Loading...
HomeMy WebLinkAbout6683 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 AGENDA BILL CITY OF BREMERTON 4 G CITY COUNCIL SUBJECT: Study Session Date: March 27, 2024 Goods & Services Agreement with COUNCIL MEETING Date: April 3, 2024 Cummins, Inc for Emergency Power Department: PW&U-Engineering Generation Equipment at multiple City water Presenter: Bill Davis supply sites Phone: (360) 473-2312 SUMMARY: This Agreement provides for purchase, delivery, and startup of Cummins emergency power generation equipment at five critical City water supply sites, including: (1) Pump Station 3 / Well 19; (2) Pump Station 8; (3) Pump Station 12; (4) Wells 15 and 17; and (5) Pump Station 17/ Well 22. The equipment will provide redundancy and uninterrupted service during power failures, as well as improve the water system resiliency during emergency and catastrophic events. The City has a sole source agreement for supply of Cummins emergency power generation equipment to support water and wastewater projects. The installation of the equipment will occur under a separate contract and be accomplished in 2025. ATTACHMENTS: 1. Agreement; 2. Location Map FISCAL IMPACTS (Include Budgeted Amount): The project is included in the 2024 Water Capital Budget. STUDY SESSION AGENDA: 0 Limited Presentation ❑ Full Presentation STUDY SESSION ACTION: 0 Consent Agenda ❑ General Business ❑ Public Hearing RECOMMENDED MOTION: Move to award the Goods and Services Agreement for emergency power generation equipment at multiple City water supply sites to Cummins, Inc in the amount of $391,914.43 (including sales tax); and authorize the Mayor to finalize and execute the agreement with sustainability the same terms and conditions as presented. COUNCIL ACTION: RApprove ❑ Deny ❑ Table ❑ Continue ❑ No Action Form Updated 01/02/2018 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 GOODS AND SERVICES AGREEMENT THIS AGREEMENT is entered into between the City of Bremerton, a Washington Municipal Corporation ("City"), and Cummins Inc. ("Vendor"), whose mailing address is: 1030 SE 34th Street, Suite A, Renton, WA 98057. The parties agree as follows: L VENDOR SERVICES. The Vendor shall provide the goods and materials and/or perform the following services for the City per Cummins Inc.'s Quotation Nos: Q-23 1 576-202403 1 5-1 237, Q-231582-20240315-1257, Q-231593-20240315-1325, Q-231587-20240315-1316, Q-231488- 202403 1 5-1 0 14, dated March 15, 2024("Vendor's Quotation"), including its terms and conditions attached in Exhibit A. II. TIME OF COMPLETION. Vendor shall deliver purchased emergency power generation equipment to City facilities within 365 calendar days from the date of written approval of equipment submittals by the City. Start-up, training, and delivery of electronic manuals shall be completed within 180 days after receipt of equipment by the City and shall constitute final acceptance of this Agreement. III. COMPENSATION. The City shall pay the Vendor $358,896.00, plus 9.2% Washington State sales tax, totaling $391,914.43, for the goods, materials and services contemplated in this Agreement. The Vendor shall invoice the City and the City shall pay the Vendor the according to the following schedule: 90%of total compensation upon initiation of contract; 5%upon equipment delivery to City facilities;the remaining 5%upon completion of startup and training. Payment by the City shall be made within 30 calendar days of receipt of invoice. A. Defective or Unauthorized Work. The City reserves its right to withhold payment from Vendor for any defective or unauthorized goods, materials or services. If Vendor is unable, for any reason, to complete any part of this Agreement, the City may obtain the goods, materials or services on its own or from a third party, and Vendor shall be liable to the City for any additional costs incurred by the City. "Additional costs" shall mean all reasonable costs, including legal costs and attorney fees, incurred by the City beyond the maximum Agreement price specified above. The City further reserves its right to deduct the cost to complete this Agreement, including any Additional Costs, from any and all amounts due or to become due the Vendor. IV. INDEPENDENT CONTRACTOR. Vendor is and shall be at all times acting as an independent contractor and not as an employee of the City. The Vendor shall secure at its expense, and shall be responsible for all payments of income tax, social security, state disability insurance compensation, unemployment compensation, and all other payroll deductions for the Vendor, officer, agents, employees and subcontractors. The Vendor shall also secure all applicable business licenses, if required, in connection with the contract services, including all required licenses for Vendor's officers, agents, employees and subcontractors. V. TERMINATION. The City may terminate this Agreement for good cause. "Good cause" Goods and Services Agreement with Cummins Inc. Page 1 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 shall include, without limitation, any one or more of the following events: A. The Vendor's refusal or failure to supply a sufficient number of properly skilled workers or proper materials for completion of this Agreement. B. The Vendor's failure to complete this Agreement within the time specified in this Agreement. C. The Vendor's failure to make full and prompt payment to subcontractors or for material or labor. D. The Vendor's failure to comply with federal, state or local laws,rules or regulations. E. The Vendor's filing for bankruptcy or becoming adjudged bankrupt. If the City terminates this Agreement for good cause, the Vendor shall not receive any further monies due under this Agreement until the goods, materials, and services required by this Agreement are completed and fully performed by the City or a third party of the City's choosing. VI. CHANGES. The City may issue a written change order for any change in the goods, materials or services to be provided during the performance of this Agreement. If the Vendor determines,for any reason,that a change order is necessary, Vendor must submit a written change order request to an authorized agent of the City within fourteen (14) calendar days of the date Vendor knew or should have known of the facts and events giving rise to the requested change. If the City determines that the change increases or decreases the Vendor's costs or time for performance, the City will make an equitable adjustment. The City will attempt, in good faith,to reach agreement with the Vendor on all equitable adjustments. However, if the parties are unable to agree, the City will determine the equitable adjustment as it deems appropriate. The Vendor shall proceed with the change order work upon receiving either a written change order from the City or an oral order from the City before actually receiving the written change order. If the Vendor fails to require a change order within the time allowed, the Vendor waives its right to make any claim or submit subsequent change order requests for that portion of the contract work. If the Vendor disagrees with the equitable adjustment the Vendor must complete the change order work; however, the Vendor may elect to protest the adjustment as provided below: A. Procedure and Protest by the Vendor. If the Vendor disagrees with anything required by a change order, another written order, or an oral order from the City, including any direction, instruction, interpretation, or determination by the City, the Vendor shall: 1. Immediately give a signed written notice of protest to the City; 2. Supplement the written protest within fourteen (14) calendar days with a written statement that provides the following information: a. The date of the Vendor's protest. b. The nature and circumstances that caused the protest. c. The provisions in this Agreement that support the protest. Goods and Services Agreement with Cummins Inc. Page 2 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 d. The estimated dollar cost, if any, of the protested work and how that estimate was determined. e. An analysis of the progress schedule showing the schedule change or disruption if the Vendor is asserting a schedule change or disruption. 3. The Vendor shall keep complete records of extra costs and time incurred as a result of the protested work. The City shall have access to any of the Vendor's records needed for evaluating the protest. The City will evaluate all protests, provided the procedures in this section are followed. If the City determines that a protest is valid, the City will adjust payment for work or time by an equitable adjustment. No adjustment will be made for an invalid protest. B. Vendor's Duty to Complete Protested Work. In spite of any protest, the Vendor shall proceed promptly to provide the goods, materials and services required by the City under this Agreement. C. Vendor's Acceptance of Changes. The Vendor accepts all requirements of a change order by: (1) endorsing it, (2) writing a separate acceptance, or (3) not protesting in the way this section provides. A change order that is accepted by Vendor as provided in this section shall constitute full payment and final settlement of all claims for contract time and for direct, indirect and consequential costs, including costs of delays related to any work, either covered or affected by the change. D. Failure to Protest Constitutes Waiver. By not protesting as this section provides, the Vendor also waives any additional entitlement and accepts from the City any written or oral order(including directions, instructions, interpretations, and determination). E. Failure to Follow Procedures Constitutes Waiver. By failing to follow the procedures of this section, the Vendor completely waives any claims for protested work and accepts from the City any written or oral order (including directions, instructions, interpretations, and determination). VII. CLAIMS. The Vendor shall give written notice to the City of all claims other than change orders within fourteen (14) calendar days of the occurrence of the events giving rise to the claims. Any claim for damages, additional payment for any reason, or extension of time, whether under this Agreement or otherwise, shall be conclusively deemed to have been waived by the Vendor unless a timely written claim is made in strict accordance with the applicable provisions of this Agreement; or, if(and only if) no such provision is applicable, unless that claim is set forth in detail in writing and received by the City within seven (7) calendar days from the date Vendor knew, or should have known, of the facts giving rise to the claim. At a minimum, a Vendor's written claim must include the information set forth regarding protests in Section VI(A)(2)(a)-(e). FAILURE TO PROVIDE A COMPLETE, WRITTEN NOTIFICATION OF CLAIM WITHIN THE TIME ALLOWED SHALL BE AN ABSOLUTE WAIVER OF ANY CLAIMS ARISING IN ANY WAY FROM THE FACTS OR EVENTS SURROUNDING THAT CLAIM Goods and Services Agreement with Cummins Inc. Page 3 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 OR CAUSED BY THAT DELAY. Vendor must, in any event, file any claim or bring any suit arising from or connected with this Agreement within 120 calendar days from the date the contract work is complete. VIII. WARRANTY. The City and Cummins Inc. mutually agree on the warranty statement attached as Exhibit C. The Vendor shall begin to correct any defects within seven (7) calendar days of its receipt of notice from the City of the defect. If the Vendor does not accomplish the corrections within a reasonable time, the City may complete the corrections and the Vendor shall pay all costs incurred by the City in order to accomplish the correction. IX. INDEMNIFICATION. Vendor shall defend, indemnify and hold the City, its officers, officials, employees, agents and volunteers harmless from any and all third party claims, injuries, damages, losses or suits, including all legal costs and attorney fees, arising out of or in connection with bodily injury, death, or tangible property damage to the extent caused by defective goods manufactured by Vendor and delivered to the City under this Agreement. Vendor's obligation to indemnify shall not extend to that portion of damages caused by the City's sole negligence. The City's inspection or acceptance of any of Vendor's work when completed shall not be grounds to avoid any of these covenants of indemnification. Should a court of competent jurisdiction determine that this Agreement is subject to RCW 4.24.115, then, in the event of liability for damages arising out of bodily injury to persons or damages to property caused by or resulting from the concurrent negligence of the Vendor and the City, its officers, officials, employees, agents and volunteers,the Vendor's liability hereunder shall be only to the extent of the Vendor's negligence. IT IS FURTHER SPECIFICALLY AND EXPRESSLY UNDERSTOOD THAT THIS INDEMNIFICATION CONSTITUTES THE VENDOR'S WAIVER OF IMMUNITY UNDER INDUSTRIAL INSURANCE TITLE 51 RCW, SOLELY FOR THE PURPOSES OF THIS INDEMNIFICATION. THE PARTIES ACKNOWLEDGE THAT THEY HAVE MUTUALLY NEGOTIATED THIS WAIVER. The provisions of this section shall survive the expiration or termination of this Agreement. X. INSURANCE. The Vendor shall procure and maintain for the duration of this Agreement, insurance against claims for injuries to persons or damage to property that may arise from or in connection with the performance of the contract work by the Vendor, its agents, representatives, employees or subcontractors. Before beginning work on the project described in this Agreement, the Vendor shall provide a Certificate of Insurance evidencing: A. Automobile Liability insurance with limits no less than $1,000,000 combined single limit per accident for bodily injury and property damage; and Goods and Services Agreement with Cummins Inc. Page 4 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 B. Commercial General Liability insurance written on an occurrence basis with limits no less than $1,000,000 combined single limit per occurrence and $2,000,000 aggregate for personal injury, bodily injury and property damage. Coverage shall include but not be limited to: blanket contractual; products/completed operations/broad form property damage; and employer's liability. C. Excess Liability insurance with limits not less than $1,000,000 limit per occurrence and aggregate. D. Workers Compensation insurance as statutorily required by the Industrial Insurance Act of the State of Washington, Title 51, Revised Code of Washington and employer's liability with limits not less than $1,000,000. Any payment of deductible or