HomeMy WebLinkAboutREAGAN AVE, 3625This Placard must be posted on or near building and the Permit
Permit # BB 13 00093 (3
Call .the followina Aaencv Teleohone Numbers for inspections:
Building Department Inspections Call: (360) 473-5870
WATER - Public Works - Water: (360) 473-5927
PW - Public Works - Engineering: (360) 473-5270
HEALTH - Kitsap Co. Health District: (360) 337-5285
Fire - Fire Department: (360) 473-5386
L&I - Dept. of Labor and Industry: (360) 415-4000
- Property
finishei
finished ti
- Reinspe,,�
requested
- Permit, a
be on site,
assessed.
i ' I .i
Inspection
Foundation Footings, Property lines shall be properly identified
Foundation Walls / Hold downs
Plumbing Groundwork
Underfloor Framing Inspection/Anchor Bolts & Washers/Hold
Shear Wall Panels/Braced Wall Panels
Approved
��/�Qr'i
Dat
6--22Downs
�� I
----� `""`�— __----
Mechanical Rough -In
Plumbing Rough -In
Gas Piping Pressure Test
VIA
71<
i S
L&I - Electrical Cover Inspection Before Framing (State of
Washington)
-OWL, '¢
?'vtl>
Framing Inspection (Mechanical & Plumb Rough -In, Elect Cover
Completed)
Insulation - Wall
Sheetrock Nailing
�t
Paved Driveway & parking areas
Insulation - Ceiling
Insulation - Underfloor
meq._ l3
Energy Code - Duct Testing - Provide signed affidavit to Bldg Dept
�J
Energy Code - Air Leakage Test (Blower Door Test)Q
c9ix�z
L&I - Electrical Final Inspection
PW - Final Inspection - Utilities
FIRE - Final Inspection
Final Inspection - Building
FINAL BUILDING (360) 473-5870
All of the above must be approved.
Occupancy approval for SFR only - Commercial
structures require a separate Certificate of Occupancy.
DO NOT OCCUPY BUILDING WITHOUT BUILDING DEPARTMENTAPPROVAL
PROTECT THIS CARD FROM THE WEATHER
lS/QYr-fes /�ai3���g3
PERMIT CENTER us �► FFe►�
I a-4
Ii�EN ��IA-1,
Permit Application
„ : �"� ` «trtti .c i.l» c mot tort.0 a.u�
(3Gt1) 173-.527.3 ` 1 as (360) lin-,i�/r
f.".1 n..,t.,..,,..1
To apply for a property address, Conner F- u-- - - - •
RESIDENTIAL REBUILD
YyX^W SINGLE-FAMILY RESIDENCE �~ _�
NE
�..._� IRESIDEwN i IAL ADDITION
NEW DUPLEX RESIDENTIAL REPAIR
!-'-I NEW MANUFACTURED HOME.
NEW GARAGEICARPORT L_1 NEVA ACCESSORY GUII_DING
sf Exterior -
DE • _ �(�e
ti Infar or
�* Separate demolition perrnti
`7 1j
Contact Public Worl<s for server cap permit (473-5270). Sergei/► � �,. �/ � / l ,, t\�0���
OTHER: l tl V T
IS THIS PROPERTY WITHIN 200 FEET OF A 00
Scope of work proposed:
New SFR �� r
Square Footage: Building: 1st Floor 802
2nd Floor 1 01
Plan Review Fee Perrri \ 5 Q 5
Valuation
�` IIINNN
gpplicaticn for r:i.!ch no permit is issued within 180 days fo!towing the da,
submitted for review may thereafter be returned to the applicant or destre
on by the applicant for a period not exceeding 180 days on request by the applicant, showing that circumstances beyond the control of
the app!i�nt have prevented action from being taken. No applicant strati be extended more than once. in order to renew action on an
for acti
xpiration, the applicant shalt resubmit plans and pay a new pl
app;ication atter ean review fee.
.9jt�/rclrfrf� c'''1`f ``
.,.:� (Print) Date
Applicant's Signature /
Lo
Rev. Oct. 2008
PERMIT CENTER
De t. of Communit Develo ment*345 - 6"' Street Suite 600*13remerton* WA*98337-1873
1 0 Mechanical A Plumbing
Type of Fuel: 6Electric C-1 Gas ❑ Oil ❑ Propane
Occupancy: PSResidential ❑ Commercial
Site Address: 3628 Reagan Ave.
CONTRACTOR: Peltram Plumbing OWNER: Highmark Homes
Address: 1929 W. Valley H«ry. S.
Auburn, WA 98001
Address: 16400 Southcenter Pkwy #210
City, State, Zip: Tukwila, WA 98188
City. Zip:
TOTAL FEES:
#:PELTRPI075DZ
Phone # (253)891-4388
_License
Contact Phone #: (253)891-8781
_
_ Tax ID/Parcel #: 5565-000-019-0005
\TO,
--i TYPE OF EQUIPMENT
NO.
TYPE OF FIXTURE
TOTAL FEES:
AIR HANDLING UNIT>10,000CFM
ATMOSPHERIC VACUUM BRKR 1-5
I—
AIR HANDLING UNIT <10,000 CFM
ATMOSPHERIC VACUUM BRKR >5
BATH FAN AND/OR EXHAUST FAN
BACKFLOW DEVICE <=2"
CLASS I HOOD & DUCT SYSTEM
_
BACKFLOW DEVICE > 2"
CLASS 2 HOOD & DUCT SYSTEM
BUILDING SEWER
CLOTHES DRYER W/ EXHAUST
j
CLOTHES WASHER
_
COMMERCIAL FURNACE/DUCT
COMMERCIAL FLOOR DRAIN
COMM. FURNACE>100,000 BTUS
DISHWASHER
DRAIN PIPE/VENT PIPE ALTERATION
COMPRESSORS
COOK STOVE W/ EXHAUST
DRii`'KING FOUNTAIN
_
I_
DUCT CHANGE W/O NEW FURNACE
FLOOR DRAIN
ELECTRIC FURNACE/HEAT PUMP
FLOOR SINKANDIRECT WASTE
_—
_I
EVAPORATIVE COOLER
GREASE INTERCEPTOR
HOSE BIBBS
FIREPLACE -GAS OR GAS LOG INSERT
1
FIREPLACE -WOOD, OR WOODSTOVE
INDUSTRIAL SAND/OIL INTERCEPTOR
GAS WATER HEATER & VENT
LAWN SPRINKLER W/ BACKFLOW DEV.
_
GAS PIPING
ROOF DRAIN
MISCELLANEOUS MECHANICAL
SHAMPOO SINK W/ BACKFLOW DEVICE
NATURAL GAS FURNACE/DUCTING
(
SINK (LAV, KITCHEN, MOP OR BAR)
PROPANE FURNACE/DUCTING
SUMP PUMP
PROPANE TANK (<2000 GALLONS)
HEATER
_
3
TUB AND/OR SHOWER UNIT
WATER CLOSET AND/OR URINAL
I—UNIT
101-11ER:
OTHER _
--OTHER:
OTHER:
MECHANICAL FEES:
PLUMBING FEES:
--
TOTAL FEES:
-
Applicant's Signature Date
PERMIT CENTER
Dept of Community Development*345 - 6`h Street Suite 600*Bremerton* WA*98337-1873
L (Mechanical ❑ ..Plumbing �
Type of Fuel: Cg Electric 11 Gas. ❑ Oil ❑ Propane
Occupancy: (;Residential CJ Commercial
SiteAddress: 3628 Reagan Ave,
CONTRACTOR: Indoor Comfort Systems, Inc.
OWNER: Highmark Homes
Address: 118 Violet Meadows, St. S.
Address: 16400 Southcenter Pkwy #210
City, State, Zip: Tacoma, WA11,98444
City, State, Zip: Tukwila, WA 98188
License #: INDOOCS1230H ';;
Phone # ( 253)891-4388
Contact Phone #: ( 253)539-1424
Tax ID/Parcel #: 5 5 6 5- 0 0 0- 019 - 0 0 0 5
NO. TYPE OF EQUIPMENT
AIR HANDLING UNIT >10,000CFM
AIR HANDLING UNIT <l 0,000 CFM
NO. TYPE OF FIXTURE
ATMOSPHERIC VACUUM BRKR 1-5
ATMOSPHERIC VACUUM BRKR >5
BATH FAN AND/OR EXHAUST FAN
BACKFLOW DEVICE <=2"
CLASS 1 HOOD & DUCT SYSTEM
BACKFLOW DEVICE > 2"
CLASS 2 HOOD & DUCT SYSTEM
BUILDING SEWER
CLOTHES DRYER W/ EXHAUST
CLOTHES WASHER
COMMERCIAL FURNACE/DUCT
COMMERCIAL FLOOR DRAIN
COMM. FURNACE>100,11000 BTUS
COMPRESSORS 1
DISHWASHER
DRAIN PIPE/VENT PIPE ALTERATION
COOK STOVE W/ EXHAUST
DRINKING FOUNTAIN
DUCT CHANGE W/O NEW FURNACE
FLOOR DRAIN
ELECTRIC FURNACE/HEAT PUMP
FLOOR S1NKANDIRECT WASTE
EVAPORATIVE COOLER
GREASE INTERCEPTOR
FIREPLACE -GAS OR GAS LOG INSERT .
FIREPLACE -WOOD, OR WOODSTOVE
GAS WATER HEATER & VENT
HOSE BIBBS
INDUSTRIAI. SAND/OIL INTERCEPTOR
LAWN SPRINKLER W/ BACKFLOW DEV.
GPIPING11
AS
MISCELLANEOUS MECHANICAL
ROOF DRAIN
SHAMPOO SINK W/ BACKFLOW DEVICE
NATURAL GAS FURNACE/DUCTING
SINK (LAV, KITCHEN, MOP OR BAR
PROPANE FURNACE/DUCTING
SUMP PUMP
PROPANE TANK (<2000 GALLONS)
TUB AND/OR SHOWER UNIT
UNIT HEATER
WATER CLOSET AND/OR URINAL
OTHER:
OTHER
OTHER:
OTHER:
MECHANICAL FEES:
PLUMBING FEES:
TOTAL FEES:
Applicant's Signature Date
CITY OF BREMERTION PERMIT NUMBER: B613 00093
DEPARTMENT OF COMMUNITY DEVELOPMENT DATE ISSUED: 05/07/2013
- 6th Street, Suite 606, Bremerton, WA 98337
(360)473-5275 Fax: (360) 473-5278
ASSESSOR NUMBER: 5565-000-019-0005 ZONING: R10 SITE ADDRESS: 3628 REAGAN AVE, LT 19
APPLICANT NAME: HIGHMARK HOMES LLC PHONE: (253) 255-5532VXIRATSION:
16400 SOUTHCENTER PKWY, SEATTLE, WA 98188
OWNER NAME: HIGHMARK HOMES LLC PHONE: (253) 255-5532: 16400 SOUTHCENTER PKWY STE 204, SEATTLE, WA 981
CONTRACTOR: HIGHMARK HOMES LLC PHONE: (253) 255-553: 16400 SOUTHCENTER PKWY #204, SEATTLE, WA 98188
LENDER NAME: PHONE: 0- :
SUBMITTED: 02/19/2013 APPROVED: 05/07/2 1 11/03/2013 STATUS: ISSUED
VALUATION: $194,531.83 Residential Building m t hanical/Plumbing
State Energy Code $50.00 16-4580 NEW SFR W/GAR & ORCI (BASIC #BS12 00014)
50% Plan Review Fee $61'01.33 16-4580 Building Code Editio IBC 2009
State Surcharge $4.50 0236 Occupancy Group: R-3
Plumbing Fixture Fee $13,2.00 2213 Type of Construction: Type V, Unprotected
Mechanical Fixture Fee $106.50 2215 Flood Zone:
Building Permit $1,692.00 2211 Setbacks: (Front) (Side) (Rear) (Other)
TOTAL FEES: $2,596.33 Sanitation Method: Public Sewer System
Number of Bedrooms: 4
Square Footage: R-3 Residential, 1 & 2 Family, Type VB 1,813
U Utility/Deck Covered (All Types) 128
U Utility/Private Garage, Type VB 384
Inspection Requests FIRE: Fire Inspections (360) 473-5386
DCD: Building Inspections (360) 473-5870 HEALTH: Kitsap County Health District (360) 337-5285
L8,I: Department of Labor and Industries i (360) 415-4000 PW&U: Public Works - Engineering (360) 473-5270
This permit shall become null and void if the described work authorized by this permit has not commenced within 180 days from the date of issuance, or if the work is suspended or
abandoned at any time after the work is commenced for is period of 180 days. It is the responsibility of the permit holder to see that the required inspections are made. Failure to obtain
required inspections may result in stoppage of the work luntil such time that the permit holder can susbstantiate to the City of Bremerton that the concealed work meets or exceeds code
requirements. Any demolition, testing, or financial burden shall be borne directly by the permit holder. Failure to substantiate code requirements will indemnify the City against any and all
responsibility or liability connected with the construction. I hereby certify that I have read and examined this permit and know the same to be true and correct. All provisions of laws and
ordinances governing this type of work will be complied with whether specified herein or not. The granting of a permit does not presume to give authority to violate or cancel provisions of
any State or local law regulating construction or the performance of the construction. If listing the owner as general contractor, I certify that I am exempt from the requirements of the State
Contractor's Registration Law under Section 3, Chapter 126, Laws of 1967. All revisions to an approved plan require DCD review and approval prior to performing work. All building and
tenant occupancy permits are required to pass final inspiction prior to permit expiration and obtain a certificate of occupancy prior to use or occupancy.
