disposal Information
Elimination: The finished product is a solid. To remove,use standard means approved for disposal. If the product has been
affected by heat or fire and the asphalt becomes liquid,allow it to cool down,then break into pieces and place
them in suitable containers.Dispose in a landfill or use any other method prescribed by regulation.
Environmental Effects: Do not allow product or runoff from fire entering sewers,lakes,streams or drinking water pipes. Secure sewers
and ditches to avoid contamination. Provincial and/or federal regulations may require that environmental
agencies or other agencies have to be notified of a spill. The area must be cleaned and restored to original
condition or to the satisfaction of authorities.
Section Xl—Storage
Storage: Store in a dry,well ventilated place away from sources of excessive heat. Product should be protected from the
weather and direct sunlight.
Since this product is a"Manufactured Article".Building Products of Canada Corp.is not required by law to produce a Material Safety Data Sheet. This Material Safety Data
Sheet is provided as customer service information.The recommendations and data presented are believed to be reliable.However,no warranty is expressed or implied
regarding the accuracy of the data or the results obtained from the use of this information.
MSDS-Fiberglass shingles-12-04-2016 Page 3 sur 3