self-insured retention shall be the sole responsibility of the Vendor. All required policies shall be provided on an "occurrence" basis except professional liability insurance (if required), which shall be provided on a"claims-made"basis. The City shall be named as an additional insured on the Commercial General Liability insurance policy, as respects work performed by or on behalf of the Vendor and a copy of the endorsement naming the City as additional insured shall be attached to the Certificate of Insurance. The City reserves the right to receive a certified copy of all the required insurance policies. The Vendor's Commercial General Liability insurance shall contain a clause stating that coverage shall apply separately to each insured against whom claim is made or suit is brought, except with respects to the limits of the insurer's liability. The Vendor's insurance shall be primary and non-contributory insurance as respects the City and shall contain a waiver of subrogation against the City for claims arising out of any operations, liabilities and obligations to which coverage applies. It shall be an affirmative obligation upon Vendor to advise the City's Risk Manager by fax at(360)473-5161, or by certified mail, return receipt requested to City of Bremerton, Attn: Risk Management, 345 6th Street, Suite 100, Bremerton, WA 98337 within two days of the cancellation, suspension or substantive change of any insurance policy required herein, and failure to do so shall be construed to be a breach of this Agreement. XI. MISCELLANEOUS. A. Licenses and Taxes. Vendor shall possess a current Bremerton Business License and any regulatory license required to fulfill Vendor's obligations under this Agreement. B&O taxes shall be paid when due, and Vendor, by this Agreement, assigns any payments due under this Agreement to the City Clerk for payment of such taxes which have been declared delinquent. B. Conflict and Precedence. In the event of a conflict between the contract documents, Goods and Services Agreement with Cummins Inc. Page 5 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 the document which rates higher on the following list shall take precedence: 1. Amendments/ Change Orders to Goods and Services Agreement 2. Goods and Services Agreement 3. Specifications 4. Terms and Conditions 5. Vendor's Proposal C. Documents Incorporated by Reference. The following documents are incorporated by reference, including but not limited to: 1. Terms and Conditions, 2. Specifications, 3. Proposal, and 4. Non-Collusion Affidavit. D. Use of Photographs and Images. Vendor shall not use or distribute photographs or images depicting City officials, personnel, property, or equipment whether prepared by Vendor or provided by City without prior written consent of the City. The City will not unreasonably withhold its consent. E. Equal Employment Opportunity Statement. In the hiring of employees for the performance of work under this Agreement, the Vendor, its subcontractors, or any person acting on behalf of Vendor shall not discriminate in any employment practice on the basis of age (40+), sex, race, creed, color, national origin, sexual orientation/gender identity, marital status, military status, or the presence of any physical, mental or sensory disability. F. ADA Statement. The City of Bremerton does not discriminate on the basis of disability in programs and activities, which it operates pursuant to the requirements of the Americans with Disabilities Act of 1990, and ADA Amendments Act. This policy extends to both employment and admission to participation in the programs, services and activities of the City of Bremerton. Reasonable accommodation for employees or applicants for employment will be provided. G. Compliance with Laws. Vendor shall comply with all federal, state and local laws, rules and regulations throughout every aspect in the performance of this Agreement. H. Prevailing Wages. Vendor shall file a "Statement of Intent to Pay Prevailing Wages"with the State of Washington Department of Labor& Industries prior to commencing the contract work. Vendor shall pay prevailing wages and comply with Chapter 39.12 of the Revised Code of Washington, as well as any other applicable prevailing wage rate provisions. The latest prevailing wage rate revision for Kitsap County issued by the Department of Labor and Industries may be found at the State of Washington Department of Labor and Industries website. L Work Performed at Vendor's Risk. Vendor shall take all precautions necessary and shall be responsible for the safety of its employees, agents, and subcontractors in the performance of this Agreement. All work shall be done at Vendor's own risk, and Vendor shall be responsible for any loss of or damage to materials, tools, or other articles used or held for use in connection Goods and Services Agreement with Cummins Inc. Page 6 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 with the work. J. Governing Law. This Agreement shall be governed and construed in accordance with the laws of the State of Washington. If any dispute arises between the City and Vendor under any of the provisions of this Agreement, resolution of that dispute shall be available exclusively under the jurisdiction, venue and rules of the Kitsap County Superior Court, Kitsap County, Washington. K. Attorney's Fees. In any claim or lawsuit for damages arising from the parties' performance of this Agreement, each party shall be responsible for payment of its own legal costs and attorney's fees incurred in defending or bringing such claim or lawsuit; however, nothing in this subsection shall limit the City's right to indemnification under Section IX of this Agreement. L. Written Notice. All communications regarding this Agreement shall be sent to the parties at the addresses listed below, unless otherwise notified. Any written notice shall become effective upon delivery, but in any event three (3) calendar days after the date of mailing by registered or certified mail, and shall be deemed sufficiently given if sent to the addressee at the address stated in this Agreement. Notices to be sent to: Notices to be sent to: CITY: VENDOR: Attn: Angela Hoover Attn: Zach Shulte City of Bremerton Cummins Inc. 345 6th Street, Suite 100 1030 SW 34th Street, Suite A Bremerton, WA 98337-1891 Renton, WA 98057 M. Assignment. Any assignment of this Agreement by the Vendor without the written consent of the City shall be void. N. Modification. No waiver, alteration, or modification of any of the provisions of this Agreement shall be binding unless in writing and signed by a duly authorized representative of the City and Vendor. O. Severability. If any one or more sections, subsections, or sentences of this Agreement are held to be unconstitutional or invalid, that decision shall not affect the validity of the remaining portion of this Agreement and the remainder shall remain in full force and effect. P. Suspension & Debarment. For contracts involving Washington State or Federal funding, Vendor hereby certifies, by signing this agreement, that neither it nor its principals are presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation in this transaction by any Washington State, Federal department, or agency. Vendor shall provide immediate written notice to the City if at any time it learns that it is or has become ineligible for certification. Should Vendor enter into a covered transaction with another firm, Vendor agrees by signing this agreement that it will verify that the firm with whom it intends to do business is not debarred, suspended, ineligible, excluded or disqualified. Goods and Services Agreement with Cummins Inc. Page 7 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Q. Entire Agreement. The written provisions and terms of this Agreement, together with any attached Exhibits, supersede all prior verbal statements by any representative of the City, and those statements shall not be construed as forming a part of or altering in any manner this Agreement. This Agreement and any attached Exhibits contain the entire Agreement between the parties. Should any language in any Exhibit to this Agreement conflict with any language contained in this Agreement, the terms of this Agreement shall prevail. R. Limitation of Liability. NOTWITHSTANDING ANY OTHER TERM OF THIS AGREEMENT, IN NO EVENT SHALL VENDOR, ITS OFFICERS, DIRECTORS, EMPLOYEES, OR AGENTS BE LIABLE TO CITY OR ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, LIQUIDATD, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION DOWNTIME, LOSS OF PROFIT OR REVENUE, LOSS OF DATA, LOSS OF OPPORTUNITY, DAMAGE TO GOODWILL, ENHANCED DAMAGES, MONETARY REQUESTS RELATING TO RECALL EXPENSES AND REPAIRS TO PROPERTY, AND/OR DAMAGES CAUSED BY DELAY) IN ANY WAY RELATED TO OR ARISING FROM VENDOR'S SUPPLY OF EQUIPMENT UNDER THIS AGREEMENT OR THE USE OR PERFORMANCE OF EQUIPMENT SUPPLIED UNDER THIS AGREEMENT. IN NO EVENT SHALL VENDOR'S LIABILITY TO CITY OR ANY THIRD PARTY CLAIMING DIRECTLY THROUGH CITY OR ON CITY'S BEHALF UNDER THIS AGREEMENT EXCEED THE TOTAL COST OF EQUIPMENT SUPPLIED BY CUMMINS UNDER THIS AGREEMENT GIVING RISE TO THE CLAIM. BY ACCEPTANCE OF THIS AGREEMENT, CITY ACKNOWLEDGES CITY'S SOLE RECOVERY AGAINST VENDOR FOR ANY LOSS SHALL BE THE REMEDY PROVIDED HEREIN EVEN IF THE EXCLUSIVE REMEDY UNDER THE WARRANTY IS DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE. IN WITNESS WHEREOF, the parties below have executed this Agreement. CITY: VENDOR: CITY OF BREMERTON CUMMINS INC. DocuSigned by: DocuSigned by: '144, s'dwth. B Y E8E74 By: *. F�kE7475.. Print Name:BAF46reg Wheeler Print Name: Zach Schulte Its: Ma4y�r024 Its: Senior Sales Account Manager 4/2424 Date: Date: APPROVED AS TO FORM: ATTEST: DocuSigned by: DocuSigned by: By: by ��' B : dlA.� L Ur Y• b2AUbE8381 t30462... Y• 24E-i35 fi 1 E45C41 F... KYLIE J. FINNELL, Bremerton City Attorney ANGELA HOOVER, City Clerk Goods and Services Agreement with Cummins Inc. Page 8 of 8 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 EXHIBIT A EMERGENCY POWER PLAN IMPLEMENTATION SCOPE OF SERVICES AND FEE BREAKDOWN FROM CUMMINS, INC. March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 EXHIBIT A Scope of Goods, Materials, and Services from Cummins Inc: Provide and deliver emergency power generation equipment to the City of Bremerton for five potable water sites. The equipment, installation location, and cost quote are shown in the following table. Technical data sheets which describe the equipment and services to be provided for each location are attached. Installation Cummins Quote# Cost Quote location Genset# PS 3/Well 19 C150D6D Q-231576-20240315-1237 $74,753.00 PS 8 C150D6D Q-231582-20240315-1257 $74,753.00 PS 12 C50D6C Q-231593-20240315-1325 $54,769.00 Well 15/17 C125D6D Q-231587-20240315-1316 $79,868.00 PS 17/Well 22 C150D6D Q-231488-20240315-1014 $74,753.00 Subtotal (pre-tax) $358,896.00 1. All equipment shall be delivered to the City of Bremerton Advanced Disinfection Facility located at 8301 West Belfair Valley Road, Bremerton, WA 98312. 2. Coordinate delivery with City of Bremerton staff Chad Hantelman: Desk Phone: (360) 473-5493; Mobile Phone: (360) 7710-8805; Email: chad.hantelman@ci.bremerton.wa.us 3. City staff must be present during the delivery and off-loading. 4. Provide minimum 5 business days notice of delivery. 5. The City will provide a forklift for off-loading upon request. Provide minimum 5 business days notice if a forklift is required. 6. Cummins may deliver equipment in installments. 7. The City will inspect the equipment upon delivery, before offloading, for damage, defects, and shortage. Any and all claims which could have been discovered by such inspection shall be deemed absolutely and unconditionally waived unless noted by Customer on the bill of lading. Where Equipment is alleged to be non-conforming or defective, written notice of defect must be given to Cummins within seven (7) days from date of delivery after which time Equipment shall be deemed accepted. Cummins shall have a commercially reasonable period of time in which to correct such non-conformity or defect. If non-conformity or defect is not eliminated to Customer's reasonable satisfaction, Customer may reject the Equipment(but shall protect the Equipment until returned to Cummins) or allow Cummins another opportunity to undertake corrective action. In the event startup of the Equipment is included in the services, acceptance shall be deemed to have occurred upon successful startup. Goods and Services Agreement with Cummins Inc. Page 1 of 1 Equipment Procurement forMulti-Site Emergency Power Generation March 2024 Exhibit A DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power 00° Sales and Implementation W. Service Quotation: Q-231576-20240315-1237 PS 3 and Well 19 March 15,2024 Prepared by Zach Schulte (206) 794-9801 zach.t.schulte@cummins.com We are pleased to provide you this quotation based on your inquiry. Item Description Qty 1 C150D6D, Diesel Genset,60Hz, 150kW 1 U.S. EPA,Stationary Emergency Application C150D6D, Diesel Genset, 60Hz, 150kW Duty Rating -Standby Power(ESP) Emission Certification, EPA,Tier 3, NSPS CI Stationary Emergency Listing- UL 2200 NFPA 110 Type 10 Level 1 Capable IBC Seismic Certification Exciter/Regulator- Permanent Magnet Generator, 3 Phase Sensor Voltage-277/480, 3 Phase,Wye, 4 Wire Alternator-60Hz, 12L, 480/277V, 105C, 40C Ambient, Increased Motor Starting (I MS) Aluminum Sound Attenuated Level 2 Enclosure, with Exhaust System Enclosure Color-Green, Aluminum Enclosure-Wind Load 180 MPH,ASCE7-10 Skidbase- Housing Ready Fuel Tank- Regional, Dual Wall, Sub Base, 24 Hour Minimum High Fuel Level Alarm Panel Fuel Water Separator High Fuel Level Switch, 90% Low Fuel Level Switch, 40% Mechanical Fuel Gauge 5 Gallon Lockable Spill Containment Fuel Fill Box Fuel Tank Vent Extension Kit, 12ft External Vents, 1 Normal, 2 Emergency Valve- Fuel Tank, Over Fill Protection Valve, 95% Switch - Fuel Tank, Rupture Basin Control Mounting - Left Facing PowerCommand 2.3 Controller Gauge-Oil Pressure Stop Switch-Emergency Relays-Auxiliary, Qty 2, 25A- 15V DC/10A-30V DC Signals-Auxiliary, 8 Inputs/8 Outputs Control Display Language-English Load Connection -Single Circuit Breaker, Location A, 125A-400A, 3P, LSI, 600 Volts AC, 100%, UL Bottom Entry, Right Engine Governor- Electronic, lsochronous Engine Starter- 12 Volt DC Motor Engine Air Cleaner- Normal Duty Battery Charging Alternator Battery Charger-6 Amp, Regulated Engine Cooling- Radiator, High Ambient Air Temperature, Ship Fitted Shutdown - Low Coolant Level Extension-Coolant Drain Engine Coolant-50%Antifreeze, 50%Water Mixture Coolant Heater Engine Oil Genset Warranty-2 Years Base Literature- English Packing -Skid, Poly Bag Battery Rack Quotation: Q-231576-20240315-1237 Page 1 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231576-20240315-1237 Extension-Oil Drain Green Sound Level 2 Intake Baffle-Ship Loose Ship Loose-Vent Kit A 2 OTECSEB,OTEC Service Entrance Transfer Switch-Electronic Control: 225A 1 OTECSE225, Service Entrance TransferSwitch, PowerCommand, 225 Amp Listing - UL 1008 IBC Seismic Certification Application- Utility to Genset Cabinet-Type 3R Poles-4 (Switched Neutral) Frequency-60 Hz System-3 Phase, 3 or 4 Wire Voltage-480 Volts AC Genset Starting Battery- 12V DC PC40 Control Aux Relay- Emergency Position- 12 Volts DC Aux Relay- Normal Position - 12 Volts DC Interface-Communications Network, MODBUS RTU Module Relay- Elevator Signal Transfer Switch Warranty-2 Year Comprehensive 3 Kit, FUEL SYSTEM 1 4 KIT, ENCLOSURE(SL2 Duct) 1 5 Annunciator-panel mount with enclosure(RS485) 1 6 Factory direct deliver to site,off-loading by others. No additional storage, handling or re-routing included. 