I have read, and agree to abide by the
�conditions
/of this permit including all conditions of zoning, building codes, and State and Federal laws.
SIGNATURE OF OWNER OR /�' �!?�.,( l� ✓�*� /c -
AGENT:
PRINTED NAME: ,Q/% <</+�'� LDATE: �� 7
CONDITIONS
City of Bremerton's approval of this application pertains only to the City's regulatory jurisdiction, and thus compliance with City
regulations does not necessarily ensure compliance with federal or state laws.
1. (OTHER) A fire sprinkler system is required for the parcels located in Bay Vista per the conditions for
approval of the plat. The sprinkler system may be installed in accordance with NFPA 13D for
a single family residence.
2. (DCD-CO DET. (NE Carbon Monoxide Alarms. For new construction, an approved carbon monoxide alarm listed_
in compliance with UL 2034 shall be installed outside of each separate sleeping area in the
immediate vicinity of the bedroom in dwelling units within which fuel -fired appliances are
installed andlin dwelling units that have attached garages. In a building where a tenancy
exists, the tenant shall maintain the CO alarm as specified by the manufacturer including
replacementllof the batteries.
3. (DCD-14) DCD: Approlved Plans, Engineering, Site Plan, Permit, and Conditions shall remain on site
and be available for inspection.
Any changes to plans shall be approved before construction is performed. Architect or
engineer of record shall approve the change before submitting a revision. A revision is
11
Page 1 of 5
CITY OF BREMERTON
DEPARTMENT OF COMMUNITY DEVELOPMENT
345 - 6th Street, Suite 600, Bremerton, WA 98337
(360) 473-5275 Fax: (360) 473-5278
PERMIT NUMBER: BB13 00093
DATE ISSUED: 05/07/2013
ASSESSOR NUMBER:
5565-000-019-0005
ZONING:
R10
SITE ADDRESS:
3628 REAGAN AVE, LT 19
APPLICANT NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY, SEATTLE, WA 98188
OWNER NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY STE 204, SEATTLE, WA 981
CONTRACTOR:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY #204, SEATTLE, WA 98188
LENDER NAME:
requirements for combustion and dilution air for gas-fired appliances shall be in accordance
PHONE:
0-
ADDRESS:
APPLIANCE LOCATIONS: IRC Section G2406.2. Fuel burning appliances shall not be
SUBMITTED:
02/19/2013
APPROVED: 05/07/2013
EXPIRATION:
11/03/2013 STATUS: ISSUED
Page 2 of 5
subject to a revision fee and additional fees for plan review and inspections.
4. (DCD-19)
Engineered Wood Floor Trusses & Truss Roof Systems shall have a site specific engineered Gllm—
design (Framing Plan) available at time of Under Floor and/or Framing Inspection.
ortlo-
5. (DCD-43)
Under -floor Inspection: After the foundation is complete, and the floor system is framed, but
prior to the installation of the sub -floor or floor sheathing, (exposed floor framing) the under-
floor area must be inspected, including all floor framing, anchor bolts, hold-downs and under-
floor posts and positive connection devices.
6. (DCD-060)
Property lines shall be properly marked. Setbacks are measured to the fnished wall of the 014de-
structure.
7. (DCD-FUEL APPLI/
COMBUSTION AIR: IRC Section M1701.1. Solid -fuel -burning appliances shall be provided 4?114
with combustion air in accordance with the appliance manufacturer's installation instructions.
Oil -fired appliances shall be provided with combustion air in accordance with NFPA 31. The
requirements for combustion and dilution air for gas-fired appliances shall be in accordance
with Chapter 24. Fireplaces shall comply with Section 1001.
APPLIANCE LOCATIONS: IRC Section G2406.2. Fuel burning appliances shall not be
installed in a sleeping room, bathroom, toilet room, or closet. Exception: direct vent
appliances (see IRC Section G2406.2 for additional exceptions).
PROTECTION OF APPLIANCES: IRC Section M1307.3. Appliances located in a garage or
carport or any other location subject to vehicle damage shall be protected by approved
barriers. Appliances having an ignition source shall be elevated so that the source of ignition
is at least 18" above the floor in garages and in any room that opens to the garage.
Appliances designed to be fixed in position shall be fastened or anchored in an approved
method.
CARBON MONOXIDE ALARMS: IRC Section 315. An approved carbon monoxide alarm
listed with UL 2034 shall be installed outside of each separate sleeping area in the
immediate vicinity of the bedroom. In a building where a tenancy exists, the tenant shall
maintain the CO alarm as specified by the manufacturer including replacement of the
batteries.
MANUFACTURER'S SPECS: IRC M1307.1. The manufacturer's operating and installation
instructions shall remain attached to the appliance until final inspection
8. (DCD-52)
DCD: Gas Piping: Fuel or gas piping shall be inspected after the installation of fuel/gas Arc
piping is complete, and before the attachment of fixtures, appliances, or shut-off valves. At
the time of inspection the test pressure shall be no less than 10 psi held for no less than 15
minutes. Appliances to be attached to the fuel/gas piping system shall not be used until the
final inspection has been performed and approved by a Building Inspector.
9. (DCD-04)
DCD: Plan Review Requirements: The attached plan review checklist and identified
corrections, along with the Energy Compliance Worksheet (when applicable) are part of the
approved plans and must remain attached thereto. It is the responsibility of the applicant to
make the corrections indicated on the plans. Once the plans are marked "APPROVED", they
shall not be changed or altered without authorization from the Building Official.
All proposed changes to "APPROVED" building plans that effect compliance with the City of
Bremerton Building and Fire Code as adopted and amended in BMC Title 17 and Title 18, or
any other City of Bremerton ordinance or regulation, must be reviewed and approved by the
Department of Community Development prior to construction. Failure to comply and/or
removal of attached documents will result in failure of required building inspections.
10. (DCD-47)
DCD: Reinspection Fee: All approved plans, the printed building permit, and the permit L
inspection placard, are required to be on-site for inspection purposes, and work to be
inspected shall be complete and ready for inspection. If an inspection is called for and plans
are not available on site, or the work is not ready for inspection, approval will not be granted.
In addition, a re -inspection fee will be charged and must be collected by the Department of
Community Development prior to any further inspections being performed or approvals
granted.
Page 2 of 5
CITY OF BREMERTON
DEPARTMENT OF COMMUNITY DEVELOPMENT
345 - 6th Street, Suite 600, Bremerton, WA 98337
(360)473-5275 Fax: (360) 473-5278
PERMIT NUMBER: BB13 00093
DATE ISSUED: 05/07/2013
ASSESSOR NUMBER:
5565-000-019-0005
ZONING:
R10
SITE ADDRESS:
3628 REAGAN AVE, LT 19
APPLICANT NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY, SEATTLE, WA 98188
OWNER NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY STE 204, SEATTLE, WA 981
CONTRACTOR:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY #204, SEATTLE, WA 98188
LENDER NAME:
Washington State Building code or of any other ordinances of the City of Bremerton.
PHONE:
0-
ADDRESS:
_/u'flc
SUBMITTED:
02/19/2013
APPROVED: 05/07/2013
EXPIRATION:
11/03/2013 STATUS: ISSUED
10. (DCD-02)
DCD: Validity of permit. The issuance or granting of a permit shall not be construed to be a
41APY,
permit for, or an approval of, any violation of any of the provisions of the Washington State
Building code or of any other ordinance of the City of Bremerton. Permits presuming to give
authority to violate or cancel the provisions of the Washington State Building code or other
ordinances of the City of Bremerton shall not be valid. The issuance of a permit based on
construction. documents and other data shall not prevent the building official from requiring
the correction of errors in the construction documents and other data. The building official is
also authorized to prevent occupancy or use of a structure where in violation of the
Washington State Building code or of any other ordinances of the City of Bremerton.
10. (DCD-01)
ASBESTOS: Prior to performing any renovation or demolition work, Puget Sound Clean Air
_/u'flc
Agency and Washington Department of Labor and Industries (L&I) regulations require an
asbestos survey be performed to determine whether there are asbestos -containing materials
in the work area or structure. The asbestos survey must be conducted by and EPA -certified
(AHERA) building inspector (except renovation or owner -occupied single family
residences).For more information, please contact Clean Air Agency through their web site at
www.pscleanair.org or by phone at 800-552-3565 or 206-343-8800. The L&I web site can be
found at www.ini.wa.gov[TradesLicensing/LicensingReq/Asbestos/default.asp.
LEAD-BASED PAINT: A contractor or person receiving compensation who is performing
renovation, repairs or painting on a residential building or a child -occupied facility built before
1978, must be trained and certified by an accredited training provider, and registered as a
Renovator by the Washington State Department of Commerce- Lead -Based Paint Program.
For further information please contact: The Department of Commerce website at:
www.commerce.wa.gov/lead, or call: (360) 586 -LEAD (5323).
10. (DCD-50)
Final Inspection Required: All building permits shall have a final inspection performed and
approved by the City of Bremerton Department of Community Development prior to permit
expiration. The failure to request a final inspection or failure to obtain final approval prior to
expiration may require a reactivation fee, or a new permit application if more than a year has
passed with no activity.
11. (DCD-38)
Shear Wall Inspection: Due to the complexity of the shear wall nailing patterns and hold-
down requirements contained within the engineered lateral design, a separate shear wall
inspection is required for this project. This inspection should be requested and performed
prior to the installation of exterior wall coverings, prior to the framing inspection, such that all
shear -wall nailing patterns may be observed, and the installation of all required hold-down
devices and required straps, etc. are in place in accordance with the engineer's lateral
design.
12. (DCD-08)
Plumbing work shall be performed by a Level 01 Journeyman Plumber licensed in the state
of Washington.
Residential plumbing work may be performed by a Level 01 or :Level 02 Journeyman
Plumber licensed in the state of Washington. Single family residential plumbing work may be
performed by the owner.
20. (DCD-CO DET. (EX
CARBON MONOXIDE ALARMS: IRC Section 315. In dwellings where fuel -fired
appliances exist or that have attached garages, an approved carbon monoxide alarm listed
with UL 2034 shall be installed outside of each separate sleeping area in the immediate
vicinity of the bedroom, unless the dwelling has been owner -occupied prior to July 1, 2010.
In a building where a tenancy exists, the tenant shall maintain the CO alarm as specified by
the manufacturer including replacement of the batteries. In existing dwellings with existing
fuel appliances, the CO alarm shall be installed by January 1, 2013.
23. (DCD-56)
Combustion Air: In buildings of unusually tight construction, or within a garage, all fuel-
9u
burning appliances, other than cooking appliances and domestic clothes dryers, shall obtain
combustion air from outside in accordance with the International Mechanical Code,
International Fuel Gas Code and/or the International Residential Code.
Page 3 of 5
CITY OF BREMERTON
DEPARTMENT OF COMMUNITY DEVELOPMENT
345 - 6th Street, Suite 600, Bremerton, WA 98337
(360)473-5275 Fax: (360) 473-5278
PERMIT NUMBER: BB13 00093
DATE ISSUED: 05/07/2013
ASSESSOR NUMBER:
5565-000-019-0005
ZONING:
R10
SITE ADDRESS:
3628 REAGAN AVE, LT 19
APPLICANT NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY, SEATTLE, WA 98188
OWNER NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY STE 204, SEATTLE, WA 981
CONTRACTOR:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY #204, SEATTLE, WA 98188
LENDER NAME:
PHONE:
0-
ADDRESS:
SUBMITTED:
02/19/2013
APPROVED: 05/07/2013
EXPIRATION:
11/03/2013 STATUS: ISSUED
25. (OTHER) Development must comply with the Sylvan Way Meadows approval of plat conditions.
26. (LU9) All driveways and areas used for loading, parking, and maneuvering motorized vehicles shall JUkA
have a paved surface. Two off-street parking spaces are required for every residential unit
pursuant to BMC 20.48.
27. (OTHER) Driveways may not exceed 20' in width.
28. (DCD-42) Geotechnical inspections and tests shall be performed in accordance with the geo-technical
engineer's requirement and recommendations. All inspection results or density tests shall be.
provided to the Department of Community Development prior to requesting any soils related
inspections (such as footing or foundation inspections).
Required geotechnical inspections:
1. Structural fill and compaction
2. Soil bearing
3. Retaining wall and rockery placement
4. Ongoing site monitoring during wet weather construction
5. Final grading
MINIMUM INSPECTIONS REQUIRED
To request an inspection, please call (360) 473-5870 and be sure to provide your permit number, name on permit, site address, contact phone
number, and inspection type. To register for on-line inspection access, visit the City's website at www.ci.bremerton.wa.us.
Geotechnical inspection for grading and fill
Geotechnical Report for Structural Fill and Compaction, Soil Bearing
Foundation Footings, Property lines shall be properly identified
Foundation Walls / Hold downs
Geotechnical Engineer Final Letter, Send report to Bldg Dept
Plumbing Groundwork
Underfloor Framing Inspection/Anchor Bolts & Washers/Hold Downs
Shear Wall Panels/Braced Wall Panels
Mechanical Rough -In
Plumbing Rough -In
Gas Piping Pressure Test
L&I - Electrical Cover Inspection Before Framing (State of Washington)
Framing Inspection (Mechanical & Plumb Rough -In, Elect Cover Completed)
Insulation - Wall
Sheetrock Nailing
Paved Driveway & parking areas
Insulation - Ceiling
Insulation - Underfloor
Energy Code - Duct Testing - Provide signed affidavit to Bldg Dept
Energy Code - Air Leakage Test (Blower Door Test)
L.&I - Electrical Final Inspection
PW - Final Inspection - Utilities
FIRE - Final Inspection
Final Inspection - Building
Page 4 of 5
CITY OF BREMERTON
DEPARTMENT OF COMMUNITY DEVELOPMENT
345 -6th Street, Suite 600, Bremerton, WA 98337
(360)473-5275 Fax: (360) 473-5278
PERMIT NUMBER: BB13 00093
DATE ISSUED: 05/07/2013
ASSESSOR NUMBER:
5565-000-019-0005
ZONING:
R10
SITE ADDRESS:
3628 REAGAN AVE, LT 19
APPLICANT NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY, SEATTLE, WA 98188
OWNER NAME:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY STE 204, SEATTLE, WA 981
CONTRACTOR:
HIGHMARK HOMES LLC
PHONE:
(253) 255-5532
ADDRESS:
16400 SOUTHCENTER PKWY #204, SEATTLE, WA 98188
LENDER NAME:
5
PHONE:
0-
ADDRESS:
1
SUBMITTED:
02/19/2013 APPROVED: 05/07/2013
EXPIRATION: 11/03/2013 STATUS: ISSUED
FIXTURE LIST
Qty
Description
Qty
Description
3
R -Tub and/or Shower Unit
1
R -Clothes Dryer with Exhaust
2
R -Hose Bibs
1
R -Cook Stove with Exhaust
6
R -Sink (Lavatory, Kitchen, Mop or Bar Sink)
1
R -Range Hood
3
R -Water Closet and/or Urinal
5
R -Bath Fan and/or Exhaust Fan
1
R -Dish Washer
1
R -Electric Furnace or Heat Pump +/- Ducting
1
R -Clothes Washing Machine
Page 5 of 5
Basic Plan System
RECEIVER Page 4 of 4
City of Bremertoai
W �t ,.�,� I MAR 12 2013
Department of
Community Deve!oomert
BASIC PLAN CHECKLIST
Developer/Applicant Office Use Only
NAME Highmark Homes LLC PERMIT #
BASIC #BS1 200014 PLAN 1 81 3B CODE CYCLE
L2M-1813 Roff Elev B
Basic Approval Date: 12-14-12
This checklist accompanies your "Basic" permit issuance & approval for use.
This Basic permit may be used during the current code cycle and must be re-
established upon the adoption of new code edition.
For future submittals using your established basics, your submittal documents
will consist of the following:
✓ This Completed Checklist
✓ Completed Application
✓ 4 Site Plans showing location of structure on parcel
✓ Site Specific letter from Engineer of Record approving the use with original
seal & signature or blanket letter. Engineer's License Expires
Basic will need a new letter for the Basic Permit after this date.
✓ 2 Copies of approved basic plans
✓ 2 Copies of approved engineering calculations and structural pages
✓ 2 Copies of approved Energy Form
✓ 2 Copies of approved Mechanical & Plumbing forms
✓ Clearly identify all options to be used and cross off all options NOT used
✓ 2 copies of the Geotechnical Engineer Report if performed for the site
✓ Septic: 2 Copies of accepted site plan or concurrent review from Health
District
a
Uo
-4ule
L
Q
o�
A
UQ
L
UQ
X03
L
(DZ5
C�
W
v)
-
C
p c�tf
N �
m Q
2._m
LL cn°r.
1EM
1. Site Address: 3628 Reagan Ave.
2. Are any areas being developed on the site within 200 feet of the shoreline? Yes &0
i NOTE: If yes, please fill out a Shoreline Permit Submittal Checklist (WAC 173-27-180)
CRITICAL AREA CHECKLIST:
3. Slope is calculated by dividing the vertical
distance by the horizontal distance and then
multiplying the result by 100. Example:
Vertical
Distance = 20'
orizontal
Distance = 100'
Vertical 20 feet
Horizontal 100 feet = .2 X 100 = 20% slope
Check all that apply to the site and areas within 200 feet of the
site.
-- F lat: less than 5 -feet elevation change over entire site.
V",
/Rolling: slopes on site generally less than 15%.
Hilly: slopes present on site of more than 15% and
less than 30%.
Steep: grades of greater than 30% present on site.
Other (please describe):
4. Does the site or properties within 200 feet of the site contain areas of standing water, creek or an area
where water flows across the ground surface? Yes/o
5. is there an apparent wetland present on the site or on properties within 200 feet of the site? es No
RESIDENTUL DEVELOPMENT WORKSHEET:
6. What is the amount of grading proposed (in cubic yards), not including foundation area'?
Fill amount Cut amount
Total grading L I✓S s f0t"" .5 -yk.,'
NOTE: Grading over 50 cubic yards requires a separate permit.
Wil l the grading material be imported or exported?` Yes / No
7. Please provide the following information. The setbacks are measured from the finished exterior wall
of structure to the lot line, not from the foundation. Accurately represent your setbacks on site plan.
DESCRIPTION
PROPOSED_
Front yard setback
Rear yard setback*
If r-1. o''
Side yard setback
_ _7_
Side yard setback
iVlaxlIII LIM 11el911t
Development coverage* * _
_ — --. _-. --- -
Number of off-street
parking spaces _- -
I t;,.,,,, Irp
Residential Quest.,,....a....
*Use this as the second front yard setback
for corner lots and through lots.
**Development Coverage is defined as
that portion of a lot covered by impervious
surface areas of all structures, and
impervious paved areas, such as
driveways and walkways.
0
Revision: October 2008
Oslaouo /I/
SEGA Engineers,
Structural & Civil Consulting Engineers Cty R, C I�Vof FD
November 5, 2012
To: Building Official
City of Bremerton Department of
Community Development
From: Greg Thesenvitz, PE/SE
Principal
Re: Site specific structural calculations.
-MAR 12 2013
Department of
Commurjty Development
SEGA Engineers has provided structural calculations for Plan L2M-1813 prepared by
Landmark Design. The calculations are for a generic site with a design criteria of a 30
psf snow load, an 85 mph Exposure B wind load, and Seismic Zone D. This is to verify
that the calculations and design are approved for use for the following project and
location:
Highmark Homes.
SyKlan Way Meado%ls, Lots 1 - 44.
Bremerton, Washington.
Please address any questions to SEGA Engineers.
Cc: File 09-070
22939 SE 292°d Place - Black Diamond, Washington 98010 - (360) 886-1017
L ®®®
LANDMARK DESIGN
residential ❖ commercial interiors
BASE PLANT RELEASE
November 6, 2012
Assigned to: Highmark Homes
Owner of Base Plan: Landmark Design Inc.
Jurisdiction of Application: City of Bremerton
Plan: L2M-1813
The above Assigned Party has permission from Landmark Design Inc. to submit
the listed plan for a base plan permit and build in Sylvan Way Meadows lots 1-44.
Landmark Design Inc. will retain ownership of the base plan. Please proceed.
Thank you for your consideration.
Sincerely,
5e�vin Bentson
Landmark Design, Inc.
1202 Main St. #104 .• Sumner, WA s 98390
Ph: 253-826-7808: Fax: 253-826-4946 r vk�-v.landmarkplans.com
BUILDING PERMIT
INSPECTION CARD
3625 REAGAN AVE Lot 6
New sfr w/attached garage &
covered porch
PROTECT THIS CARD FROM THE WEATHER : ' ' . •
Building c21 Plumbing ® Mechanical Alarm/Sprinkler
This Placard must be posted on or near building and the Permit &"Approved" plans must be at the site.
Permit # BB 13 00709 POST 0H- SITE
Call the following Agency Telephone Numbers for
- Property lines shall be properly identified and marked before
inspections:
Notes
foundation footing inspection. Setbacks are measured to the
Building Department Inspections:
(60) 473-5870
finished wall structure.
Water -Public Works:
(360) 473-5927
- Reinspection fee may be assessed if inspection has been
PW - Public Works = Engineering:
(360) 473-5270
requested when not ready or corrections are not completed.
Plumbing Rough -In
- Permit, approved plans, engineering, and inspection card shall
Kitsap Public Health:
(360) 337-5235
be on site during construction or Reinspection Fee may be
Fire - Fire Department:
(360) 473-5386
assessed.
L&I - Dept. of Labor and Industry:
(360) 415-4000
Inspection
APP
DATE
Notes
Foundation Footings, Property lines shall be properly
identified'
Foundation Walls / Hold downs
Underfloor Framing Inspection/Anchor Bolts &
Washers/Hold Downs
Plumbing Rough -In
At&
a -Z-7 ,I4
L
Mechanical Rough -In
Z ��
Gas Piping Pressure Test
FIRE - Fire Sprinkler/Fire Alarm Cover
Shear Wall Panels/Braced Wall Panels
L&I - Electrical Cover Inspection Before Framing (State
of Washington) '
a +'
*3-Z u
Framing Inspection (Mechanical & Plumb Rough -In,
Elect Cover Completed)'21,
Insulation - Wall
Sheetrock Nailing
Energy Code - Duct Testing - Provide signed affidavit to
Bldg Dept
Energy Code - Air Leakage Test (Blower Door Test)
(
4-10-t-4-
,r�
Insulation - Ceilingeeu
Insulation - Underfl6or
IdU
PW = Sewer Lateral�3a
PW - Driveway approach final .
L&I - Electrical Final Inspection
Paved Driveway &!;parking areas
FINAL BUILDING (360) 473-5870
All of the above must be approved. Approved Final Inspection grants occupancy for single-family residence only.
Commercial structures require separate Certificate of Occupancy.
DO NOT OCCUPY BUILDING WITHOUT BUILDING DEPARTMENT APPROVAL
Page I
BUILDING PERMIT
INSPECTION CARD
PROTECT THIS CARD FROM THE WEATHER
3625 REAGAN AVE Lot 6
New sfr w/attached garage &
covered porch
P Notes
Inspection APP DATE
PW - Final Inspection - Utilities . S
FIRE - Final Inspection K(,Gj L4 -Z$- t
Final Inspection - Building
FINAL BUILDING ,(360) 473-5870
All of the above must be approved. Approved Final Inspection grants occupancy for single-family residence only.