1 7 Generator batteries, Group 34 2 8 Start up and 2 hour load test. Customer training to take place after load test is completed. One tech, one 1 day on site. TOTAL: $ 74,753.00 Quote value does not include any tax. EXCEPTIONS AND CLARIFICATIONS: Electrical drawing E-211 reviewed for this proposal. No specifications provided or reviewed. COVID 19 SUPPLEMENTAL STATEMENT AS A RESULT OF THE OUTBREAK OF THE DISEASE COVID-19 ARISING FROM THE NOVEL CORONAVIRUS,TEMPORARY DELAYS IN DELIVERY, LABOUR OR SERVICES FROM CUMMINS AND ITS SUB-SUPPLIERS OR SUBCONTRACTORS MAY OCCUR. AMONG OTHER FACTORS, CUMMINS' DELIVERY OBLIGATIONS ARE SUBJECT TO CORRECT AND PUNCTUAL SUPPLY FROM OUR SUB-SUPPLIERS OR SUBCONTRACTORS,AND CUMMINS RESERVES THE RIGHT TO MAKE PARTIAL DELIVERIES OR MODIFY ITS LABOUR OR SERVICE.WHILE CUMMINS SHALL MAKE EVERY COMMERCIALLY REASONABLE EFFORT TO MEET THE DELIVERY, SERVICE OR COMPLETION OBLIGATIONS SET FORTH HEREIN, SUCH DATES ARE SUBJECT TO CHANGE. INTERNATIONAL BUILDING CODE(IBC)CERTIFICATION The products in this quotation identified as meeting the requirements of the 2009 IBC have been certified by their respective manufactures via a combination of analytical testing and shaker table testing. Not all products have been shaker table tested. OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT(OSHPD) OSHPD seismic requirements are continuing to evolve. Please contact Cummins for the most current requirements for meeting OSHPD applications. SELECTIVE COORDINATION FOR NATIONAL ELECTRIC CODE(NEC)ARTICLE 700 AND 701 LOADS Cummins generators are equipped with the manufacturer's recommended circuit breaker. Information regarding this device can be supplied upon request.This quotation is not valid if any changes to this circuit breaker(s) is required to coordinate with other devices in the electrical distribution system. If changes are required, the customer must provide a copy of the coordination study listing the manufacturers part number of the disconnect device to be supplied with the generator and a revised quotation will be issued. TRANSFER SWITCH WITHSTAND AND CLOSE RATINGS Quotation: Q-231576-20240315-1237 Page 2 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power Sales and Implementation W. Service Quotation: Q-231576-20240315-1237 Transfer switch(es), if included in this quotation, require a withstand and closing rating (WCR) capable of meeting the available upstream fault current(kAIC).The WCR may be based on a specific breaker rating or a time-based rating, and it is the responsibility of a qualified facility designer or engineer to verify compatibility. In the event that the proposed transfer switch(es)are not compatible, the transfer switch(es)will need to be re-quoted to ensure compatibility.A full listing of the WCR can be provided upon request and will be included as part of the submittal package. CUMMINS STANDARD EXCLUSIONS Exhaust System All off-engine piping, hangers,flanges, gaskets, bolts, insulation, other materials and labor to install. Fuel System All fuel piping and materials not limited to; supply, return,venting, valves,coolers,filters, pumps, fittings, primary fuel regulator,storage tank&senders, external to genset package.All fuel for testing and initial fill. Fuel tank vent extensions and flame arrestors unless specifically listed in the Bill of Materials. Cooling System Intake louvers, exhaust louvers,air dampers, sheet metal ducting, flex adapters, sound attenuators/baffles.All off engine piping,flexible connections, labor and coolant for remote cooling systems. Electrical All off-engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Mounting Mounting bolts and anchors. Vibration isolators (if included) may be shipped loose for installation at the jobsite by others. Seismic engineering calculations. Electrical Testing Not limited to International Electrical Testing Association (NETA), infrared scanning, harmonic content or other independent agency testing of switchgear, switchboards, protective relays, circuit breaker, electrical coordination studies, arc flash studies and reactive load site testing. Environmental Testing Environmental Protection Agency (EPA), local air quality district or other Authority Having Jurisdiction (AHJ), including acoustical. Programming All protective relay settings, breaker settings, PLC programming or other user configurable device programming. Documentation Electronic submittals and operation and maintenance manuals will be provided. Printed copies are available upon request, additional charges may apply. Miscellaneous Site specific labeling. Exhaust backpressure, airflow restriction or vibration analysis Design Cummins is not responsible for system design or engineering and does not guarantee system performance standards. Cummins will supply documentation and reasonable assistance to others responsible for system engineering, design and performance. Taxes and Permit Any applicable sales tax, permits, fees, licenses. Bonds Any bid bond, payment or performance bond or other type of bond. All items listed above are excluded and will only be supplied by Cummins if agreed upon, in writing, by a sales representative for Cummins. LEAD TIME: Submittal Typical submittal lead time is 3-4 weeks after receipt of purchase order. Equipment Current lead-time for the generator is 36-40 weeks after submittal approval and release for production. Please feel free to contact me if you require any additional information; or if you have any further questions or concerns that I may be of assistance with. Thank you for choosing Cummins. Submitted by: Zach Schulte, Senior Sales Account Manager—Power Generation zach.t.sch ulteacum m i ns.com (206)794-9801 Quotation: Q-231576-20240315-1237 Page 3 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W� Service Quotation: Q-231576-20240315-1237 SUBMITTALS. An order for the equipment covered by this quotation will be accepted on a hold for release basis. Your order will not be released and scheduled for production until written approval to proceed is received in our office. Such submittal approval shall constitute acceptance of the terms and conditions of this quotation unless the parties otherwise agree in writing. THERE ARE ADDITIONAL CONTRACT TERMS AND CONDITIONS ATTACHED TO THIS QUOTATION, INCLUDING LIMITATIONS OF WARRANTIES AND LIABILITIES,WHICH ARE EXPRESSLY INCORPORATED HEREIN. BY ACCEPTING THIS QUOTATION, CUSTOMER ACKNOWLEDGES THAT THE CONTRACT TERMS AND CONDITIONS HAVE BEEN READ, FULLY UNDERSTOOD AND ACCEPTED. Quotation: Q-231576-20240315-1237 Page 4 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231582-20240315-1257 PS 8 March 15,2024 Prepared by Zach Schulte (206) 794-9801 zach.t.schulte@cummins.com We are pleased to provide you this quotation based on your inquiry. Item Description Qty 1 C150D6D, Diesel Genset,60Hz, 150kW 1 U.S. EPA,Stationary Emergency Application C150D6D, Diesel Genset, 60Hz, 150kW Duty Rating -Standby Power(ESP) Emission Certification, EPA,Tier 3, NSPS CI Stationary Emergency Listing- UL 2200 NFPA 110 Type 10 Level 1 Capable IBC Seismic Certification Exciter/Regulator- Permanent Magnet Generator, 3 Phase Sensor Voltage-277/480, 3 Phase,Wye, 4 Wire Alternator-60Hz, 12L, 480/277V, 105C, 40C Ambient, Increased Motor Starting (I MS) Aluminum Sound Attenuated Level 2 Enclosure, with Exhaust System Enclosure Color-Green, Aluminum Enclosure-Wind Load 180 MPH,ASCE7-10 Skidbase- Housing Ready Fuel Tank- Regional, Dual Wall, Sub Base, 24 Hour Minimum High Fuel Level Alarm Panel Fuel Water Separator High Fuel Level Switch, 90% Low Fuel Level Switch, 40% Mechanical Fuel Gauge 5 Gallon Lockable Spill Containment Fuel Fill Box Fuel Tank Vent Extension Kit, 12ft External Vents, 1 Normal, 2 Emergency Valve- Fuel Tank, Over Fill Protection Valve, 95% Switch - Fuel Tank, Rupture Basin Control Mounting - Left Facing PowerCommand 2.3 Controller Gauge-Oil Pressure Stop Switch-Emergency Relays-Auxiliary, Qty 2, 25A- 15V DC/10A-30V DC Signals-Auxiliary, 8 Inputs/8 Outputs Control Display Language-English Load Connection -Single Circuit Breaker, Location A, 125A-400A, 3P, LSI, 600 Volts AC, 100%, UL Bottom Entry, Right Engine Governor- Electronic, lsochronous Engine Starter- 12 Volt DC Motor Engine Air Cleaner- Normal Duty Battery Charging Alternator Battery Charger-6 Amp, Regulated Engine Cooling- Radiator, High Ambient Air Temperature, Ship Fitted Shutdown - Low Coolant Level Extension-Coolant Drain Engine Coolant-50%Antifreeze, 50%Water Mixture Coolant Heater Engine Oil Genset Warranty-2 Years Base Literature- English Packing -Skid, Poly Bag Battery Rack Quotation: Q-231582-20240315-1257 Page 1 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231582-20240315-1257 Extension-Oil Drain Green Sound Level 2 Intake Baffle-Ship Loose Ship Loose-Vent Kit A 2 OTECSEB,OTEC Service Entrance Transfer Switch-Electronic Control: 225A 1 OTECSE225, Service Entrance TransferSwitch, PowerCommand, 225 Amp Listing - UL 1008 IBC Seismic Certification Application- Utility to Genset Cabinet-Type 1 Poles-4 (Switched Neutral) Frequency-60 Hz System-3 Phase, 3 or 4 Wire Voltage-480 Volts AC Genset Starting Battery- 12V DC PC40 Control Aux Relay- Emergency Position- 12 Volts DC Aux Relay- Normal Position - 12 Volts DC Interface-Communications Network, MODBUS RTU Module Relay- Elevator Signal Transfer Switch Warranty-2 Year Comprehensive 3 Kit, FUEL SYSTEM 1 4 KIT, ENCLOSURE(SL2 Duct) 1 5 Annunciator-panel mount with enclosure(RS485) 1 6 Factory direct deliver to site,off-loading by others. No additional storage, handling or re-routing included. 1 7 Generator batteries, Group 34 2 8 Start up and 2 hour load test. Customer training to take place after load test is completed. One tech, one 1 day on site. TOTAL: $ 74,753.00 Quote value does not include any tax. EXCEPTIONS AND CLARIFICATIONS: Electrical drawing E-221 reviewed for this proposal. No specifications provided or reviewed. COVID 19 SUPPLEMENTAL STATEMENT AS A RESULT OF THE OUTBREAK OF THE DISEASE COVID-19 ARISING FROM THE NOVEL CORONAVIRUS,TEMPORARY DELAYS IN DELIVERY, LABOUR OR SERVICES FROM CUMMINS AND ITS SUB-SUPPLIERS OR SUBCONTRACTORS MAY OCCUR. AMONG OTHER FACTORS, CUMMINS' DELIVERY OBLIGATIONS ARE SUBJECT TO CORRECT AND PUNCTUAL SUPPLY FROM OUR SUB-SUPPLIERS OR SUBCONTRACTORS,AND CUMMINS RESERVES THE RIGHT TO MAKE PARTIAL DELIVERIES OR MODIFY ITS LABOUR OR SERVICE.WHILE CUMMINS SHALL MAKE EVERY COMMERCIALLY REASONABLE EFFORT TO MEET THE DELIVERY, SERVICE OR COMPLETION OBLIGATIONS SET FORTH HEREIN, SUCH DATES ARE SUBJECT TO CHANGE. INTERNATIONAL BUILDING CODE(IBC)CERTIFICATION The products in this quotation identified as meeting the requirements of the 2009 IBC have been certified by their respective manufactures via a combination of analytical testing and shaker table testing. Not all products have been shaker table tested. OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT(OSHPD) OSHPD seismic requirements are continuing to evolve. Please contact Cummins for the most current requirements for meeting OSHPD applications. SELECTIVE COORDINATION FOR NATIONAL ELECTRIC CODE(NEC)ARTICLE 700 AND 701 LOADS Cummins generators are equipped with the manufacturer's recommended circuit breaker. Information regarding this device can be supplied upon request.This quotation is not valid if any changes to this circuit breaker(s) is required to coordinate with other devices in the electrical distribution system. If changes are required, the customer must provide a copy of the coordination study listing the manufacturers part number of the disconnect device to be supplied with the generator and a revised quotation will be issued. TRANSFER SWITCH WITHSTAND AND CLOSE RATINGS Quotation: Q-231582-20240315-1257 Page 2 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power Sales and Implementation W. Service Quotation: Q-231582-20240315-1257 Transfer switch(es), if included in this quotation, require a withstand and closing rating (WCR) capable of meeting the available upstream fault current(kAIC).The WCR may be based on a specific breaker rating or a time-based rating, and it is the responsibility of a qualified facility designer or engineer to verify compatibility. In the event that the proposed transfer switch(es)are not compatible, the transfer switch(es)will need to be re-quoted to ensure compatibility.A full listing of the WCR can be provided upon request and will be included as part of the submittal package. CUMMINS STANDARD EXCLUSIONS Exhaust System All off-engine piping, hangers,flanges, gaskets, bolts, insulation, other materials and labor to install. Fuel System All fuel piping and materials not limited to; supply, return,venting, valves,coolers,filters, pumps, fittings, primary fuel regulator,storage tank&senders, external to genset package.All fuel for testing and initial fill. Fuel tank vent extensions and flame arrestors unless specifically listed in the Bill of Materials. Cooling System Intake louvers, exhaust louvers,air dampers, sheet metal ducting, flex adapters, sound attenuators/baffles.All off engine piping,flexible connections, labor and coolant for remote cooling systems. Electrical All off-engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Mounting Mounting bolts and anchors. Vibration isolators (if included) may be shipped loose for installation at the jobsite by others. Seismic engineering calculations. Electrical Testing Not limited to International Electrical Testing Association (NETA), infrared scanning, harmonic content or other independent agency testing of switchgear, switchboards, protective relays, circuit breaker, electrical