Commercial structures require separate Certificate of Occupancy.
DO NOT OCCUPY BUILDING WITHOUT BUILDING DEPARTMENT APPROVAL
Page 2 of 2
................
City of Bremerton PERMIT NUMBER: BB13 00709
Department of Community Development DATE ISSUED: 02/10/2014
00, Bremerton WA 98337 SITE ADDRESS: 3625 REAGAN AVE Lot 6
• . . (3660)) 473-526th Street,
Fax;t, Ste. 360) 473-5278
ASSESSOR NUMBER:
5565-000-006-0000
ZONING: CITY
Name
Phone
Address
Access Code
APPLICANT: HIGHMARK
HOMES LLC
16400 SOUTHCENTER PKWY STE 210
JSNBP-SVJHO
TUKWILA, WA 98188
OWNER: HIGHMARK
HOMES LLC
16400 SOUTIICENTER PKWY STE 210
JSNBP-SVJIIO
TUKWILA, WA 98188
CONTRACTOR: HIGHMARK
HOMES LLC
253-255-5532
16400 SOUTHCENTER PKWY #204
05KXB-RN8JG
SEATTLE, WA 98188
LENDER:
SUBMITTED:
11/06/2013
APPROVED: 02/10/201PIRATION:
08/09/2014 STATUS:
ISSUED
VALUATION:
$197,016.48
w/ echanical/Plumbing
Residential Building Perme/
NEW SFR
New sfr w/attached garage
& covered porch
Mechanical Fixture Fee
$121.25
Building Code Edition:
IRC:2012
State Surcharge
$4.50
State Energy Code
$50.00
Occupancy Group:
R -3/U
Building Permit
$1,713.00
Type of Construction:
V -B SPR
Plan Review Fee
$1,113.45
Flood Zone:
Plumbing Fixture Fee
$118.00
Setbacks:
////: (F/L/RT/R/O)
. _.___._,.,......r.. __._.__ _
__........_.,.....,....._ ..,......._..
Sanitation Method:
SEWER
TOTAL FEES:
$3,120.20
Number of Bedrooms:
4.00
Inspection Requests: FIRE: Fire Inspections (360) 473-5386
DCD: Building Inspections: (360) 473-5870 HEALTH: Kitsap County health District (360) 337-5285
L&L• Department of Labor and Industries (360) 415-4000 PW&U: Public Works - Engineering (360) 473-5270
This permit shall become null and void if the described work authorized by this permit has not commenced within 180 days from the date of issuance, or if the work is
suspended or abandoned at any time after the work is commenced for a period of 180 days. It is the responsibility of the permit holder to see that the required inspections are
made. Failure to obtain required inspections may result in stoppage of the work until such time that the permit holder can substantiate to the City of Bremerton that the
concealed work meets or exceeds code requirements. Any demolition, testing, or financial burden shall be borne directly by the permit holder. Failure to substantiate code
requirements will indemnify the City against any and all responsibility or liability connected with the construction. 1 hereby certify that 1 have read and examined this permit
and know the same to be true and correct. All provisions of laws and ordinances governing this type of work will be complied with whether specified herein or not. The
granting of a permit does not presume to give authority to violate or cancel provisions of any State or local law regulating construction or the performance of the
construction. If listing the owner as general contractor, 1 certify that I am exempt from the requirements of the State Contractor's Registration Law under Section 3, Chapter
126, Laws of 1967. All revisions to an approvedi1plan require DCD review and approval prior to performing work. All building and tenant occupancy permits are required to
pass final inspection prior to permit expiration and obtain a certificate of occupancy prior to use or occupancy.
SIGNATURE OF OWNER OR AGENT
PRINTED NAME:
CONDITIONS
City of Bremerton's approval of this application pertains only to the City's regulatory jurisdiction,
does not necessarily ensure compliance with federal or state laws.
thus compliance with City regulations
Printed by: Wolf, Valarie on: 02/10/2014 09:17 AM
Pace 1 oF4
City of Bremerton
Department of Community Development
PERMIT NUMBER: BB13 00709
DATE ISSUED: 02/10/2014
' �'11
345 - 6th Street, Ste. 600, Bremerton WA 98337 SITE ADDRESS: 3625 REAGAN AVE Lot 6
(360) 473-5275 Fax: (360) 473-5278
Printed by: Wolf, Valarie on: 02/10/2014 09:17 AM
Pagc 2 of4
ASBESTOS AND LEAD-BASED PAINT:
1. (DCD-01)
ASBESTOS: Prior to performing any renovation or demolition work, Puget Sound Clean Air Agency and Washington
Department of Labor and Industries (L&I) regulations require an asbestos survey be performed to determine whether there are
asbestos -containing materials in the work area or structure. The asbestos survey must be conducted by and EPA -certified
(AHERA) building inspector (except renovation or owner -occupied single family residences).For more information, please
contact Clean Air Agency through their web site at www.pscleanair.org or by phone at 800-552-3565 or 206-343-8800. The
L&I web site can be found at www.Ini.wa.gov/ FradesLicensing/LicensingReq/Asbestos/default.asp.
LEAD-BASED PAINT: A contractor or person receiving compensation who is performing renovation, repairs or painting on
a residential building or a child -occupied facility built before 1978, must be trained and certified by an accredited training
provider, and registered as a Renovator by the Washington State Department of Commerce- Lead -Based Paint Program. For
further information please contact: The Department of Commerce website at: www.commerce.wa.gov/lead, or call: (360)
586 -LEAD (5323).
CONTRACTOR: A contractor?s registration issued by Washington State Dept. of Labor & Industries is required for anyone
who contracts or submits bids for construction work, including new construction, alterations, repairs, or anyone who consults
or superintends, improves, demolishes, develops residential property for sale, or ?flips? houses. Contact L & I at (360)415-
4000 for infomlation.
DCD: Validity The issuance be to be a for, or an approval of, any
2. (DCD-02)
of permit. or granting of a permit shall not construed permit
violation of any of the provisions of the Washington State Building code or of any other ordinance of the City of Bremerton.
Permits presuming to give authority to violate or cancel the provisions of the Washington State Building code or other
ordinances of the City of Bremerton shall not be valid. The issuance of a pennit based on construction documents and other
data shall not prevent the building official from requiring the correction of errors in the construction documents and other
data. The building official is also authorized to prevent occupancy or use of a structure where in violation of the Washington
State Building code or of any other ordinances of the City of Bremerton.
A
3. (DCD-47)
DCD: Reinspection Fee: All approved plans, the printed building permit, and the permit inspection placard, are required to be
on-site for inspection purposes, and work to be inspected shall be complete and ready for inspection. If an inspection is called
for and plans are not available on site, or the work is not ready for inspection, approval will not be granted, in addition, a re-
inspection fee will be charged and must be collected by the Department of Community Development prior to any further
inspections being performed or approvals granted.
DCD: Approved Plans, Engineering, Site Plan, Permit, Conditions remain on site and be available for inspection.
4. (DCD-14)
and shall
Any changes to plans shall be approved before construction is performed. Architect or engineer of record shall approve the
change before submitting a revision. A revision is subject to a revision fee and additional fees for plan review and inspections.
Plumbing be by Level 01 Journeyman Plumber licensed in the state of Washington.
5. (DCD-08)
work shall performed a
Residential plumbing work may be perfonned by a Level 01 or :Level 02 Journeyman Plumber licensed in the state of
Washington. Single family residential plumbing work may be performed by the owner.
issued through Labor & Industries (L&I) is for any new, modified, repair, replacement,
6. (DCD-10)
A separate electrical permit required
service, maintenance, or temporary installations. Electrical work is inspected by L&I prior to cover and the framing
inspection. Contact L&I at 360-415-4000 or www.Ini.wa.gov. (RCW 19.28)
listed in with UL 2034
7. (DCD-CO DET. (NEW))
Carbon Monoxide Alarms. For new construction, an approved carbon monoxide alaml compliance
shall be installed outside of each separate sleeping area in the immediate vicinity of the bedroom in dwelling units and on
each level of the dwelling. In a building where a tenancy exists, the tenant shall maintain the CO alarm as specified by the
manufacturer including replacement of the batteries.
8. (DCD-FUEL
COMBUSTION AIR: iRC Section M1701.1. Solid -fuel -burning appliances shall be provided with combustion air in
APPLIANCES)
accordance with the appliance manufacturer's installation instructions. Oil -tired appliances shall be provided with combustion
air in accordance with NFPA 31. The requirements for combustion and dilution air for gas-fired appliances shall be in
accordance with Chapter 24. Fireplaces shall comply with Section 1001.
APPLIANCE LOCATIONS: iRC Section G2406.2. Fuel burning appliances shall not be installed in a sleeping room,
bathroom, toilet room, or. closet. Exception: direct vent appliances (see IRC Section 62406.2 for additional exceptions).
PROTECTION OF APPLIANCES: IRC Section M1307.3. Appliances located in a garage or carport or any other location
subject to vehicle damage shall be protected by approved barriers. Appliances having an ignition source shall be elevated so
that the source of ignition is at least 18? above the floor in garages and in any room that opens to the garage. Appliances
designed to be fixed in position shall be fastened or anchored in an approved method.
CARBON MONOXIDE ALARMS: IRC Section 315. An approved carbon monoxide alarm listed with UL 2034 shall be
installed outside of each separate sleeping area in the immediate vicinity of the bedroom. In a building where a tenancy exists,
the tenant shall maintain the CO alarm as specified by the manufacturer including replacement of the batteries.
MANUFACTURER?S SPECS: IRC M1307. L The manufacturer?s operating and installation instructions shall remain
attached to the appliance until final inspection
9. (DCD-52)
DCD: Gas Piping: Fuel or gas piping shall be inspected after the installation of fuel/gas piping is complete, and before the
attachment of fixtures, appliances, or shut-off valves. At the time of inspection the test pressure shall be no less than 10 psi
held for no less than 15 minutes. Appliances to be attached to the fuel/gas piping system shall not be used until the final
inspection has been performed and approved by a Building Inspector.
Printed by: Wolf, Valarie on: 02/10/2014 09:17 AM
Pagc 2 of4
City of Bremerton
Department of Community Development
PERMIT NUMBER: BB13 00709
DATE ISSUED: 02/10/2014
345 - 6th Street, Ste. 600, Bremerton WA 98337 SITE ADDRESS: 3625 REAGAN AVE Lot 6
(360) 473-5275 Fax: (360) 473-5278
10. (DCD-04)
DCD: Plan Review Requirements: The attached plan review checklist and identified corrections, along with the Energy
Compliance Worksheet (when applicable) are part of the approved plans and must remain attached thereto. It is the
responsibility of the applicant to make the corrections indicated on the plans. Once the plans are marked "APPROVED", they
shall not be changed or altered without authorization from the Building Official.
All proposed changes to "APPROVED" building plans that effect compliance with the City of Bremerton Building and Fire
Code as adopted and amended in BMC Title 17 and Title 18, or any other City of Bremerton ordinance or regulation, must be
reviewed and approved by the Department of Community Development prior to construction. Failure to comply and/or
removal of attached documents will result in failure of required building inspections.
11. (DCD-19)
Engineered Wood Floor Trusses & Truss Roof Systems shall have a site specific engineered design (Framing Plan) available
12. (DCD-060)
at time of Under Floor and/or Framing Inspection.
Property lines shall be properly marked. Setbacks are measured to the fnished wall of the structure.
13. (DCD43)
Under -floor Inspection: After the foundation is complete, and the floor system is framed, but prior to the installation of the
sub -floor or floor sheathing, (exposed floor framing) the under -floor area must be inspected, including all floor framing,
14. (DCD-38)
anchor bolts, hold-downs and under -floor posts and positive connection devices.
Shear Wall Inspection: Due to the complexity of the shear wall nailing patterns and hold-down requirements contained within
a
the engineered lateral design, a separate shear wall inspection is required for this project. This inspection should be requested
and performed prior to the installation of exterior wall coverings, prior to the framing inspection, such that all shear -wall
nailing patterns may be observed, and the installation of all required hold-down devices and required straps, etc. are in place
in accordance with the engineer's lateral design.
15. (DCD-50)
Final Inspection Required: All building permits shall have a final inspection performed and approved by the City of
Bremerton Department of Community Development prior to permit expiration. The failure to request a final inspection or
failure to obtain final approval prior to expiration may require a reactivation fee, or a new permit application if more than a
year has passed with no activity.
16. (Custom)
Development must comply with the Conditions of Plat Approval and Title 20 in the BMC. No structures shall be placed
within the setbacks, driveways shall not exceed 20' in width, height shall not exceed 35' from average grade to the peak of the
structure, and all development not shown on the approved plans must be submitted for review and approval prior to
construction.
17. (LU9)
All driveways and areas used for loading, parking, and maneuvering motorized vehicles shall have a paved surface. Two off-
street parking spaces are required for every residential unit pursuant to BMC 20.48.
18. (Custom)
FIRE SPRINKLER SYSTEMS REQUIRED: Pursuant to the Hearings Examiners Decision for the Preliminary Plat approval
(File # BP06-00009) and again required with the Final Plat approval (File # BP09 00009) and as documented with the Kitsap
County Auditor (AFN 200905070193 v32 p214) a fire sprinkler systems are required in each house if the dead end is over
500? long. As the access road to the plat is over 500? long, all homes require a fire sprinkler system. A separate permit is
required and no portion of the system may be installed before the permit has been reviewed and issued.
MINIMUM INSPECTIONS REQUIRED
To request an inspection, please
call (360) 473-5870 and be sure to provide ,your permit number, name on permit, site address, contact phone
number, and inspection type. To register for on-line inspection access, visit the City's website at www.ci.bremcrton.wa.us.
Inspection
Description
FOUNDATION - FOOT
Foundation Footings, Property lines shall be properly identified
ELECTRICAL COVER
L&I - Electrical Cover Inspection Before Framing (State of Washington)
INSULATION - WALL
Insulation - Wall
GAS PIPING
Gas Piping Pressure Test
FRAMING
Framing Inspection (Mechanical & Plumb Rough -In, Elect Cover Completed)
SHEETROCK
Sheetrock Nailing
SHEAR WALL
Shear Nall Panels/Braced Wall Panels
FRAMING - UNDERFLOOR Underfloor Framing htspection/Anchor Bolts & Washers/Hold Downs
MECHANICAL
Mechanical Rough -In
PLUMBING - ROUGH
Plumbing Rough -In
FOUNDATION - WALL
Foundation Walls / Hold downs
ENERGY - AIR LEAK
Energy Code - Air Leakage Test (Blower Door Test)
PW&U - SEWER LATERAL PW - Sewer Lateral
Printed by: Wolf, Valarie on: 02/10/2014 09:17 AM
Page 3 0l'4
City of Bremerton PERMIT NUMBER: BB13 00709
Department of Community Development DATE ISSUED: 02/10/2014
345 - 6th Street, Ste. 600, Bremerton WA 98337 SITE ADDRESS: 3625 REAGAN AVE Lot 6
a , 1 (360) 473-5275 Fax: (360) 473-5278
PW&U - UTILITIES
PW - Final Inspection - Utilities
PW&U - DWY APPROACH
PW - Driveway approach final
ELECTRICAL FINAL
L&I - Electrical Final Inspection
INSULATION - UNDERFL
Insulation - Underfloor
FINAL - BUILDING
Final Inspection - Building
INSULATION - CEILING
Insulation - Ceiling
ENERGY - DUCT TESTIN
Energy Code - Duct Testing - Provide signed affidavit to Bldg Dept
DRIVEWAY
Paved Driveway & parking areas
FIRE - COVER
FIRE - Fire Sprinkler/Fire Alarm Cover
FIRE - FINAL
FIRE - Final Inspection
FIXTURE LIST
Qty . Fixture Type
Qty
Fixture Type
I R -CLOTHES DRYER
I
R -CLOTHES WASHER
I R -COOK STOVE
l
R -DISH WASHER
4 R -FAN
2
R -HOSE BIB
I R -FIREPLACE -GAS
5
R -SINK
1 R -FURNACE -ELECTRIC
2
R-TUB/SHOWER
I R-GASPIPE SYSTEM
3
R -WATER CLOSET
I R -WATER HEATER GAS
Printed by: Wolf, Valarie on: 02/10/2014 09:17 AM
G
_ - - IRECEI TED 66 /3 C- 7a
city OfBremertoPERMIT CENTER
NOV 0 6 2013
Department of
Community Development Building Permit Application
ll_—��u tmcul c,1�Couunul,it • llc�•c10 nucnl ` �I l:i - (ilh Surd Suitc• 600 " 13rcnurlo„ - 1N'A � 98X;7-1 ti%3
-�-:l
(:,bt)) 17,:,_.fa t.ts
(360)-1i11_.^ri=)i �!`'nc.ci.l>rciucliau.t�a.u�
Site Address:
3625 Reagan Ave.
To apply for a property address, contact Pubt;c lh'orks at (360) A73-5270
OWNER: Same
COPV7RAGi0F:�Highmark Homes
1 6400 Southcenter Pkwy. #21 Address...... _ ..
:
/address_-..._. _ l_ _- WA _
irFTukwia, _ 98188
._.___..---__.-___._.
- -"� �HIGHMHL904R7
12 -27t1one,t'.
L-ic on5r ft << I: xp. l��lt(: � .__ ____.__ _ ent Name: Mike �Goral .___._
-.. -- - - Authorized Ag..__.___.-_-
Contact Name: Thomas Tollen 14 LWY
16400 _
---------•- Southcenter _
Address:
_....`. L-_._...:.,.__..._. 255-5532 #
Pkw
110i1C.'+`: 53 _._.__. ukwila� 88
Cont�.;c t } __. _____ _:_ .,tate,, Z- - ._.
_ ___..._ -Windermere. com Cit/, _�-...:. - WA
9 _
thom'---�"t—@.-w-i-.n-dermere.com -----=
II nlail addre.:;s: _... __- ____._..•_-_____. -__ ---._M_ ___ Phone #: .( 2 5 3) 2 5 5 - 5 5 3 2 _.._..
Tax ID/Parcel #: 5565-000-006-0000 _ _.__-_ mike@highmarkhomes . us
t �,Entic C:111ail address .
X� ;�e;:�cr �_� -
�~ ' I�iteration���Addition
- (Please check --
t - - (tel (drew t-onhtructilm -I ..J _�_
Sthat iti thl` tapt�ilr:ati(�tl sar? (P -__ e C le__..�
I__.j r;r-su)rr�•rlAl..Izr:ritln.0
NEW SINGLE-FAMILY RESIDENCE I:1_SIDt i� I lAi_ ADDI l ION
1-1 NEW DUPLEX RESIDENTIAL REPAIR
i ..I NEW MANUFACTURED HOME NI_.y;l ACCP-`;SUrtY DUILDING
j NEW GARAGE/CARPORT i4,tnt(iaGon V!4^,11 _.____..::i 1(ooi (;ectiun"
:.,
. Ini„rioi .------.....''f �-••tcriar
Separate demolition permit and fees 1eqed eor to demolition petmit issuance.
Contact Public (,Vorlfs for setter cep permit (473-5270). Set.,er rnusl be cal)p prr
NO I .
I—] OTHM _
..._
YES
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE?
�..
Scope of work proposed: New SFR
6aseir:e;it
Garage: 1st Floor Al 4
ist Floor Square Footage: Building: 600 or�:�� 39.-------- 2nd Flcor�_�_
2nd Floor 8 4 9
Attic Deck(s):
Plan Review Fee Permit Fee
Surcharge Total Fees
Valuation
��g b low
'icat:on shall exp:te by IintitaGon, and plans and other data
PP:; r cant or destroyed by the building offcial. The bu tiling offiaal may extend the time
A caiicn .o. v:i:ich no permit is issued within 100 days to!Vaing the date o app.'
submitted for revie:v may thereafter be returned to the app.; int, showing that circumstances beyond the control of
for action by t!le a!*:cant for a period not exceeding 100 days on request by the app''
the app!i�nt have prevented action from being taken. No applicant S11a11 be extended v m feeOye t'lan o„cn to order to renew action on an
aoo'ication after exp;lation, the appl•cant shad resubmit pans and pay
(Print)
Applicant's Signature
Rev. Oct 2308
Date
(Continued on back)
Site Address:
RESIDENTIAL SITE PLAN QUESTI0NNAIRE
3625 Reagan Ave.
2. Are any areas being developed on the site within 200 feet of the shoreline? Yes No
NOTE: If yes, please fill out a Shoreline Permit Submittal Checklist (WAC 173-27-180)
CRITICAL AREA CHECKLIST:
3. Slope is calculated by dividing the vertical
distance by the horizontal distance and then
multiplying the result by 100. Example:
Vertical
Distance = 20'
Horizontal
Distance = 100'
Vertical 20 feet
Horizontal 100 feet =.2 X 100 = 20% slope
Check all that apply to the site and areas within 200 feet of the
site.
4/ Flat: less than 5 -feet elevation change over entire site.
Rolling: slopes on site generally less than 15%.
Hilly: slopes present on site of more than 15% and
less than 30%.
Steep: grades of greater than 30% present on site.
Other (please describe):
4. Does the site or properties within 200 feet of the site contain areas of standing water, creek or an area
where water flows across the ground surface? Yes 0
5. is there an apparent wetland present on the site or on properties within 200 feet of the site? ees)No
RESIDENTIAL DEVELOPMENT WORKSHEET:
6. What is the amount of grading proposed (in cubic yards), not including foundation area?
Fill amount_____ Curt amount _ Total grading SS I-04HS vIN//Jl•
NOTE: Grading over 50 cubic yards requires a separate permit.
Will the grading material be imported or exported? Yes / No
7. Please provide the following infonnation. The setbacks are measured from the finished exterior wall
of a structure to the lot line, not from the foundation. Accurately represent your setbacks on site plan.
DESCRIPTION I
PROPOSED
Front yard setback
10,
Rear yard setback*
r
Side yard setback
f'
Side yard setback
Maximum height
39
Development coverage*
3Y.
Number of off-street
parking spaces
Residential Questionnaire
*Use this as the second front yard setback
for corner lots and through lots.
"*Development Coverage is defined as
that portion of a lot covered by impervious
surface areas of all structures, and
impervious paved areas, such as
driveways and walkways.
Revision: October 2008
HT
!r b b
i9 iD W
<
<MuIM)or
rn?om�
4` E Z
1�- b
N
1
LO
mun-n
`° m
m o. o
om
m
ac
CD CD
0
Z
N
am 3
r
D
w3�
C
N
(� O
¢ 3
1
LO
nermit Center
{'t
Dept. or Community Development
345.0th Street, Suite 600�BremertonYWA'9$337-1$73
WHOLE HOUSE VENTILATION USING THE PRESCRIPTIVE METHOD IN 2009 IRC
Purpose: We have all heard about office and school buildings which cause people to become ill. If improperly ventilated, our
homes can cause some of us to become ill too. With all of the new materials we use to construct and furnish our buildings,
it is very important that out, ITc)mes are ventilated in such a way as to provide us With a rnethed to get the stale air out and
fresh air in.
Please SII be the using, aand fill in any blanks or boxes under the which of the e system yur o prescriptiveWholeHouse ventilation Systems you
w
Choose -
option 1. !k'hole house Ventilation Using Exhaust Fans (IRC Section M1508))
0 7,5_ CF 11 Exhaust Fan Flovi Rating Per fable M1506.2 (attached). Location of whole house exhaust fans) must lie shown on the
plans.
m Fan Gbntrols: 24 hour r,;or..k time: with capahility of continuous operation, manual and automatic control & accessib!e
® kgho!ehouse f -+;s (crated 4 feet or less from ilio interior yriI , shall have a sone rating of 1.5 or less at 0.1 inches vJ-g
Outdoor Air shall 0 distributed to each habitable room by individual nut door Air inlets.
ExreE)trnn; Exhaust only ventilation gstenis do not require outdoor air inlets if the home teas Fa ducted forced air heating system that
co;rrn:uiicatea with ail habitel)le rooms and tile interior doors are undowtd a Iliiniliiui'i! uf'/, inch.