coordination studies, arc flash studies and reactive load site testing. Environmental Testing Environmental Protection Agency (EPA), local air quality district or other Authority Having Jurisdiction (AHJ), including acoustical. Programming All protective relay settings, breaker settings, PLC programming or other user configurable device programming. Documentation Electronic submittals and operation and maintenance manuals will be provided. Printed copies are available upon request, additional charges may apply. Miscellaneous Site specific labeling. Exhaust backpressure, airflow restriction or vibration analysis Design Cummins is not responsible for system design or engineering and does not guarantee system performance standards. Cummins will supply documentation and reasonable assistance to others responsible for system engineering, design and performance. Taxes and Permit Any applicable sales tax, permits, fees, licenses. Bonds Any bid bond, payment or performance bond or other type of bond. All items listed above are excluded and will only be supplied by Cummins if agreed upon, in writing, by a sales representative for Cummins. LEAD TIME: Submittal Typical submittal lead time is 3-4 weeks after receipt of purchase order. Equipment Current lead-time for the generator is 36-40 weeks after submittal approval and release for production. Please feel free to contact me if you require any additional information; or if you have any further questions or concerns that I may be of assistance with. Thank you for choosing Cummins. Submitted by: Zach Schulte, Senior Sales Account Manager—Power Generation zach.t.sch ulteacum m i ns.com (206)794-9801 Quotation: Q-231582-20240315-1257 Page 3 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W� Service Quotation: Q-231582-20240315-1257 SUBMITTALS. An order for the equipment covered by this quotation will be accepted on a hold for release basis. Your order will not be released and scheduled for production until written approval to proceed is received in our office. Such submittal approval shall constitute acceptance of the terms and conditions of this quotation unless the parties otherwise agree in writing. THERE ARE ADDITIONAL CONTRACT TERMS AND CONDITIONS ATTACHED TO THIS QUOTATION, INCLUDING LIMITATIONS OF WARRANTIES AND LIABILITIES,WHICH ARE EXPRESSLY INCORPORATED HEREIN. BY ACCEPTING THIS QUOTATION, CUSTOMER ACKNOWLEDGES THAT THE CONTRACT TERMS AND CONDITIONS HAVE BEEN READ, FULLY UNDERSTOOD AND ACCEPTED. Quotation: Q-231582-20240315-1257 Page 4 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231593-20240315-1325 PS 12 March 15,2024 Prepared by Zach Schulte (206) 794-9801 zach.t.schulte@cummins.com We are pleased to provide you this quotation based on your inquiry. Item Description Qty 1 C50D6C, Diesel Genset,60Hz, 50kW 1 U.S. EPA,Stationary Emergency Application C50D6C, Diesel Genset, 60Hz, 50kW Duty Rating -Standby Power(ESP) Emission Certification, EPA,Tier 3, NSPS CI Stationary Emergency Listing- UL 2200 NFPA 110 Type 10 Level 1 Capable IBC Seismic Certification Exciter/Regulator- Permanent Magnet Generator, 3 Phase Sensor Voltage-277/480, 3 Phase,Wye, 4 Wire Alternator-60Hz, Reconnect, Full Output, 120C, 40C Ambient, Increased Motor Starting (I MS) Aluminum Sound Attenuated Level 2 Enclosure, with Exhaust System Enclosure Color-Green, Aluminum Enclosure-Wind Load 180 MPH,ASCE7-10 Skidbase- Housing Ready Fuel Tank- Regional, Dual Wall, Sub Base, 24 Hour Minimum High Fuel Level Alarm Panel Fuel Water Separator High Fuel Level Switch, 90% Low Fuel Level Switch, 40% Mechanical Fuel Gauge Fuel Tank Vent Extension Kit, 12ft External Vents, 1 Normal, 2 Emergency Valve- Fuel Tank, Over Fill Protection Valve, 95% Switch- Fuel Tank, Rupture Basin Control Mounting - Left Facing PowerCommand 2.3 Controller Gauge-Oil Pressure Stop Switch-Emergency Relays-Auxiliary, Qty 2, 25A- 15V DC/10A-30V DC Signals-Auxiliary, 8 Inputs/8 Outputs Control Display Language- English Load Connection -Single Circuit Breaker, Location A, 70A-250A, 3P, LSI, 600 Volts AC, 100%, UL Circuit Breaker or Terminal Box (Position B)-None Circuit Breaker or Terminal Box (Position C)-None Engine Governor- Electronic, lsochronous Engine Starter- 12 Volt DC Motor Engine Air Cleaner- Normal Duty Battery Charging Alternator Battery Charger-6 Amp, Regulated Engine Cooling- Radiator, High Ambient Air Temperature, Ship Fitted Shutdown - Low Coolant Level Extension-Coolant Drain Engine Coolant-50%Antifreeze, 50%Water Mixture Coolant Heater Engine Oil Genset Warranty-2 Years Base Literature- English Packing -Skid, Poly Bag Larger Battery Rack Quotation: Q-231593-20240315-1325 Page 1 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231593-20240315-1325 Extension-Oil Drain Green Sound Level 2 Intake Baffle-Ship Loose Ship Loose-Vent Kit A 2 OTECSEA,OTEC Service Entrance Transfer Switch-Electronic Control: 125A 1 OTECSE125, Service Entrance TransferSwitch, PowerCommand, 125 Amp Listing - UL 1008 IBC Seismic Certification Application- Utility to Genset Cabinet-Type 3R Poles-3 (Solid Neutral) Frequency-60 Hz System-3 Phase, 3 or 4 Wire Voltage-480 Volts AC Genset Starting Battery- 12V DC PC40 Control Aux Relay- Emergency Position- 12 Volts DC Aux Relay- Normal Position - 12 Volts DC Interface-Communications Network, MODBUS RTU Module Relay- Elevator Signal Transfer Switch Warranty-2 Year Comprehensive 3 Sound Level2 Baffle, Shipped Loose 1 4 Fuel Tank, Extension Kit-1 Normal,2 Emergency, 12ft 1 5 Annunciator-panel mount with enclosure(RS485) 1 6 Factory direct deliver to site,off-loading by others. No additional storage, handling or re-routing included. 1 7 Generator battery, Group 34 1 8 Start up and 2 hour load test. Customer training to take place after load test is completed. One tech, one 1 day on site. TOTAL: $ 54,769.00 Quote value does not include any tax. EXCEPTIONS AND CLARIFICATIONS: Electrical drawing E-231 reviewed for this proposal. No specifications provided or reviewed. COVID 19 SUPPLEMENTAL STATEMENT AS A RESULT OF THE OUTBREAK OF THE DISEASE COVID-19 ARISING FROM THE NOVEL CORONAVIRUS,TEMPORARY DELAYS IN DELIVERY, LABOUR OR SERVICES FROM CUMMINS AND ITS SUB-SUPPLIERS OR SUBCONTRACTORS MAY OCCUR. AMONG OTHER FACTORS, CUMMINS' DELIVERY OBLIGATIONS ARE SUBJECT TO CORRECT AND PUNCTUAL SUPPLY FROM OUR SUB-SUPPLIERS OR SUBCONTRACTORS,AND CUMMINS RESERVES THE RIGHT TO MAKE PARTIAL DELIVERIES OR MODIFY ITS LABOUR OR SERVICE.WHILE CUMMINS SHALL MAKE EVERY COMMERCIALLY REASONABLE EFFORT TO MEET THE DELIVERY, SERVICE OR COMPLETION OBLIGATIONS SET FORTH HEREIN, SUCH DATES ARE SUBJECT TO CHANGE. INTERNATIONAL BUILDING CODE(IBC)CERTIFICATION The products in this quotation identified as meeting the requirements of the 2009 IBC have been certified by their respective manufactures via a combination of analytical testing and shaker table testing. Not all products have been shaker table tested. OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT(OSHPD) OSHPD seismic requirements are continuing to evolve. Please contact Cummins for the most current requirements for meeting OSHPD applications. SELECTIVE COORDINATION FOR NATIONAL ELECTRIC CODE(NEC)ARTICLE 700 AND 701 LOADS Cummins generators are equipped with the manufacturer's recommended circuit breaker. Information regarding this device can be supplied upon request.This quotation is not valid if any changes to this circuit breaker(s) is required to coordinate with other devices in the electrical distribution system. If changes are required, the customer must provide a copy of the coordination study listing the manufacturers part number of the disconnect device to be supplied with the generator and a revised quotation will be issued. TRANSFER SWITCH WITHSTAND AND CLOSE RATINGS Quotation: Q-231593-20240315-1325 Page 2 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power Sales and Implementation W. Service Quotation: Q-231593-20240315-1325 Transfer switch(es), if included in this quotation, require a withstand and closing rating (WCR) capable of meeting the available upstream fault current(kAIC).The WCR may be based on a specific breaker rating or a time-based rating, and it is the responsibility of a qualified facility designer or engineer to verify compatibility. In the event that the proposed transfer switch(es)are not compatible, the transfer switch(es)will need to be re-quoted to ensure compatibility.A full listing of the WCR can be provided upon request and will be included as part of the submittal package. CUMMINS STANDARD EXCLUSIONS Exhaust System All off-engine piping, hangers,flanges, gaskets, bolts, insulation, other materials and labor to install. Fuel System All fuel piping and materials not limited to; supply, return,venting, valves,coolers,filters, pumps, fittings, primary fuel regulator,storage tank&senders, external to genset package.All fuel for testing and initial fill. Fuel tank vent extensions and flame arrestors unless specifically listed in the Bill of Materials. Cooling System Intake louvers, exhaust louvers,air dampers, sheet metal ducting, flex adapters, sound attenuators/baffles.All off engine piping,flexible connections, labor and coolant for remote cooling systems. Electrical All off-engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Mounting Mounting bolts and anchors. Vibration isolators (if included) may be shipped loose for installation at the jobsite by others. Seismic engineering calculations. Electrical Testing Not limited to International Electrical Testing Association (NETA), infrared scanning, harmonic content or other independent agency testing of switchgear, switchboards, protective relays, circuit breaker, electrical coordination studies, arc flash studies and reactive load site testing. Environmental Testing Environmental Protection Agency (EPA), local air quality district or other Authority Having Jurisdiction (AHJ), including acoustical. Programming All protective relay settings, breaker settings, PLC programming or other user configurable device programming. Documentation Electronic submittals and operation and maintenance manuals will be provided. Printed copies are available upon request, additional charges may apply. Miscellaneous Site specific labeling. Exhaust backpressure, airflow restriction or vibration analysis Design Cummins is not responsible for system design or engineering and does not guarantee system performance standards. Cummins will supply documentation and reasonable assistance to others responsible for system engineering, design and performance. Taxes and Permit Any applicable sales tax, permits, fees, licenses. Bonds Any bid bond, payment or performance bond or other type of bond. All items listed above are excluded and will only be supplied by Cummins if agreed upon, in writing, by a sales representative for Cummins. LEAD TIME: Submittal Typical submittal lead time is 3-4 weeks after receipt of purchase order. Equipment Current lead-time for the generator is 36-40 weeks after submittal approval and release for production. Please feel free to contact me if you require any additional information; or if you have any further questions or concerns that I may be of assistance with. Thank you for choosing Cummins. Submitted by: Zach Schulte, Senior Sales Account Manager—Power Generation zach.t.sch ulteacum m i ns.com (206)794-9801 Quotation: Q-231593-20240315-1325 Page 3 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W� Service Quotation: Q-231593-20240315-1325 SUBMITTALS. An order for the equipment covered by this quotation will be accepted on a hold for release basis. Your order will not be released and scheduled for production until written approval to proceed is received in our office. Such submittal approval shall constitute acceptance of the terms and conditions of this quotation unless the parties otherwise agree in writing. THERE ARE ADDITIONAL CONTRACT TERMS AND CONDITIONS ATTACHED TO THIS QUOTATION, INCLUDING LIMITATIONS OF WARRANTIES AND LIABILITIES,WHICH ARE EXPRESSLY INCORPORATED HEREIN. BY ACCEPTING THIS QUOTATION, CUSTOMER ACKNOWLEDGES THAT THE CONTRACT TERMS AND CONDITIONS HAVE BEEN READ, FULLY UNDERSTOOD AND ACCEPTED. Quotation: Q-231593-20240315-1325 Page 4 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231587-20240315-1316 Wells 15 and 17 March 15,2024 Prepared by Zach Schulte (206) 794-9801 zach.t.schulte@cummins.com We are pleased to provide you this quotation based on your inquiry. Item Description Qty 1 C125D6D, Diesel Genset,60Hz, 125kW 1 U.S. EPA,Stationary Emergency Application C125D6D, Diesel Genset, 60Hz, 125kW Duty Rating -Standby Power(ESP) Emission Certification, EPA,Tier 3, NSPS CI Stationary Emergency Listing- UL 2200 NFPA 110 Type 10 Level 1 Capable IBC Seismic Certification Exciter/Regulator- Permanent Magnet Generator, 3 Phase Sensor Voltage-277/480, 3 Phase,Wye, 4 Wire Alternator-60Hz, 12L, 480/277V, 105C, 40C Ambient, Increased Motor Starting (I MS) Aluminum Sound Attenuated Level 2 Enclosure, with Exhaust System Enclosure Color-Green, Aluminum Enclosure-Wind Load 180 MPH,ASCE7-10 Skidbase- Housing Ready Fuel Tank- Regional, Dual Wall, Sub Base, 24 Hour Minimum High Fuel Level Alarm Panel Fuel Water Separator High Fuel Level Switch, 90% Low Fuel Level Switch, 40% Mechanical Fuel Gauge 5 Gallon Lockable Spill Containment Fuel Fill Box Fuel Tank Vent Extension Kit, 12ft External Vents, 1 Normal, 2 Emergency Valve- Fuel Tank, Over Fill Protection Valve, 95% Switch - Fuel Tank, Rupture Basin Control Mounting - Left Facing PowerCommand 2.3 Controller Gauge-Oil Pressure Stop Switch-Emergency Relays-Auxiliary, Qty 2, 25A- 15V DC/10A-30V DC Signals-Auxiliary, 8 Inputs/8 Outputs Control Display Language-English Load Connection -Single Circuit Breaker, Location A, 125A-400A, 3P, LSI, 600 Volts AC,80%, UL Bottom Entry, Right Engine Governor- Electronic, lsochronous Engine Starter- 12 Volt DC Motor Engine Air Cleaner- Normal Duty Battery Charging Alternator Battery Charger-6 Amp, Regulated Shutdown - Low Coolant Level Extension -Coolant Drain Engine Cooling- Radiator, High Ambient Air Temperature, Ship Fitted Engine Coolant-50%Antifreeze, 50%Water Mixture Coolant Heater Engine Oil Genset Warranty-2 Years Base Literature- English Packing -Skid, Poly Bag Battery Rack Quotation: Q-231587-20240315-1316 Page 1 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231587-20240315-1316 Extension-Oil Drain Green Sound Level 2 Intake Baffle-Ship Loose Ship Loose-Vent Kit A 2 OTECSEB,OTEC Service Entrance Transfer Switch-Electronic Control: 225A 1 OTECSE225, Service Entrance TransferSwitch, PowerCommand, 225 Amp Listing - UL 1008 IBC Seismic Certification Application- Utility to Genset Cabinet-Type 3R Poles-4 (Switched Neutral) Frequency-60 Hz System-3 Phase, 3 or 4 Wire Voltage-480 Volts AC Genset Starting Battery- 12V DC PC40 Control Aux Relay- Emergency Position- 12 Volts DC Aux Relay- Normal Position - 12 Volts DC Interface-Communications Network, MODBUS RTU Module Relay- Elevator Signal Transfer Switch Warranty-2 Year Comprehensive 3 KIT, ENCLOSURE(SL2 Duct) 1 4 Kit, FUEL SYSTEM 1 5 Annunciator-panel mount with enclosure(RS485) 1 6 Factory direct deliver to site,off-loading by others. No additional storage, handling or re-routing included. 1 7 Generator batteries, Group 34 2 8 Start up and 2 hour load test. Customer training to take place after load test is completed. One tech, one 1 day on site. TOTAL: $ 79,868.00 Quote value does not include any tax. EXCEPTIONS AND CLARIFICATIONS: Electrical drawing E-241 reviewed for this proposal. No specifications provided or reviewed. COVID 19 SUPPLEMENTAL STATEMENT AS A RESULT OF THE OUTBREAK OF THE DISEASE COVID-19 ARISING FROM THE NOVEL CORONAVIRUS,TEMPORARY DELAYS IN DELIVERY, LABOUR OR SERVICES FROM CUMMINS AND ITS SUB-SUPPLIERS OR SUBCONTRACTORS MAY OCCUR. AMONG OTHER FACTORS, CUMMINS' DELIVERY OBLIGATIONS ARE SUBJECT TO CORRECT AND PUNCTUAL SUPPLY FROM OUR SUB-SUPPLIERS OR SUBCONTRACTORS,AND CUMMINS RESERVES THE RIGHT TO MAKE PARTIAL DELIVERIES OR MODIFY ITS LABOUR OR SERVICE.WHILE CUMMINS SHALL MAKE EVERY COMMERCIALLY REASONABLE EFFORT TO MEET THE DELIVERY, SERVICE OR COMPLETION OBLIGATIONS SET FORTH HEREIN, SUCH DATES ARE SUBJECT TO CHANGE. INTERNATIONAL BUILDING CODE(IBC)CERTIFICATION The products in this quotation identified as meeting the requirements of the 2009 IBC have been certified by their respective manufactures via a combination of analytical testing and shaker table testing. Not all products have been shaker table tested. OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT(OSHPD) OSHPD seismic requirements are continuing to evolve. Please contact Cummins for the most current requirements for meeting OSHPD applications. SELECTIVE COORDINATION FOR NATIONAL ELECTRIC CODE(NEC)ARTICLE 700 AND 701 LOADS Cummins generators are equipped with the manufacturer's recommended circuit breaker. Information regarding this device can be supplied upon request.This quotation is not valid if any changes to this circuit breaker(s) is required to coordinate with other devices in the electrical distribution system. If changes are required, the customer must provide a copy of the coordination study listing the manufacturers part number of the disconnect device to be supplied with the generator and a revised quotation will be issued. TRANSFER SWITCH WITHSTAND AND CLOSE RATINGS Quotation: Q-231587-20240315-1316 Page 2 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power Sales and Implementation W. Service Quotation: Q-231587-20240315-1316 Transfer switch(es), if included in this quotation, require a withstand and closing rating (WCR) capable of meeting the available upstream fault current(kAIC).The WCR may be based on a specific breaker rating or a time-based rating, and it is the responsibility of a qualified facility designer or engineer to verify compatibility. In the event that the proposed transfer switch(es)are not compatible, the transfer switch(es)will need to be re-quoted to ensure compatibility.A full listing of the WCR can be provided upon request and will be included as part of the submittal package. CUMMINS STANDARD EXCLUSIONS Exhaust System All off-engine piping, hangers,flanges, gaskets, bolts, insulation, other materials and labor to install. Fuel System All fuel piping and materials not limited to; supply, return,venting, valves,coolers,filters, pumps, fittings, primary fuel regulator,storage tank&senders, external to genset package.All fuel for testing and initial fill. Fuel tank vent extensions and flame arrestors unless specifically listed in the Bill of Materials. Cooling System Intake louvers, exhaust louvers,air dampers, sheet metal ducting, flex adapters, sound attenuators/baffles.All off engine piping,flexible connections, labor and coolant for remote cooling systems. Electrical All off-engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Mounting Mounting bolts and anchors. Vibration isolators (if included) may be shipped loose for installation at the jobsite by others. Seismic engineering calculations. Electrical Testing Not limited to International Electrical Testing Association (NETA), infrared scanning, harmonic content or other independent agency testing of switchgear, switchboards, protective relays, circuit breaker, electrical coordination studies, arc flash studies and reactive load site testing. Environmental Testing Environmental Protection Agency (EPA), local air quality district or other Authority Having Jurisdiction (AHJ), including acoustical. Programming All protective relay settings, breaker settings, PLC programming or other user configurable device programming. Documentation Electronic submittals and operation and maintenance manuals will be provided. Printed copies are available upon request, additional charges may apply. Miscellaneous Site specific labeling. Exhaust backpressure, airflow restriction or vibration analysis Design Cummins is not responsible for system design or engineering and does not guarantee system performance standards. Cummins will supply documentation and reasonable assistance to others responsible for system engineering, design and performance. Taxes and Permit Any applicable sales tax, permits, fees, licenses. Bonds Any bid bond, payment or performance bond or other type of bond. All items listed above are excluded and will only be supplied by Cummins if agreed upon, in writing, by a sales representative for Cummins. LEAD TIME: Submittal Typical submittal lead time is 3-4 weeks after receipt of purchase order. Equipment Current lead-time for the generator is 36-40 weeks after submittal approval and release for production. Please feel free to contact me if you require any additional information; or if you have any further questions or concerns that I may be of assistance with. Thank you for choosing Cummins. Submitted by: Zach Schulte, Senior Sales Account Manager—Power Generation zach.t.sch ulteacum m i ns.com (206)794-9801 Quotation: Q-231587-20240315-1316 Page 3 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W� Service Quotation: Q-231587-20240315-1316 SUBMITTALS. An order for the equipment covered by this quotation will be accepted on a hold for release basis. Your order will not be released and scheduled for production until written approval to proceed is received in our office. Such submittal approval shall constitute acceptance of the terms and conditions of this quotation unless the parties otherwise agree in writing. THERE ARE ADDITIONAL CONTRACT TERMS AND CONDITIONS ATTACHED TO THIS QUOTATION, INCLUDING LIMITATIONS OF WARRANTIES AND LIABILITIES,WHICH ARE EXPRESSLY INCORPORATED HEREIN. BY ACCEPTING THIS QUOTATION, CUSTOMER ACKNOWLEDGES THAT THE CONTRACT TERMS AND CONDITIONS HAVE BEEN READ, FULLY UNDERSTOOD AND ACCEPTED. Quotation: Q-231587-20240315-1316 Page 4 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231488-20240315-1014 PS 17 and Well 22 March 15,2024 Prepared by Zach Schulte (206) 794-9801 zach.t.schulte@cummins.com We are pleased to provide you this quotation based on your inquiry. Item Description Qty 1 C150D6D, Diesel Genset,60Hz, 150kW 1 U.S. EPA,Stationary Emergency Application C150D6D, Diesel Genset, 60Hz, 150kW Duty Rating -Standby Power(ESP) Emission Certification, EPA,Tier 3, NSPS CI Stationary Emergency Listing- UL 2200 NFPA 110 Type 10 Level 1 Capable IBC Seismic Certification Exciter/Regulator- Permanent Magnet Generator, 3 Phase Sensor Voltage-277/480, 3 Phase,Wye, 4 Wire Alternator-60Hz, 12L, 480/277V, 105C, 40C Ambient, Increased Motor Starting (I MS) Aluminum Sound Attenuated Level 2 Enclosure, with Exhaust System Enclosure Color-Green, Aluminum Enclosure-Wind Load 180 MPH,ASCE7-10 Skidbase- Housing Ready Fuel Tank- Regional, Dual Wall, Sub Base, 24 Hour Minimum High Fuel Level Alarm Panel Fuel Water Separator High Fuel Level Switch, 90% Low Fuel Level Switch, 40% Mechanical Fuel Gauge 5 Gallon Lockable Spill Containment Fuel Fill Box Fuel Tank Vent Extension Kit, 12ft External Vents, 1 Normal, 2 Emergency Valve- Fuel Tank, Over Fill Protection Valve, 95% Switch - Fuel Tank, Rupture Basin Control Mounting - Left Facing PowerCommand 2.3 Controller Gauge-Oil Pressure Stop Switch-Emergency Relays-Auxiliary, Qty 2, 25A- 15V DC/10A-30V DC Signals-Auxiliary, 8 Inputs/8 Outputs Control Display Language-English Load Connection -Single Circuit Breaker, Location A, 125A-400A, 3P, LSI, 600 Volts AC,80%, UL Bottom Entry, Right Engine Governor- Electronic, lsochronous Engine Starter- 12 Volt DC Motor Engine Air Cleaner- Normal Duty Battery Charging Alternator Battery Charger-6 Amp, Regulated Engine Cooling- Radiator, High Ambient Air Temperature, Ship Fitted Shutdown - Low Coolant Level Extension-Coolant Drain Engine Coolant-50%Antifreeze, 50%Water Mixture Coolant Heater Engine Oil Genset Warranty-2 Years Base Literature- English Packing -Skid, Poly Bag Battery Rack Quotation: Q-231488-20240315-1014 Page 1 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W. Service Quotation: Q-231488-20240315-1014 Extension-Oil Drain Green Sound Level 2 Intake Baffle-Ship Loose Ship Loose-Vent Kit A 2 OTECSEB,OTEC Service Entrance Transfer Switch-Electronic Control: 225A 1 OTECSE225, Service Entrance TransferSwitch, PowerCommand, 225 Amp Listing - UL 1008 IBC Seismic Certification Application- Utility to Genset Cabinet-Type 1 Poles-4 (Switched Neutral) Frequency-60 Hz System-3 Phase, 3 or 4 Wire Voltage-480 Volts AC Genset Starting Battery- 12V DC PC40 Control Aux Relay- Emergency Position- 12 Volts DC Aux Relay- Normal Position - 12 Volts DC Interface-Communications Network, MODBUS RTU Module Relay- Elevator Signal Transfer Switch Warranty-2 Year Comprehensive 3 KIT, ENCLOSURE(SL2 Duct) 1 4 Kit, FUEL SYSTEM 1 5 Annunciator-panel mount with enclosure(RS485) 1 6 Factory direct deliver to site,off-loading by others. No additional storage, handling or re-routing included. 1 7 Generator batteries, Group 34 2 8 Start up and 2 hour load test. Customer training to take place after load test is completed. One tech, one 1 day on site. TOTAL: $ 74,753.00 Quote value does not include any tax. EXCEPTIONS AND CLARIFICATIONS: Electrical drawing E-251 reviewed for this proposal. No specifications provided or reviewed. COVID 19 SUPPLEMENTAL STATEMENT AS A RESULT OF THE OUTBREAK OF THE DISEASE COVID-19 ARISING FROM THE NOVEL CORONAVIRUS,TEMPORARY DELAYS IN DELIVERY, LABOUR OR SERVICES FROM CUMMINS AND ITS SUB-SUPPLIERS OR SUBCONTRACTORS MAY OCCUR. AMONG OTHER FACTORS, CUMMINS' DELIVERY OBLIGATIONS ARE SUBJECT TO CORRECT AND PUNCTUAL SUPPLY FROM OUR SUB-SUPPLIERS OR SUBCONTRACTORS,AND CUMMINS RESERVES THE RIGHT TO MAKE PARTIAL DELIVERIES OR MODIFY ITS LABOUR OR SERVICE.WHILE CUMMINS SHALL MAKE EVERY COMMERCIALLY REASONABLE EFFORT TO MEET THE DELIVERY, SERVICE OR COMPLETION OBLIGATIONS SET FORTH HEREIN, SUCH DATES ARE SUBJECT TO CHANGE. INTERNATIONAL BUILDING CODE(IBC)CERTIFICATION The products in this quotation identified as meeting the requirements of the 2009 IBC have been certified by their respective manufactures via a combination of analytical testing and shaker table testing. Not all products have been shaker table tested. OFFICE OF STATEWIDE HEALTH PLANNING AND DEVELOPMENT(OSHPD) OSHPD seismic requirements are continuing to evolve. Please contact Cummins for the most current requirements for meeting OSHPD applications. SELECTIVE COORDINATION FOR NATIONAL ELECTRIC CODE(NEC)ARTICLE 700 AND 701 LOADS Cummins generators are equipped with the manufacturer's recommended circuit breaker. Information regarding this device can be supplied upon request.This quotation is not valid if any changes to this circuit breaker(s) is required to coordinate with other devices in the electrical distribution system. If changes are required, the customer must provide a copy of the coordination study listing the manufacturers part number of the disconnect device to be supplied with the generator and a revised quotation will be issued. TRANSFER SWITCH WITHSTAND AND CLOSE RATINGS Quotation: Q-231488-20240315-1014 Page 2 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power Sales and Implementation W. Service Quotation: Q-231488-20240315-1014 Transfer switch(es), if included in this quotation, require a withstand and closing rating (WCR) capable of meeting the available upstream fault current(kAIC).The WCR may be based on a specific breaker rating or a time-based rating, and it is the responsibility of a qualified facility designer or engineer to verify compatibility. In the event that the proposed transfer switch(es)are not compatible, the transfer switch(es)will need to be re-quoted to ensure compatibility.A full listing of the WCR can be provided upon request and will be included as part of the submittal package. CUMMINS STANDARD EXCLUSIONS Exhaust System All off-engine piping, hangers,flanges, gaskets, bolts, insulation, other materials and labor to install. Fuel System All fuel piping and materials not limited to; supply, return,venting, valves,coolers,filters, pumps, fittings, primary fuel regulator,storage tank&senders, external to genset package.All fuel for testing and initial fill. Fuel tank vent extensions and flame arrestors unless specifically listed in the Bill of Materials. Cooling System Intake louvers, exhaust louvers,air dampers, sheet metal ducting, flex adapters, sound attenuators/baffles.All off engine piping,flexible connections, labor and coolant for remote cooling systems. Electrical All off-engine wiring, field terminations of wiring, and lugs other than those detailed in our submittal. Mounting Mounting bolts and anchors. Vibration isolators (if included) may be shipped loose for installation at the jobsite by others. Seismic engineering calculations. Electrical Testing Not limited to International Electrical Testing Association (NETA), infrared scanning, harmonic content or other independent agency testing of switchgear, switchboards, protective relays, circuit breaker, electrical coordination studies, arc flash studies and reactive load site testing. Environmental Testing Environmental Protection Agency (EPA), local air quality district or other Authority Having Jurisdiction (AHJ), including acoustical. Programming All protective relay settings, breaker settings, PLC programming or other user configurable device programming. Documentation Electronic submittals and operation and maintenance manuals will be provided. Printed copies are available