Option 2. .lrfwle house Ventilation integratod with a Forced Ail' Heating System (IRC Section fvi15�J3.:3.1)
(_ r: `t1,t3.2. (attached)
inch f=resh air duct, coruiectea 0.o tho furnace rettnrl o'enunl, sized Fier i ab.e t.11 t,
e Brash Air inlet duct Dallli)er election: (Choose one)
%lotorized f)a:rper (no testir;g oi: venG!ation flow r��t:;s as lolig as tiT;: presrf iptivi Duct siziry per 'fabs f ;'i 508.u.2Jue !ref.
i'131.Urli D2.rni; r IlT:3etin[J !at+!^ 3 2 flo:: rates: --- _._--.Cf M (= t atteci;ed Table f11508.u.2.)
�� :\utcm.ifiC. I lc:v t r:gtile ted Device (Requires f!e'(i t. sting u!' calcir:'ation,)
o C�ill:(!iJ r A!!' inlets sliall be s-creenecl UrGi,rF f :'11SB froiected froill (sntry !)y l ave3 Or Othf.'r niatteridl and located
o
All Vnni latnn 5 )L)ly (li.i s Ill the CCtli'ilt+011Cd space 00t) !IlsUldted to d f lllllllllLl(lT OF t�' t
()ptlot'i 3. Vihoie hOUse Ventilation Using a Supply Fan (litc Section W1 SOH)
0 _ inc!I outcoor air inlet dura; connect(ld to the furnace supl)ly ail stream, sized per i'ab!e %14r,08.6.2. (attached)
o Fresh Air inlet duct Liar, -draft f)2.11lpef Selection: (Choose one)
Cal hreitt::i nmantlal voiurna dan,per fllstaL'ecl and set to meet tfie pleasured flo.v rates in fable 3 2 (alhclTact) by field lesliny :villi J+
pri;su,e y_auae and/cr fcliov.,ing maritil t trot's Prista!latinn irlstruGtior:.
(� A rnailL131 volume damper insta!le l and set to ritee.t the nleasurtad Now rates sf,ecihed in fai)!e tai Oti.6.2.by ft:d testiflq V-'itll a flow
t'.0CJ a; fi;,v: rtleas!!rirut station.
( An aLit0 :liatiC f!GPJ-,CCL device; 5''70..0 to (ila sp2oficd fio'r.' rate if) T(abl@ I 1 i JU$.t7.2.t'JIl CIi )rovicies constant. flow over a t)ressuW
L 0.
range of 0,20 to 0.bO inches :vater gauge.
o O rtdoGr /Lir roles shall oe sr.!eened or otiiC!'.ise protected frGlrl entry by I�'iive5 Ur' ether nlatarial and located
® A!i Ve+Ti:!ation -CLI Jpiy dliCtS if) tyle COnditiu;— d Sl;a4e Shalll ^ (n5ll!atetl Wii I11 Ili1lTUrn Of tt'
r0j)tion 4
a
At; auct'::v:k in t:cat ;ccoveiy syste.. shall be at least 6 inci!es Ill diameter
o !3alanc!ng ciantpers si)a!i he !nstai:ed on lhi� in!et and P.xiiatlSt side.
a Flo:v m.easurs;r:ent grids Shall be installed on the supply and return.
o System, m'nimurrr flo'.v rating shall not t)a fess than Specified in Table 1`91500.6.2.
o Outdoor air inlets shall bs screanec! or otiteraiso protected from entry by leaves or outer material and located
Ventilatton supply Ducts in the conditioned space upstream of the heat exchanger shell be insulated to a mininitnn of R-4
VJfl()le ilousi; ventilation Using a Float Recov'M Ventilatiot) Syst('In
THE FOLLOWINU ARE REQUIRED IN ADDITION TO THE OPTION CHOSEN:
® At tl),� tune Of Iinal insl)actian, the autOrnatic control time shall ue set to Op('rate the in g i fstn fa- at (east 8 Hours per day,
o A label sera!! tae affixed to the coinlrol that reads "Whole House Ventilation" (see operating iristructinns)
,• t and autornatic control, readily accessible.
r��tion rn�,r,r. a a d
e 24 --hour dock tuner installed with capability of continuOrrs Op
e f
c installer shall provide the manufacturer`s installation, Operating instructions, and a who'U house v�rlti!atior, system Operation dr scription!
REFERENCE TABLES
Table M1508,2 Whole Hous'~ Ventilation
Minimum Ventilation Rates:
Continuously erated Systems) cfm _.._.
_.__ Number of Bedrooms
' 7
1 ;�Irjor Brea (ft-) 0-1� 2.•3 _ �l_5 6-7 r;
t - 60 _.-. �. �•5 D
F ;1500 -
_,.. �-7a 90 105
i01�- 60
10a�+�, �0
3001 - 4500
!- 75 - 90 •105 '120
- 0000
1-1501 90 -�10a120 �135150
105 12C 135 15U _ 1a5
./300 _.-
'fable M1508,6.2 Prescriptiveirl Sup iy Fan Dint Sizing._...
Supply Fan Tested CFM at 0.40" mg.
Si)e:,ifi�d minimur>7 S___ titooth iVlinimun� F!c.xifile
Vglur.ne from t3uct Diameter Duct Diameter
4- irlCit �� 5 irir;il
j 50 -`aa Cf ill
90-i_;0 cfal _ , ii1chh irlcil
f �? 50w250 cfrn .0 i>ch_ _ I lrlcfi i
fm ' 7 iilcfl _ 8 inch
PRESCRIPTIVE HEATING SYSTEM SIZING
All heat!ng eyuli;ment must bu sized using a recognized engineering practice. Typical sources include:
ASHRAE Handbook of Fundamentals.
• ACCA Manual J, 8,n Edition- Residential Load Calculation.
• ACCA Manual N- Commercial Load calculation.,,
lr,y�t,tnvv..ener<�p.edw'i;ode
,Prescriptive Energy Code -Compliance for Climate Zones 6, 5 and Marine 4
Project Information Contact Information
L2-1842 4R R a x
m s ,� air
;y
? 3 e g�
x ..+€y'.'
' 'ta v� g'�.a
This project will use the requirements of the Prescriptive Path below and incorporate the
the minimum values listed. In addition, based on the size of the structure, the appropriate
number of additional credits are checked as chosen by the permit applicant.
Authorized Representative
Date
Climate Zone
Fenestration U-Factorb
Skylight U -Factor
Glazed Fenestration SHGCb,e
Ceiling
Wood Frame Wall9,k,l
Mass Wall R -Value'
Floor
Below Grade Wall`,k
Slabs R Value & Depth
5 & Marine 4
R-Valuea U-Factora
6
R-Valuea
U-Factora
n/a 0.30
n/a
0.30
n/a 0.50
n/a
0.50
n/a n/a
n/a
n/a
49' 0.026
49
0.026
21 int 0.056
21+5ci
0.044
21/21" 0.056
21+5"
0.044
309 0.029
309
0.029
10/15/21 int + TB 0.042
10/15/21 int + TB
0.042
10, 2 ft n/a
10, 4 ft
n/a
"Table K4UZ.M and I able K4UL. 11..5 rOUIPULUb 111uluUtiu vi.i rave �.
Each dwelling unit in one and two-family dwellings and townhouses, as defined in Section 101.2 of'the
International.Residential Code shall comply with sufficient.options from Table R406.2 so as to achieve the
following minimum number of credits:
❑ 1. Small Dwelling Unit: 0.5 points
Dwelling units less than 1500 square feet in conditioned floor area with less than 300 square feet of
fenestration area. Additions to existing building that are less than 750 square feet of heated floor area.
2. Medium Dwelling Unit: 1.5 points
All dwelling units that are not included in #1 or #3, including additions over 750 square feet.
❑ 3. Large Dwelling Unit: 2.5 points
Dwelling units exceeding 5000 square feet of conditioned floor area.
Table R406.2 Summary
Option
Description
Credit(s)
1a
Efficient Building Envelope 1a
0.5
❑
lb
Efficient Building Envelope 1 b
1.0
❑
1c
Efficient Building Envelope 1c
2.0
❑
2a
Air Leakage Control and'; Efficient Ventilation 2a
0.5
p 0.5
2b
Air Leakage Control and Efficient Ventilation 2b
1.0
❑
2c
Air Leakage Control andi Efficient Ventilation 2c
1.5
❑
3a
High Efficiency HVAC 38
0.5
p 0.5
3b
High Efficiency HVAC 315
1.0
❑
3c
High Efficiency HVAC 3e
2.0
❑
3d
High Efficiency HVAC 3d
1.0
❑
4
High Efficiency HVAC Distribution System1.0
❑
5a
Efficient Water Heating
0.5
Q 0.5
5b
Efficient Water Heating +
1.5
❑
6
1 Renewable Electric Energy
0.5
`1200 kwh 0.0
Total Credits 1.50
*Please refer to Table R406.2 for complete option descriptions
http://www.energy.wsu.edu/Documents/2012`/`2ORes*/`2OEnergy.pdf
.Table R402.1.1 Footnotes
For Sl: 1 foot .= 304.8 mm, ci .ISI'; continuous insulation, int.= intermediate framing.
a R -values are minimums. U -factors and SHGC are maximums. When insulation is installed in a cavity which is
less than the label or design thickness of the insulation, the compressed R -value of the insulation from
Appendix Table A101.4 shall not be less than theR-value specified in the table.
b The fenestration U -factor column excludes skylights. The SHGC column applies.to all glazed fenestration.
Exception: Skylights may be excluded from glazed fenestration SHGC requirements in Climate Zones 1
through 3 where the SHGC for such skylights does not exceed 0.30.
"10/15/21.+TB" means R-10 �icontinuous insulation on the exterior of the wall; or R-15 on the continuous
insulation on the interior of the wall, or R-21.cavity insulation plus a thermal break between the slab and the
basement wall at the interior of the basement wall. "10/15/21.+TB" shall be permitted to be met with R-13
cavity insulation on the interior of the basement wall plus R-5 continuous insulation on the interior or
exterior of the wall. "10/13" means R-10 continuous insulation on the interior or exterior of the home or R-
13 cavity insulation at the interior of the basement wall. "TB" means thermal break between floor slab and
basement wall.
d R-10 continuous insulation is{required under heated slab on grade floors. See R402.2.9.1.
e There are no SHGC requirements in the Marine Zone.
f Basement wall insulation is not required in warm -humid locations as defined by Figure R301.1 and Table
R301.1.
g Reserved.
h First value is cavity insulation, second is continuous insulation or insulated siding, so "13.+5" means R-13
cavity insulation plus R-5 continuous insulation or insulated siding. If structural sheathing covers 40 percent
or less of the exterior, continuous insulation R -value shall be permitted to be reduced by no more than R-3
in the locations where structural sheathing is used to maintain a consistent total. sheathing thickness.
The second R -value applies w{hen more than half the insulation is on the interior, of the mass wall.
For single rafter- or joist -vaunted ceilings, the insulation may be reduced to R-38.
k Int. (intermediate framing) denotes standard framing 16 inches on center with headers. insulated with a
minimum of R-10 insulation.
Log and solid timber walls with a minimum average thickness of 3.5 inches are exempt from this insulation
requirement.
Table R402.1.3 Footnote
a Nonfenestration U -factors shall be obtained from measurement, calculation or an approved source or as
specified in Section 11402:1:3.
Glazing Schedule
Project Information. Contact Information
L2-1842-2
R402.3.3 Exception (15 sq. ft. max.)
Vertical Glazing (Windows and glazed doors)
Plan Component Glazing Width Height Glazing
Qt. Feet"ch Feet"°h Area UA
ee
ee
�e
ee01
•e$
�A
ee
.ee
ee
.ee
ee
.eeee
e
�A
ee
eee
ee
eee
ee
eee
ee
eee
ee
eee
ee
eee
ee
eee
ee
eoe
ee
eee
ee
eee
ee
eee
Mowee
Move
me
ee
eee
ee
ele
M=101
ee
eee
ee
eee
ee
eee
ee
eee
moffeee
ee
eee
ii I I
1 11
11
111
it 11
111
11
111
11
111
Sum of Area and UA 223.0 66.90
Area Weighted U = UA/Area 0.30
simple Heating System Size: Washin ton State
This heatin system sizingcalculator is based on the Prescri tive Re uirements of the 2012 Washin ton State Ener Code WSEC and ACCA
Manuals J and S. This calculator will calculate heatin loads onl .ACCA rocedures for sizing coolingsystems should be used to determine coolin
loads.
The glazing (window) and door portion of this calculator assumes the installed glazing and door products have an area weighted average U-factor of
0.30. The incorporated insulation requirements are the minimum prescriptive amounts specified by the 2012 WSEC.
Please fill out all of the green drop-downs and boxes that are applicable to your project. As you make selections in the drop-downs for each section,
some values will be calculated for you. If you do not see the selection you need in the drop-down options, please. call the WSU Energy Extension
Program at (360) 956-2042 for assistance
Contact Information
Project Information Too,
] 2 1912& a v� VSs k no M
Heating System Type:
O Forced Air Furnace O Heat Pump
To see detailed instructions for each section, place your cursor on the word "Instructions".
Design Temperature _ _._.46
Design Temperature Difference (DT)
Instructions 'r Indoor(70d� AT= Tees)-outdoorDesignTemp
Seattle Sea-Tac AP � 5,
Area of Building
Conditioned Floor Area
Instructions Conditioned Floor Area (sq ft)
Conditioned Volume
Average Ceiling Height
Instructions Average Ceiling Height (ft) � .. �8S 15,657
U-Factor X Area = UA
Glazina and Doors 66.90
Instructions 0.30. 223
InsulationU-Factor X Area = UA
Attic 0.026.849 22.07
Instructions x r R 49
U-Factor Area UA
Single Rafter or JiaL
VltCeilings yr ys ,1,
��r No selection .
Instructions
U-Factor Area
UA
Above Grade Walls (see Figure 100.63
0.056.,797
£:
Instructions R-21
U-Factor Area UA
Floors 0.029,.:6Q0 17.40
Instructions R-30
Below Grade Walls (see Figure+)` _ U-Factor Area UA
No selection.
Instructions Select R-value
(see Frgure +� F-Factor Length UA
Slab Below Grade
instructions
.� No selection
--
Selectconditoning '
Slab on Grade (see Figure l)
F-Factor Length UA
No selection �?
Instructions $elect R-Value
Locatiors of Ducts -- Duct Leakage Coefficient
�, _:
Instructions .
^Unconditioned Space �;f 1.10
Sum of UA 207.01
Envelope Heat Load 9,522 Btu I Hour
Sum of UA X AT
Figure 1 • Air Leakage Heat Load 7,778 Btu / Hour
VolumeX 0.6XATX.018
:..Above Grade -i
17,301 Btu /Hour
Building Design Heat Load
Air Leakage +Envelope Heat Loss
Building and Duct Heat Load 19,031 Btu I Hour
r Duds in unconditioned space: Sum of Building Heat Loss X 1.10
Ducts in conditioned space: Sum of Building Heat Loss X 1
Maximum Heat Equipment Output 26,643 Btu / Hour
Building and Dud Heat Loss X 1.40 for Forced Air Furnace
Building and Duct Heat Loss X 1.25 for Heat Pump
(07101113)
I
STRUCTURAL CALCULATIONS
FOR THE
HIGHMARK HOMES RESIDENTIAL PROJECT
Plan 1-2-1842-2
October 23, 2013
Job No.: 09-022
Location: Lot 6, Sylvan Way Meadows
Bremerton, Washington
SEGA Engineers,
Structural & Civil Consulting Engineers
22939 SE 292vd PL (360) 886-1017
Black Diamond, WA 98010
Copyright 2013, SEGA Engineers
STATEMENT OF WORK
SEGA Engineers was asked to provide a lateral loads analysis, shear wall
design, review of major framing members and foundation, and drawing red -lines
for a two-story wood framed single family residence. The roof framing is
manufactured trusses, the floor framing is 2x dimensional or wood 1 -joists, and
the foundation is typical concrete strip footings with a crawl space.
The application and use of these calculations is limited to a single site referenced
on the cover sheet. The cover sheet should have an original signature in blue ink
over the seal. The attached calculations may or may not apply to other sites and
the contractor assumes all responsibility and liability for sites not expressly
reviewed and approved. Please contact SEGA Engineers for use at other sites.
SEGA Engineers will use that degree of care and skill ordinarily exercised under
similar circumstances by members of the engineering profession in this local. No
other warranty, either expressed or implied is made in connection with our,
rending of professional services. For any dispute, claim, or action arising out of
this design, SEGA Engineers shall have liability limited to the amount of the total
fee received by SEGA. Engineers.
Questions regarding the attached should be addressed to SEGA Engineers.
Greg Thesenvitz, PE/SE
SEGA Engineers
SEGA Engineers/ ` . .
Structural & Civil Consulting Engineer`s
22939 SE 292nd PL (360) 886-1017
Black Diamond, WA 98010
Design Criteria
International Building Code (IBC), 2012
LOADS
Roof
DL
15 psi
LL
25 psf
Floor
DL
10 psf
LL
40 psf
Wind
Risk Category II .
Design Wind Speed 110 mph
KZt 1.00
Exposure B
Seismic
Design Category D
SDS - 1.00
Response Factor 6.5
Cs= 0.154
Importance Factor 1 1.00
Soil
Allowable Bearing 1,500 psf
Copyright 2013, SEGA Engineers
(Vult)
Project 1-2-1842
Job No. 09-022 By: GAT
Checked Date: 10/22/13 Sht i
SEGA Engineers,
Structural & Civil Consulting Engineers
22939 SE 292nd PL (360) 886-1617
Black Diamond, WA 98010
LOADS
ROOF
DL
LL
FLOOR
DL
LL
DECKS
DL
LL
WALLS
DL
Copyright 2009, SEGA Engineers
Project 1-2-1842
Job No. 09-022 By: GAT
Checked Date: 03/26/09 Sht 1
Roofing (Comp).
3.5 psf
'/2" OSB
1.8
2 x @ 24" .
3.5
Insulation
1.1
s/8" GWB
2.8
Misc.
1.6
14.2 psf
Snow, Pf
25 psf
(115% Load Duration)
Reduction, Cs
0.00
(Ct = 1.1)
8/12 pitch = 34 deg
Total Roof Load
39.2 psf
Flooring
0.5 psf
3/4' Plywood
2.3
11'/8' TJI @ 16" oc
2.5
e/8" GWB
2.8
Misc.
1.5
9.6 psf .
Residential
40 psf
Total Floor Load
49.6 psf
2 x Decking
4.3' psf
2x10@16"oc
2.8
Misc
1.5
8.6
Residential
40 psf
Total Deck Load
48.6 psf
Siding
3.5
'/Z' Plywood
11.5 psf
2x6@16"oc
1.7.
Insul
0.6
1/2" GWB
2.2
9.5 psf
SEGAErn ineersPROJECT z - g JZ_
Structural & Civil Consulting Engineers
JOB NO. —p'LZ_ FIGURED .BY C�
22939 SE.292nd Place - Black Diamond, Washington 98010 pA
(360) 886-1017 - Fax (360) 886-1016 CHECKED BY DATE SHEET Z,OF
UJ
Ir
SOpjv) t lob P`'� 13t-�z,(�SPs�') ` I�o►�o
z��� p �� 1 , `°,�' z) C �� �-,
� zed
V - 9-4
IL
u 7/15 rS L �--
�. >.. .
LI
,r-
w
fl,�S (o,S)��'�3t C7,IZ�3�)(le`)
Copyright 2009, SEGA Engineers
SEBA Engineers PROJECT
Structural & Civil Consulting Engineers
JOB NO. d� —OZZ, FIGURED BY
22939 SE 292nd Place
Black Diamond, Washington 98010 CHECKED BY DATE%.//3 SHEET 30F
(360) 886-1017
j - L1dJ)FA— rt. -.30t- L.Z-Cq*) -
�µs i3Y�• �- � tl-�z�4�t�ri
O
to
M
Z_ otP Grp
(Z���PS",
lAr
d�
3
rn�i
Copyright 2013, SEGA Engineers
SEGA Engineers
Structural & Civil Consulting Engineers .
22939 SE 292nd PL (360) 886-1017
Black Diamond, WA 98010
Project 1-2-1842
Job No. 09-022 By: GAT
Checked Date: 10/22/13 Sht.
LATERAL LOADS - (Alternate ASD)
SEISMIC
Maximum Base Shear, V = F SDS W Eq. 12.14-11
R.
where,
F = 1.1 Two -Story Building
SDs =1.00 SS = 1.5 Fa = 1.00 (Table 11.4-1, S5 > 1.25)
R = 6.5 Table 12.14-1
W = Seismic Weight
For W:
W.of= (24 ft)
( 37 ft )'(16 psf) +
(2) (34ft+ 37 ft
4.0 ft.) (9.5psf) = 20 kips
Wnoor= 24 ft)
(17ft) (14 psf)+
(2) (24ft+ 17ft)
(1.0ft) (9.5psf) = 6kips
Wn(,or = ( 24 ft)
( 37 ft) (14 psf) +
(2) (24 ft + 37 ft)
( 8.5 ft) ( 9.5 psf) = 22 kips
17.70 psf
P20 =
( 1.00)
W total = 48 kips
Design Base Shear, V =
( .169) (48 kip)
- 8.2 kip
( 1.00)
( 1.00 )
E= 8.2 kip
= 5.8 kip
P30 =
( 1.00)
1.4
-�
17.70 psf
WIND
( 1.05)
( 1.00 )
(17.7 psf) =
Design Wind Pressure, ps =
X Kn ps3o
Wind Loads Govern for Lateral Design - Side/Side
Eq. 28.6-1, Sect. 28.6.3
where,
X = 1.00
0 - 15 ft
Exposure B ..
Figure 28.6-1
= 1.00.
20 ft
= 1.00
25 ft
= 1.00
30 ft
= 1.05
35 ft
KZt = 1.00
(24 ft)
(10 ft)
(17.7 psf) + (28 ft) (5ft)
P30 = 17.7 psf
+
(24 ft)
110 mph
PO -15 =
( 1.00)
( 1.00 )
(17.7 psf) =
17.70 psf
P20 =
( 1.00)
( 1.00 )
(17.7 psf) =
17.70 psf
P25 =
( 1.00)
( 1.00 )
(17.7 psf) =
17.70 psf
P30 =
( 1.00)
( 1.00 )
(17.7 psf) =
17.70 psf
P35 =
( 1.05)
( 1.00 )
(17.7 psf) =
18.59 psf
Design Base Shear: (Wind)
Section 26.8
Figure 28.6-1 (ASD)
(x0.6= 10.62 psf)
(x0.6= 10.62 psf)
(x0.6= 10.62 psf)
(x0.6= 10.62psf)
(x0.6= 11.15psf)
VVb =
(24 ft)
(10 ft)
(17.7 psf) + (28 ft) (5ft)
(17.7 psf)
+
(24 ft)
(5ft)
(17.7 psf) + ('24 ft) (5ft)
(17.7 psf)
+
(24ft)
(2ft)
(18.6 psf)
=11.9x0.6 =7.1 kips
Vsis =
( 38 ft)
(10 ft)
(17.7 psf) + (38 ft) (5ft)
(17.7 psf)
+
(34 ft)
(5ft)
(17.7 psf) + (34ft) (5ft)
(17.7 psf)
+
( 14 ft)
(2 ft)
(18.6 psf)
=16.6 x 0.6 = 10.0 kips
Therefore,
Wind, Loads Govern for Lateral Design - Front/Back
Wind Loads Govern for Lateral Design - Side/Side
Copyright 2013, SEGA Engineers
SEGA Engineers PROJECT L z. z-
-Structural & Civil Consulting Engineers
JOB NO. o9 -o7 -L FIGURED BY C147-
22939 SE 292nd Place - Black Diamond, Washington 98010 - -
(360) 886-1017 - Fax (360) 886-1016 CHECKED BY DATEN71z'SHEET�OF
ti1 EAr &1V
qg7V WqLL
Uz`
(91,q1( Q'Of
1"i 1+ 7-0, 33IS
A1=1 too
L 11V
At--
Z�
36
3 A
P
Copyright 2009, SEGA Engineers
I . .
SEGA Engineers_j PROJECT
/Structural.& Civil Consulting Engineers
JOB NO. 0 VL- FIGURED BY
22939 SE 292nd Place - Black Diamond, Washington 98010
. Vk
(360) 886-1017 • Fax (360) 886-1016 CHECKED BY DATE -7/o ol SHEET (/OF
;Suez ��/�G� #� ; .
)4Fr
Djo�
1+ 7-
0
AS
P F- T -F.
-L4. -1 � r` es t
sTMin` FST
LS714rjld)lf
7
Oa
F
Aft
-,I .