upon request, additional charges may apply. Miscellaneous Site specific labeling. Exhaust backpressure, airflow restriction or vibration analysis Design Cummins is not responsible for system design or engineering and does not guarantee system performance standards. Cummins will supply documentation and reasonable assistance to others responsible for system engineering, design and performance. Taxes and Permit Any applicable sales tax, permits, fees, licenses. Bonds Any bid bond, payment or performance bond or other type of bond. All items listed above are excluded and will only be supplied by Cummins if agreed upon, in writing, by a sales representative for Cummins. LEAD TIME: Submittal Typical submittal lead time is 3-4 weeks after receipt of purchase order. Equipment Current lead-time for the generator is 36-40 weeks after submittal approval and release for production. Please feel free to contact me if you require any additional information; or if you have any further questions or concerns that I may be of assistance with. Thank you for choosing Cummins. Submitted by: Zach Schulte, Senior Sales Account Manager—Power Generation zach.t.sch ulteacum m i ns.com (206)794-9801 Quotation: Q-231488-20240315-1014 Page 3 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Project: City of Bremerton Emergency Power �° Sales and Implementation W� Service Quotation: Q-231488-20240315-1014 SUBMITTALS. An order for the equipment covered by this quotation will be accepted on a hold for release basis. Your order will not be released and scheduled for production until written approval to proceed is received in our office. Such submittal approval shall constitute acceptance of the terms and conditions of this quotation unless the parties otherwise agree in writing. THERE ARE ADDITIONAL CONTRACT TERMS AND CONDITIONS ATTACHED TO THIS QUOTATION, INCLUDING LIMITATIONS OF WARRANTIES AND LIABILITIES,WHICH ARE EXPRESSLY INCORPORATED HEREIN. BY ACCEPTING THIS QUOTATION, CUSTOMER ACKNOWLEDGES THAT THE CONTRACT TERMS AND CONDITIONS HAVE BEEN READ, FULLY UNDERSTOOD AND ACCEPTED. Quotation: Q-231488-20240315-1014 Page 4 of 10 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 EXHIBIT B EMERGENCY POWER PLAN IMPLEMENTATION SOLE SOURCE DOCUMENTATION FOR PROVISION OF EQUIPMENT AND SERVICES FROM CUMMINS, INC. March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 TO: THOMAS KNUCKEY, PUBLIC WORKS AND UTILITIES DIRECTOR Digitally signed by Can FROM: CAMI APFELBECK, WATER UTILITY MANAGER qp elbeck -07b00220$03,1132' ERIC BURRIS, WASTEWATER TREATMENT PLANT MANAGER Eric J. Digitallysigned Burris J.Burns Burris Date1 2002O08 3 CITY op DATE: AUGUST 2, 2022 BREMERTON RE: Standardization of Generators and Generator Service for Water and Wastewater Systems BMC 2.76.090 allows for the Public Works and Utilities Director to determine that requests for bids may be waived when equipment involves special facilities or services, and a bid would not be in the City's best interests but rather a purchase may be best established by direct negotiation. A power outage caused by extreme weather such as wind and ice and other circumstances is the most common emergency faced by the Bremerton drinking water and wastewater treatment systems. It is critical that these systems continue to provide service, particularly in emergencies. Highly dependable backup power supplies are critical. The Water Utility developed an emergency power plan to identify critical facilities in need of on-site backup power to ensure a reliable supply of water during emergencies. In the 1990's, the utility purchased generators from multiple manufacturers, first Generac, then Kohler. However, since 2000, the utility switched to Cummins (Onan) generators, due to their superior performance and dependability. The utility has eight (8) backup generators installed so far and intends to install approximately eight (8) more to complete emergency power plan implementation by 2024. The Wastewater Utility currently has 23 stationary emergency generators and three portable units. The newer units are Cummins, with the remainder being a mix of Kohler, Cummins, Caterpillar, Olympian, etc. The wastewater utility plans to install another six (6) generators over the next six years. Reason for standardizing to Cummins generators: Generator manufacturers use proprietary software to interface with generator controls in order to troubleshoot, repair and perform maintenance. If the Water Utility and WWTP must utilize the bid process and accept lowest bid, this may result in multiple brands of generators requiring multiple service contracts to conduct annual testing and maintenance and on-call troubleshooting. This would result in disparate testing and maintenance schedules, higher costs and less than ideal dependability and customer service, particularly if needed during an emergency. Reason for standardizing to Cummins generator services: Cummins is the only provider of testing, maintenance, and on-call troubleshooting services that is able to service all of the Water and Wastewater Utility's generators, including the Generac and Kohler. As such, the City has a long history of working with Cummins who has proven itself to be highly dependable and a superior customer service entity. Further, standardization on Cummins generator services results in reduced costs as we are purchasing "in bulk" and all annual maintenance is accomplished at the same time, causing less disruption of work and redirection of staff resources. For the reasons above we recommend standardization of both Cummins generators and Cummins generator services for Bremerton's drinking water and wastewater utilities. Approved: Tom Knuckey Digitally signed by Tom Knuckey pp Date:2022.08.0313:48:06.OTOO' Thomas Knuckey, Public Works and Utilities Director DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Public Works and Utilities Department 100 Oyster Bay Ave. N. • Bremerton, WA 98312 • (360)473-5920 • FAX(360) 473-5360 • J DATE: August 3, 2022 TO: Procurement File FROM: Cami Apfelbeck, Water Utility Manager Eric Burris, Wastewater Utility Manager SUBJECT: Sole Source Determination In accordance with Bremerton Municipal Code 2.76.090, Sole Source Purchases, the purpose of this memorandum is to document the necessity of sole source procurement methodology for the purchase of Cummins generators and generator services. Reasoning (check all supporting options below): ❑X Compatibility to existing City standard or to existing equipment, inventory, systems, data, programs or service. (Attach the business case for the standard and attach a copy of the standard if it is written). ❑ Licensed or patented product with only one dealer. (Include a statement explaining why this particular licensed or patented product the only one suitable for your purpose) ❑ Authorized service provider, repair and/or warranty services. The City requires service or repair support for products or equipment owned by the City, and the vendor is either a factory authorized warranty service provider or that particular vendor is required for warranty services according to the conditions of a current City contract. ❑ Unique design: Requires unique features that are essential aesthetic requirements, or not practical to match to existing design or equipment, such as artwork. Describe. ❑ Special bargain: This might include a surplus item, an auction sale, used equipment, returned "open box" purchase, or other similar one-time bargains. Describe. ❑ Delivery date: Only one supplier can meet required delivery date. Explain why this delivery date is essential. This can only be used in limited circumstances, for delivery deadlines that are the result of an unanticipated situation, and not a circumstance that could have been reasonably anticipated or averted by advance City planning. ❑ Project or research continuity: Product, systems, services or data must comply with an ongoing project, research, data, testing or analysis without a compromise in the integrity of the project. Also, this should be a situation that cannot be replicated by another company because there is a • Page 1 VENDOR NAME August 3, 2022 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 Public Works and Utilities Department 100 Oyster Bay Ave. N. • Bremerton, WA 98312 • (360)473-5920 • FAX(360) 473-5360 • J legal or physical obstruction to disclosing the project information to allow another company the opportunity to replicate. Examples include situations where a company has legal and/or proprietary rights to customization such as software code, or to data; or testing or data is collected through a unique measuring instrument that cannot be accurately duplicated and offered by another vendor. ❑ Requirement by funding source: Lender, grantor (such as federal government) or other provider of funds requires the specific product, service or system. Attach a copy of the document that clearly shows such a requirement is imposed by the funding source. ❑ Legal monopoly: Only one supplier, such as electricity, water, or sewage. ❑ Trial and evaluation projects: A limited duration, limited scope pilot, trial or evaluation of a product, range of products or services. A trial or evaluation project would typically be part of establishing a standard for a City department, or to pilot a particular product or services for a City need. Describe the pilot, specify the scope of the pilot, and attach information to confirm that the pilot is part of a purposeful department pilot initiative. ❑ Other. Describe. Why is this the only company that can provide the sole source product or service? The reference section reference section explains why a particular product, manufacturer or service is necessary. The section below discusses why the company you request is the only available company. Cost/Quote support: See attached quotes and service agreements. Our staff believes this is a fair and reasonable price. Therefore, it is my determination that it is in the City's best interests to purchase Cummins generators and generator services through direct negotiation, pursuant to BMC 2.76.090 and 2.76.010, and that sole source purchase of these Cummins generators and generator services is justified for this procurement. Recommended by: Digitally signed by Eric J.Burris Digitally signed by CamiApfelbeck Eric J. Burris Date:2022.08.0312:11:49 Cami Apfelbeck Date:2o2208�,,.35.35_0,,00, -07'00' Cami Apfelbeck, Water Utility Manager Eric Burris, WWTP Manager Approved by: Tom Knuckey Digitally signed by Tom Knuckey Date:2022.08.03 13:45:52-07'00' Thomas Knuckey, Public Works and Utilities Director • Page 2 VENDOR NAME August 3, 2022 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 EXHIBIT C EMERGENCY POWER PLAN IMPLEMENTATION WARRANTY DOCUMENTATION March 2024 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 `rA Warranty Statement Global Commercial Warranty Statement Generator Set English Original Instructions 7-2017 A028U870 (Issue 5) DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 <<%0 Power Cf Generation Our energy working for you:" Limited Warranty Environmental Protection Agency — Stationary Emergency (EPA-SE) is defined as being the maximum power available during a variable electrical Commercial Generating Set power sequence, under the stated operating This limited warranty applies to all Cummins Power conditions, for which a generator set is capable of Generation® branded commercial generating sets delivering in the event of a utility power outage or and associated accessories (hereinafter referred to under test conditions and used in strict accordance as"Product"). with the EPA NSPS for stationary engines, 40 CFR part 60, subparts 1111 and JJJJ, where a reliable utility This warranty covers any failures of the Product, must be present. The permissible average power under normal use and service, which result from a output over 24 hours of operation shall not exceed defect in material or factory workmanship. 70%of the EPA-SE. Warranty Period: Data Center Continuous(DCC) is defined as the The warranty start date' is the date of initial start up, maximum power which the generator is capable of first rental, demonstration or 18 months after factory delivering continuously to a constant or varying ship date, whichever is sooner. See table for details. electrical load for unlimited hours in a data center application. Continuous Power (COP) is defined as being the maximum power which the generating set is capable Base Warranty Coverage Duration of delivering continuously whilst supplying a constant (Whichever occurs first) electrical load when operated for an unlimited Rating Months Max. Hours number of hours per year. No overload capability is COP 12 Unlimited available for this rating. PRP 12 Unlimited Prime Power (PRP) is defined as being the LTP 12 500 hrs maximum power which a generating set is capable of ESP 24 1000 hrs delivering continuously whilst supplying a variable ��. EPA-SE 24 Unlimited electrical load when operated for an unlimited DCC 24 Unlimited number of hours per year. The permissible average power output over 24 hours of operation shall not t Warranty start date for designated rental and oil and gas model exceed 70% of the PRP. For applications requiring Products is determined to be date of receipt of Product by the end permissible average output higher than stated, a customer. COP rating should be used. Cummins Power Generation® Limited-Time Running Power (LTP) is defined as Responsibilities: the maximum power available, under the agreed In the event of a failure of the Product during the operating conditions, for which the generating set is warranty period due to defects in material or capable of delivering for up to 500 hours of operation workmanship, Cummins Power Generation®will only per year. be responsible for the following costs: Emergency Standby Power (ESP) is defined as the • All parts and labor required to repair the maximum power available during a variable electrical Product. power sequence, under the stated operating • Reasonable travel expenses to and from the conditions, for which a generating set is capable of Product site location. delivering in the event of a utility power outage or • Maintenance items that are contaminated or under test conditions for up to 500 hours of operation damaged by a warrantable failure. per year. The permissible average power output over 24 hours of operation shall not exceed 70% of the Owner Responsibilities: ESP. The owner will be responsible for the following: Effective Date: 18-July-2017 Page 1 of 2 A028U870 Issue 5 DocuSign Envelope ID:26563432-FDA6-4D6E-848A-8E72A20AA063 • Notifying Cummins Power Generation® • Damage to parts, fixtures, housings, distributor or dealer within 30 days of the attachments and accessory items that are discovery of failure. not part of the generating set. • Installing, operating, commissioning and maintaining the Product in accordance with This limited warranty does not cover costs resulting Cummins Power Generation®'s published from: policies and guidelines. • Difficulty in gaining access to the Product. • Providing evidence for date of • Damage to customer property. commissioning. • Providing sufficient access to and reasonable A "Data center" is defined as a dedicated facility that ability to remove the Product from the house computers and associated equipment for data installation in the event of a warrantable storage and data handling. failure. • Incremental costs and expenses associated Reliable utility is defined as utility power without with Product removal and reinstallation routine or regularly scheduled black-outs. resulting from non-standard installations. • Costs associated with rental of generating Please contact your local Cummins Power sets used to replace the Product being Generation® Distributor for clarification concerning repaired. these limitations. • Costs associated with labor overtime and premium shipping requested by the owner. CUMMINS POWER GENERATION® RIGHT TO • All downtime expenses, fines, all applicable FAILED COMPONENTS: taxes, and other losses resulting from a warrantable failure. Failed components claimed under warranty remain the property of Cummins Power Generation®. Limitations: Cummins Power Generation®has the right to reclaim This limited warranty does not cover Product failures any failed component that has been replaced under resulting from: warranty. • Inappropriate use relative to designated power rating. Extended Warranty: • Inappropriate use relative to application Cummins Power Generation® offers several levels of guidelines. Extended Warranty Coverage. Please contact your • Inappropriate use of an EPA-SE application local Cummins Power Generation ® Distributor for generator set relative to EPA's standards. details. • Normal wear and tear. www.power.cummins.com • Improper and/or unauthorized installation. • Negligence, accidents or misuse. THE WARRANTIES SET FORTH HEREIN ARE THE • Lack of maintenance or unauthorized repair. SOLE WARRANTIES MADE BY CUMMINS • Noncompliance with any Cummins Power POWER GENERATION ® IN REGARD TO THE Generation®published guideline or policy. PRODUCT. CUMMINS POWER GENERATION® • Use of improper or contaminated fuels, MAKES NO OTHER WARRANTIES, EXPRESS OR coolants or lubricants. IMPLIED, OR OF MERCHANTABILITY OR • Improper storage before and after FITNESS FOR A PARTICULAR PURPOSE. commissioning. • Owner's delay in making Product available IN NO EVENT IS CUMMINS POWER after notification of potential Product problem. GENERATION® LIABLE FOR INCIDENTAL OR • Replacement parts and accessories not CONSEQUENTIAL DAMAGES. authorized by Cummins Power Generation®. • Use of Battle Short Mode. This limited warranty shall be enforced to the • Owner or operator abuse or neglect such as: maximum extent permitted by applicable law. This operation without adequate coolant or limited warranty gives the owner specific rights that lubricants; overfueling; overspeeding; lack of may vary from state to state or from jurisdiction to maintenance to lubricating, cooling or air jurisdiction. intake systems; late servicing and maintenance; improper storage, starting, warm-up, run-in or shutdown practices, or for Product Model Number: progressive damage resulting from a Product Serial Number: defective shutdown or warning device. Date in Service: Effective Date: 18-July-2017 Page 2 of 2 A028U870 Issue 5 DATE(MMIDDIYYYY) A`ORO° CERTIFICATE OF LIABILITY INSURANCE 7/20/2024 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER,AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED,the policy(ies)must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). PRODUCER CONTACT NAME: A.I.King Insurance Agency, Inc. Aon Risk Services Central Inc. PHONE FAX 200 E Randolph St. E-MAIL Ext): 317-841-6004 (AIC,No): 317-841-6006 Chicago, IL 60601 ADDRESS: cummins@aikinginsurance.com INSURER(S)AFFORDING COVERAGE NAIC# INSURER A: Swiss Re Corporate Solutions Elite Ins 29700 INSURED INSURER B: Old Republic Insurance Company 24147 Cummins Inc. 500 Jackson Street INSURER C: Mail Code 91676 INSURERD: Columbus IN 47201-6258 INSURERE: INSURER F: COVERAGES CERTIFICATE NUMBER: 81060551 REVISION NUMBER: THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSR LTR TYPE OF INSURANCE ADDL INSD SUBR WVD POLICY NUMBER POLICY EFF POLICY EXP LIMITS (MMIDDIYYYY) (MMIDDIYYYY) A �/ COMMERCIAL GENERAL LIABILITY V V CGP0000001-02 8/1/2024 8/1/2025 EACH OCCURRENCE $5,000,000 DAMAGE TO RENTE CLAIMS-MADE ✓ OCCUR PREMISES(Ea occur ence) $5,000,000 MED EXP(Any one person) $10,000 PERSONAL&ADV INJURY $5,000,000 GEN'L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $5,000,000 ✓ POLICY PRO- JECT LOC PRODUCTS-COMP/OP AGG $5,000,000 OTHER: $ B AUTOMOBILE LIABILITY MWTB31701524 8/1/2024 8/1/2025 COMBINEDSINGLELIMIT $ (Ea accident) 2,000,000 ✓ ANY AUTO BODILY INJURY(Per person) $ OWNED SCHEDULED BODILY INJURY(Per accident) $ AUTOS ONLY AUTOS HIRED NON-OWNED PROPERTY DAMAGE AUTOS ONLY AUTOS ONLY (Per accident) PHYSICAL DAMAGE $SELF-INSURED A �/ UMBRELLA LIAB ✓ OCCUR CGU0000001-02 8/1/2024 8/1/2025 EACH OCCURRENCE $20,000,000 EXCESS LIAB CLAIMS-MADE AGGREGATE $20,000,000 DED RETENTION$ $ B WORKERS COMPENSATION MWC 314311-24 8/1/2024 8/1/2025 STATUTE OTH- ER AND EMPLOYERS LIABILITY Y I N ANYPROPRIETOR/PARTNER/EXECUTIVE E.L.EACH ACCIDENT $2,000,000 OFFICER/MEMBER EXCLUDED? N NIA (Mandatory in NH) E.L.DISEASE-EA EMPLOYEE $2,000,000 If yes,describe under DESCRIPTION OF OPERATIONS below E.L.DISEASE-POLICY LIMIT $2,000,000 B Excess Auto Liability MWZX 317016 24 8/1/2024 8/1/2025 Limit 3,000,000 DESCRIPTION OF OPERATIONS I LOCATIONS I VEHICLES (ACORD 101,Additional Remarks Schedule,may be attached if more space is required) City of Bremerton is listed as additional insured with a waiver of subrogation as required by written contract. General Liability,Auto Liability and Umbrella Policies are primary&non-contributory. CERTIFICATE HOLDER CANCELLATION SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE City of Bremerton THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN Attn: Noreen Bolo ACCORDANCE WITH THE POLICY PROVISIONS. 345 6th Street, Suite 100 Bremerton WA 98337 AUTHORIZED REPRESENTATIVE Al King ©1988-2015 ACORD CORPORATION. All rights reserved. ACORD 25(2016/03) The ACORD name and logo are registered marks of ACORD 81060551 24/25 GL AU UMB WC (Custom Merged) Shelly Pence 7/20/2024 11:10:42 PM (EDT) Page 1 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 4 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED - OWNERS, LESSEES OR CONTRACTORS - COMPLETED OPERATIONS This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART PRODUCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) All persons or organizations as required by written contract or agreement Location And Description Of Completed Operations All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II — Who Is An Insured is amended to B.With respect to the insurance afforded to these include as an additional insured the person(s) or additional insureds, the following is added to organization(s) shown in the Schedule, but only Section III —Limits Of Insurance: with respect to liability for "bodily injury" or If coverage provided to the additional insured is "property damage" caused, in whole or in part, by required by a contract or agreement, the most we "your work" at the location designated and will pay on behalf of the additional insured is the described in the Schedule of this endorsement amount of insurance: performed for that additional insured and included 1.Required by the contract or agreement; or in the "products-completed operations hazard". 2.Available under the applicable limits of However: insurance; 1.The insurance afforded to such additional whichever is less. insured only applies to the extent permitted by This endorsement shall not increase the law; and applicable limits of insurance. 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. CG 20 37 12 19 O Insurance Services Office, Inc., 2018 Page 1 of 2 Insured Copy 21060551 124/25 GL AU UM2 WC (Custom Merged) I Shelly Pence 17/20/2024 11;10;42 PM (EDT) I Page 2 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached,effective on the inception date of the policy unless otherwise stated herein. (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: CGP0000001-02 Endorsement Effective Date: 08/01/2024 Named Insured: Cummins Inc. CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 2 of 2 Insured Copy 61060551 124/25 GL AU UME WC (Custom Merged) I Shelly Pence 17/20/2024 11:10:42 PM (EDT) I Page 3 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 3 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED - OWNERS, LESSEES OR CONTRACTORS - SCHEDULED PERSON OR ORGANIZATION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) Location(s) Of Covered Operations All persons or organizations as required by written All locations on file with the Company contract or agreement Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II — Who Is An Insured is amended to B.With respect to the insurance afforded to these include as an additional insured the person(s) or additional insureds, the following additional organization(s) shown in the Schedule, but only with exclusions apply: respect to liability for "bodily injury", "property This insurance does not apply to "bodily injury" or damage" or "personal and advertising injury" "property damage" occurring after: caused, in whole or in part, by: 1.AIl work, including materials, parts or 1.Your acts or omissions; or equipment furnished in connection with such 2.The acts or omissions of those acting on your work, on the project (other than service, behalf; maintenance or repairs) to be performed by or in the performance of your ongoing operations for on behalf of the additional insured(s) at the the additional insured(s) at the location(s) location of the covered operations has been designated above. completed; or However: 2.That portion of "your work" out of which the 1.The insurance afforded to such additional injury or damage arises has been put to its insured only applies to the extent permitted by intended use by any person or organization law; and other than another contractor or subcontractor 2.If coverage provided to the additional insured is engaged in performing operations for a required by a contract or agreement, the principal as a part of the same project. insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. CG 20 10 1219 © Insurance Services Office, Inc., 2018 Page 1 of 2 Insured Copy 01060551 I 24/25 GL AU UIvI2 WC (Custom Merged) I Shelly Pence I 7/20/2024 11;10;42 PM (EDT) I Page 4 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company C. With respect to the insurance afforded to these 2. Available under the applicable limits of additional insureds, the following is added to insurance; Section III—Limits Of Insurance: whichever is less. If coverage provided to the additional insured is This endorsement shall not increase the required by a contract or agreement, the most we applicable limits of insurance. will pay on behalf of the additional insured is the amount of insurance: 1. Required by the contract or agreement; or All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: CGP0000001-02 Endorsement Effective Date: 08/01/2024 Named Insured: Cummins Inc. Page 2 of 2 © Insurance Services Office, Inc., 2018 CG 20 10 12 19 Insured Copy B1060551 124/25 GL AU UME WC (Custom Merged) I Shelly Pence 17/20/2024 11:10:42 PM (EDT) I Page 5 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 08/01/2024 0 8/0 1/2 0 2 5 COMMERCIAL GENERAL LIABILITY CG20011219 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. PRIMARY AND NONCONTRIBUTORY - OTHER INSURANCE CONDITION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART LIQ- UOR LIABILITY COVERAGE PART PRODUCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART The following is added to the Other Insurance Con- (2) You have agreed in writing in a contract or dition and supersedes any provision to the contrary: agreement that this insurance would be pri- Primary And Noncontributory Insurance mary and would not seek contribution from any other insurance available to the addi- This insurance is primary to and will not seek con- tional insured. tribution from any other insurance available to an additional insured under your policy provided that: (1) The additional insured is a Named Insured under such other insurance; and CG 20 01 1219 ©Insurance Services Office, Inc., 2018 Page 1 of 1 81060551 24/25 GL AU UMP WC (Custom Merged) Shelly Pence 7/20/2024 11:10:42 PM (EDT) Page 6 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 0 /01/202 0 8/0 v2o25 COMMERCIAL GENERAL LIABILITY CG 2404 12 19 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. WAIVER OF TRANSFER OF RIGHTS OF RECOVERY AGAINST OTHERS TO US (WAIVER OF SUBROGATION) This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART ELECTRONIC DATA LIABILITY COVERAGE PART LIQ- UOR LIABILITY COVERAGE PART POLLUTION LIABILITY COVERAGE PART DESIGNATED SITES POLLU- TION LIABILITY LIMITED COVERAGE PART DESIGNATED SITES PROD- UCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART RAIL- ROAD PROTECTIVE LIABILITY COVERAGE PART UNDERGROUND STORAGE TANK POLICY DESIGNATED TANKS SCHEDULE Name Of Person(s)Or Organization(s): All persons or organizations as required by written contract or agreement Information required to complete this Schedule, if not shown above,will be shown in the Declarations. The following is added to Paragraph 8. Transfer Of Rights Of Recovery Against Others To Us of Sec- tion IV—Conditions: We waive any right of recovery against the person(s) or organization(s) shown in the Schedule above be- cause of payments we make under this Coverage Part. Such waiver by us applies only to the extent that the insured has waived its right of recovery against such person(s) or organization(s) prior to loss. This endorsement applies only to the person(s) or organi- zation(s)shown in the Schedule above. CG 24 04 12 19 ®Insurance Services Office, Inc.,2018 Page 1 of 1 91060551 124/25 GL AU UME WC (Custom Merged) I Shelly Pence 17/20/2024 11 10 42 PM (EDT) I Page 7 of 7 This certificate cancels and supersedes ALL previously issued certificates. SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 7/9/2024 Aon Risk Services Central Inc. 200 E Randolph St. Chicago, IL 60601 317-841-6004 317-841-6006 Swiss Re Corporate Solutions Elite Ins 29700 Old Republic Insurance Company 24147 Allianz Global Risks US Insurance Co 35300 A 5,000,000CGP0000001-03 8/1/2023 8/1/2024 5,000,000 3 10,000 3 5,000,000 5,000,000 5,000,000 B MWTB 317015 23 8/1/2023 8/1/2024 2,000,000 3 PHYSICAL DAMAGE SELF-INSURED A CGU0000001-03 8/1/2023 8/1/2024 10,000,00033 10,000,000 B MWC 314311-23 8/1/2023 8/1/2024 3 2,000,000N 2,000,000 2,000,000 B Excess Auto Liability MWZX 317016 23 8/1/2023 8/1/2024 Limit 13,000,000 C Excess Liability USL02306023 8/1/2023 8/1/2024 Limit 10,000,000 Occ/Agg Al King A. I. King Insurance Agency, Inc. cummins@aikinginsurance.com 3 Cummins Inc. 500 Jackson Street Mail Code 91676 Columbus IN 47201-6258 80860521 3 3 City of Bremerton is listed as additional insured with a waiver of subrogation as required by written contract. City of Bremerton Attn: Noreen Bolo 345 6th Street, Suite 100 Bremerton WA 98337 General Liability, Auto Liability and Umbrella Policies are primary & non-contributory. 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 1 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED –OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 4 CONTRACTORS –COMPLETED OPERATIONS This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART PRODUCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) All persons or organizations as required by written contract or agreement Location And Description Of Completed Operations All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II –Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury" or "property damage" caused, in whole or in part, by "your work" at the location designated and described in the Schedule of this endorsement performed for that additional insured and included in the "products-completed operations hazard". However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 2 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 2 of 2 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-03 08/01/2023 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 3 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED – OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 3 CONTRACTORS – SCHEDULED PERSON OR ORGANIZATION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) Location(s) Of Covered Operations All persons or organizations as required by written contract or agreement All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II – Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury", "property damage" or "personal and advertising injury" caused, in whole or in part, by: 1.Your acts or omissions; or 2.The acts or omissions of those acting on your behalf; in the performance of your ongoing operations for the additional insured(s) at the location(s) designated above. However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following additional exclusions apply: This insurance does not apply to "bodily injury" or "property damage" occurring after: 1.All work, including materials, parts or equipment furnished in connection with such work, on the project (other than service, maintenance or repairs) to be performed by or on behalf of the additional insured(s) at the location of the covered operations has been completed; or 2.That portion of "your work" out of which the injury or damage arises has been put to its intended use by any person or organization other than another contractor or subcontractor engaged in performing operations for a principal as a part of the same project. Insured Copy CG 20 10 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 4 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company C.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy Page 2 of 2 © Insurance Services Office, Inc., 2018 CG 20 10 12 19 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-03 08/01/2023 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 5 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-03 08/01/2023 08/01/2024 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 6 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-03 08/01/2023 08/01/2024 80860521 | 23/24 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/9/2024 9:27:06 AM (EDT) | Page 7 of 7 This certificate cancels and supersedes ALL previously issued certificates. SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 7/22/2024 Aon Risk Services Central Inc. 200 E Randolph St. Chicago, IL 60601 317-841-6004 317-841-6006 Swiss Re Corporate Solutions Elite Ins 29700 Old Republic Insurance Company 24147 A 5,000,000CGP0000001-02 8/1/2024 8/1/2025 5,000,000 3 10,000 3 5,000,000 5,000,000 5,000,000 B MWTB 317015 24 8/1/2024 8/1/2025 2,000,000 3 PHYSICAL DAMAGE SELF-INSURED A CGU0000001-02 8/1/2024 8/1/2025 20,000,00033 20,000,000 B MWC 314311-24 8/1/2024 8/1/2025 3 2,000,000N 2,000,000 2,000,000 B Excess Auto Liability MWZX 317016 24 8/1/2024 8/1/2025 Limit 3,000,000 Al King A. I. King Insurance Agency, Inc. cummins@aikinginsurance.com 3 Cummins Inc. 500 Jackson Street Mail Code 91676 Columbus IN 47201-6258 81060551 3 3 City of Bremerton is listed as additional insured with a waiver of subrogation as required by written contract. City of Bremerton Attn: Noreen Bolo 345 6th Street, Suite 100 Bremerton WA 98337 General Liability, Auto Liability and Umbrella Policies are primary & non-contributory. 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 1 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED –OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 4 CONTRACTORS –COMPLETED OPERATIONS This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART PRODUCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) All persons or organizations as required by written contract or agreement Location And Description Of Completed Operations All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II –Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury" or "property damage" caused, in whole or in part, by "your work" at the location designated and described in the Schedule of this endorsement performed for that additional insured and included in the "products-completed operations hazard". However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 2 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 2 of 2 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-02 08/01/2024 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 3 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED – OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 3 CONTRACTORS – SCHEDULED PERSON OR ORGANIZATION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) Location(s) Of Covered Operations All persons or organizations as required by written contract or agreement All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II – Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury", "property damage" or "personal and advertising injury" caused, in whole or in part, by: 1.Your acts or omissions; or 2.The acts or omissions of those acting on your behalf; in the performance of your ongoing operations for the additional insured(s) at the location(s) designated above. However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following additional exclusions apply: This insurance does not apply to "bodily injury" or "property damage" occurring after: 1.All work, including materials, parts or equipment furnished in connection with such work, on the project (other than service, maintenance or repairs) to be performed by or on behalf of the additional insured(s) at the location of the covered operations has been completed; or 2.That portion of "your work" out of which the injury or damage arises has been put to its intended use by any person or organization other than another contractor or subcontractor engaged in performing operations for a principal as a part of the same project. Insured Copy CG 20 10 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 4 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company C.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy Page 2 of 2 © Insurance Services Office, Inc., 2018 CG 20 10 12 19 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-02 08/01/2024 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 5 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 08/01/2024 08/01/2025 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 6 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 08/01/2024 08/01/2025 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/22/2024 2:05:01 PM (EDT) | Page 7 of 7 This certificate cancels and supersedes ALL previously issued certificates. SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 7/20/2024 Aon Risk Services Central Inc. 200 E Randolph St. Chicago, IL 60601 317-841-6004 317-841-6006 Swiss Re Corporate Solutions Elite Ins 29700 Old Republic Insurance Company 24147 A 5,000,000CGP0000001-02 8/1/2024 8/1/2025 5,000,000 3 10,000 3 5,000,000 5,000,000 5,000,000 B MWTB 317015 24 8/1/2024 8/1/2025 2,000,000 3 PHYSICAL DAMAGE SELF-INSURED A CGU0000001-02 8/1/2024 8/1/2025 20,000,00033 20,000,000 B MWC 314311-24 8/1/2024 8/1/2025 3 2,000,000N 2,000,000 2,000,000 B Excess Auto Liability MWZX 317016 24 8/1/2024 8/1/2025 Limit 3,000,000 Al King A. I. King Insurance Agency, Inc. cummins@aikinginsurance.com 3 Cummins Inc. 500 Jackson Street Mail Code 91676 Columbus IN 47201-6258 81060551 3 3 City of Bremerton is listed as additional insured with a waiver of subrogation as required by written contract. City of Bremerton Attn: Noreen Bolo 345 6th Street, Suite 100 Bremerton WA 98337 General Liability, Auto Liability and Umbrella Policies are primary & non-contributory. 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 1 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED –OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 4 CONTRACTORS –COMPLETED OPERATIONS This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART PRODUCTS/COMPLETED OPERATIONS LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) All persons or organizations as required by written contract or agreement Location And Description Of Completed Operations All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II –Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury" or "property damage" caused, in whole or in part, by "your work" at the location designated and described in the Schedule of this endorsement performed for that additional insured and included in the "products-completed operations hazard". However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 2 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy CG 20 37 12 19 © Insurance Services Office, Inc., 2018 Page 2 of 2 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-02 08/01/2024 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 3 of 7 This certificate cancels and supersedes ALL previously issued certificates. THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED – OWNERS, LESSEES OR Swiss Re Corporate Solutions Elite Insurance Company Endorsement No. 3 CONTRACTORS – SCHEDULED PERSON OR ORGANIZATION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) Or Organization(s) Location(s) Of Covered Operations All persons or organizations as required by written contract or agreement All locations on file with the Company Information required to complete this Schedule, if not shown above, will be shown in the Declarations. A. Section II – Who Is An Insured is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability for "bodily injury", "property damage" or "personal and advertising injury" caused, in whole or in part, by: 1.Your acts or omissions; or 2.The acts or omissions of those acting on your behalf; in the performance of your ongoing operations for the additional insured(s) at the location(s) designated above. However: 1.The insurance afforded to such additional insured only applies to the extent permitted by law; and 2.If coverage provided to the additional insured is required by a contract or agreement, the insurance afforded to such additional insured will not be broader than that which you are required by the contract or agreement to provide for such additional insured. B.With respect to the insurance afforded to these additional insureds, the following additional exclusions apply: This insurance does not apply to "bodily injury" or "property damage" occurring after: 1.All work, including materials, parts or equipment furnished in connection with such work, on the project (other than service, maintenance or repairs) to be performed by or on behalf of the additional insured(s) at the location of the covered operations has been completed; or 2.That portion of "your work" out of which the injury or damage arises has been put to its intended use by any person or organization other than another contractor or subcontractor engaged in performing operations for a principal as a part of the same project. Insured Copy CG 20 10 12 19 © Insurance Services Office, Inc., 2018 Page 1 of 2 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 4 of 7 This certificate cancels and supersedes ALL previously issued certificates. Swiss Re Corporate Solutions Elite Insurance Company C.With respect to the insurance afforded to these additional insureds, the following is added to Section III –Limits Of Insurance: If coverage provided to the additional insured is required by a contract or agreement, the most we will pay on behalf of the additional insured is the amount of insurance: 1.Required by the contract or agreement; or 2.Available under the applicable limits of insurance; whichever is less. This endorsement shall not increase the applicable limits of insurance. All other terms and conditions of this policy shall remain unchanged. This endorsement forms a part of the policy to which attached, effective on the inception date of the policy unless otherwise stated herein. Insured Copy Page 2 of 2 © Insurance Services Office, Inc., 2018 CG 20 10 12 19 (The information below is required only when this endorsement is issued subsequent to the preparation of the policy.) Policy Number: Endorsement Effective Date: Named Insured: Cummins Inc. CGP0000001-02 08/01/2024 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 5 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 08/01/2024 08/01/2025 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 6 of 7 This certificate cancels and supersedes ALL previously issued certificates. Cummins Inc. CGP0000001-02 08/01/2024 08/01/2025 81060551 | 24/25 GL AU UMB WC (Custom Merged) | Shelly Pence | 7/20/2024 11:10:42 PM (EDT) | Page 7 of 7 This certificate cancels and supersedes ALL previously issued certificates.