... pL ILV-
OF= 4,rjjP 4. LAL)
FT
Copyright 2009, SEGA Engineers 4
,Kirz-4-
%47
SEGA Engineers .
PROJECT
Structural & Civil Consulting Engineers.
22939 SE 292nd Place • Black Diamond, Washington 98010 JOB NO.
(380) 888-1017 • FAX 888-1018
CHECKED BY
L2-18342-2
J-022 FIGURED BY GA
DATE 10/22/13 SHEET 'I OF
5NEAR WALL KEY PLAN
2 2
LSTA30 • IVR 4 fill -
3. SLODOW,
MAIN FLOOR
A=610 SQ FT
0
4 f
"FLOORA • 414 SQ Ff ;
5
i
N
N
�
v
v
N
-„-o
N 1>
05-
O O,
N O
O
m O
fD
CD d
C CD �_•
N
N
O
C1 a'
o m
3 n �_
3
O
= N
3 NM N
° v Q Q
O 3
G:' CD C
C O
0= 7 ai
WX
CL
CD
rnsv
w o °
a °
CO, Er.
CD
CDm
?
cr
CCD
_CD0
Cll '' O
CD
N O
En
SS
3
�
7 n (n
C 3
m CDCL N
CD
CD
O* CD
N (a
O. n CDD ID
S
co
B.cn
S
3.
o o CD
O
0
�
� ca (n ?
^
\CJ
CD
O
W
C7 m
3
n- ^
00
0
CD
^
m
O
sv
ZC/)
QS� .
N
CD
j.
0 3 O
03'
Nv CL
C)7. CD
0
-p
W 7 „x.
36
o
pA�m�
c
CD o
CL 3
o
Cfl Z N -s
CO O
-'=S`L
O
@
n
CD
3' CD N
CII c (n
Q) ' (DCn
w
0) (D S
O
N I
n- 00
C O
Q.
n
Cl) n 3
CS
CD
CD O 6
3 -- CD
N
(n
CD CD
CD
CD
° a m
m
fD
a
a) (a v
O
fll
O
CD (D S
!v C:
CD
M 7 CD
n
o
v
cn Iv_
'
v N. Q
3
a
CD
CD
7
N O
'+ '
m
m
CD
o
CD m
N
CD c_ Q
0
� N
O
N' 3
N
N
S
�(D (SD
N v
N
CD
S
N
O
n � Co
CD
cn
cQ
=c
CD
CD
WX
WX
Co
3.
O
CDm
m
co
co
co
N 'S
N
^
1G
^
\C!
^
\CJ
-. CD
O
W
�
p
o 27
O
O
O
O
on
c
co
@
O
@
oz
@W
o D
w
rn.
N S
p
N
O
_
w 0
O
O
O
0
!v C:
fU 6 CND
W
w
p
CD
N' 3
II
II;
II
N
cD w 3
N
O X
0
0 ow
?
C7
d
N
(a
CD Q
N N
Y
v.
's
Site Address:
IT C
RESIDENTIM,
wilding Permit Application
>nuutinitt 1)cvelcmnicut ' 3 ki blit Sircct Suite 600 " 131-anctlon " X11 '
(360) 17 5275) "jj Fax (;360) 1713-5278 " tttvtt.ci.ln'ctuertcttt.«a.us
Owner L ] colit1'f cto l• ; X A11111orize i Agent
3625 Reagan AVe.
To apply for a property address, contact Public Works at (360) 473-5270
aZoa 4
CONTRACTOR:Highmark Homes
OWNER:
Address: 16400 Southcenter Pkwv #21
ddress:
Cit ;State: Zi . u wi a, WA 98188
-iti, State. Zip:
License # & Ex . DatedIGHMHL904R7 1 2-27-
one #: --�-----------�--
Contact Name: Thomas Tollen 14
Authorized Agent Name: Mike Goral
Contact Phone iiorie #: 253 891 -4388
Address:1 6400 Southcenter Pkwy. #21
Entail adds mast@windermere. com
Cit , State, Zip. Tukwila WA 98188
Tax ID/Parcel #: 5565-000-006-0000
Phone #: {253) 255-5532
Sewer- (._ Septic
Email addres
17 --1 Np.vi Crmstruction F-1 Alteration []_ Addition
L _�.��-►N-E-W SINGLE-FAMILY RESIDENCE RESIDENTIAL REBUILD
1
NEW DUPLEX RESIDENTIAL ADDITION
�--•
NEW MANUFACTURED HOME �' RESIDENTIAL REPAIR
L_..1
t- NEW GARAGE/CARPORT NEW ACCESSORY BUILDING
t--� f Roof I Sections'
—� UEh1,OLITION _-___.8f lnterior �__� _sf Exterior" _ �sf f=oundation VVali"` _ _s
_ " Separate demolition permit and. fees required.
Contact Public Worics for sewer cap permit (473-5270). Settler must be capped priar to demolition permit issuance.
OTHER:
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE? YES Ej NO �x )
Scope of work proposed: New SFR
Square Footage: Building: 1st Floor 802 Basement Garage:
2nd Floor 1 01 1 other 12 8
Porch Deck(s):
1st Floor 384
2nd Floor
Valuation Plan Review Fee Permit Fee Surcharge Total Fees I
I
Application for iNhich no permit is issued within 180 days following the date of application shall expire by limitation: and plans and other data
submitted for review may thereafter be returned to the applicant or destroyed. by the building official. The building official may extend the time
for action by the applicant for a period not exceeding 180 days on request by the applicant, showing that circumstances beyond the control of
the applicant have prevented action from being taken. No app!icant shall be extended more than once. In order to renew action on an
application after expiration, the applicant shall resubmit plans and pay a new plan review fee.
10
Applicant's Signature (Print)
Rev. Oct 2098
Date
(Continued on back) .
0
-f
RESIDENTIAL SITE PLAN QUESTIONNAIRE
1. Site Address: 3625 Reagan Ave.
2. Are any areas being developed on the site xvithin 200 feet of the shoreline? Yes N
NOTE: If yes, please fill out a Shoreline Permit Submittal Checklist (WAC 173-27-180)
CRITICAL AREA CHECKLIST:
3. Slope is calculated by dividing the vertical
distance by the horizontal distance and then
multiplying the result by 100. Example:
Distance =20'
Hot"i `01111(11
Distance = 100'
Vertical: 20 feet
Horizontal 100 feet =.2 X 100 = 20% slope
Check all that apply to the site and areas within 200 feet of the
site.
Flat: less than 5 -feet elevation change over entire site.
l/ Rolling: slopes on site generally less than 15%.
_ Hilly: slopes present on site of more than 15% and
less than 30%.
Steep: grades of greater than 30% present on site.
Other (please describe):
4. Does the site or properties within 200 feet of the site contain areas of standing- water, creek or an area
where water flows across the ground surface? YesNo
5. Is there all appatent wetland present on the site or on properties within 200 feet of the site? G/No
RESIDENTIAL DEVELOPMENT WORKSIIEET:.
6. What is the amount of grading proposed (in cubic yards), not Including foundation area?
Fill amount__ Cut amount_ _ Total grading_4 ,-.3'J y -AIC -0e
NOTE: Grading over 50 cubic yards requires a separate permit.
Will the grading material be imported or exported? Yes,/No
7. Please provide the following information. Tlie setbacks are measured fi-om the finished exterior wall
of a structure to the lot line, not from the foundation. Accurately represent your setbacks on site plan.
DESC:RIPTI(-DN
PROPOSED
l ront vard setback
3'
Rear vard sctb".lcl;
S�(le Pard setback--
• - --
l_ Sulo -ard setback
--•—...--_._..
-77
i 1'l<1.l'illliilll 11eIS'llt
a
Dei elopment Covera<,e•: „
y5: 3
Number of off-street
part:in? simces
2
*Use this as the second front yard setback
for corner lots and through lots.
*'-Development Coverage is defined as
that portion of a lot covered by impervious
surface areas of all structures, and
impervious paved areas, such as
driveways and walkways.
Residential Questionnaire Revision: October 2008
91,
J:
I
T-
0
�
0
CNI
Q��
0
1
U.1
�z�
11
oLULu
tw
eta
}
Q
CA
U
O�O
PERMIT CENTER
Dept of Community Development*345 — 6`" Street Suite 600*Bremerton*WA*98337-1873
Mechanical EI . Plumbing
Type of Fuel: Ig Electric ❑ Gas ❑ Oil ❑ Propane
Occupancy: L-aResidential E Commercial
Site Address:
CONTRACTOR: Indoor Comfort Systems, Inc.
OWNER: Highmark Homes
Address: 118 Violet Meadows St. S.
Address: 16400 Southcenter Pkwy #210
City, State, Zip: Tacoma, WA 98444
City, State, Zip: Tukwila, WA 98188
License #: INDOOCS1230H
Phone # ( 253)891-4388
Contact Phone #: ( 253)539-1424
Tax ID/Parcel #:
NO. TYPE OF EQUIPMENT
NO. TYPE OF FIXTURE
AIR HANDLING UNIT >IO,000CFM
ATMOSPHERIC VACUUM BRKR 1-5
AIR HANDLING UNIT <10,000 CFM
ATMOSPHERIC VACUUM BRKR >5
BATH FAN AND/OR EXHAUST FAN
BACKFLOW DEVICE <=2"
CLASS I HOOD & DUCT SYSTEM
BACKFLOW DEVICE > 2"
CLASS 2 HOOD & DUCT SYSTEM
BUILDING SEWER
CLOTHES DRYER W/ EXHAUST
CLOTHES WASHER
COMMERCIAL FURNACE/DUCT
COMMERCIAL FLOOR DRAIN
COMM. FURNACE>100,000 BTUS
DISHWASHER
COMPRESSORS
DRAIN PIPE/VENT PIPE ALTERATION
COOK STOVE W/ EXHAUST
DRINKING FOUNTAIN
DUCT CHANGE W/O NEW FURNACE
FLOOR DRAIN
ELECTRIC FURNACE/HEAT PUMP
FLOOR SINK/INDIRECT WASTE
EVAPORATIVE COOLER
GREASE INTERCEPTOR
FIREPLACE -GAS OR GAS LOG INSERT
HOSE BIBBS
FIREPLACE -WOOD, OR WOODSTOVE
INDUSTRIAL SAND/OIL INTERCEPTOR
GAS WATER HEATER & VENT
LAWN SPRINKLER W/ BACKFLOW DEV.
GAS PIPING
ROOF DRAIN
MISCELLANEOUS MECHANICAL
SHAMPOO SINK W/ BACKFLOW DEVICE
NATURAL GAS FURNACE/DUCTING
SINK (LAV, KITCHEN, MOP OR BAR)
PROPANE FURNACE/DUCTING
SUMP PUMP
PROPANE TANK (<2000 GALLONS)
TUB AND/OR SHOWER UNIT
UNIT HEATER
WATER CLOSET AND/OR URINAL
OTHER:
OTHER
OTHER:
OTHER:
MECHANICAL FEES:
PLUMBING FEES:
TOTAL FEES:
M44ez Q/ zg
Applicant's Signature Date
&SASIC PLAN! CHECKLIST
Basic Plan System
Page 4 of 4
L �,r L, .rcvjvi - � l
Developer/Applicant Office Use Only
NAME Highmark Homes LLC PERMIT #
BASIC #BS1 200014 PLAN 1 81 3B CODE CYCLE
L2M-1813 Roof Elev B
Basic Approval Date: 12-14-12
This checklist accompanies your "Basic" permit issuance & approval for use.
This Basic permit may be used during the current code cycle and must be re-
established upon the adoption of new code edition.
For future submittals using your established basics, your submittal documents
will consist of the following:
✓ This Completed Checklist
✓ Completed Application
✓ 4 Site Pians showing location of structure on parcel
✓ Site Specific letter from Engineer of Record approving the use with original
seal & signature or blanket letter. Engineer's License Expires
Basic will need a new letter for the Basic Permit after this date.
✓ 2 Copies of approved basic plans
✓ 2 Copies of approved engineering calculations and structural pages
✓ 2 Copies of approved Energy Form
✓ 2 Copies of approved Mechanical & Plumbing forms
✓ Clearly identify all options to be used and cross off all options NOT used
✓ 2 copies of the Geotechnical Engineer Report if performed for the site
✓ Septic: 2 Copies of accepted site plan or concurrent review from Health
District
PERMIT CENTER
Dept of Community Development*345 - 6"' Street Suite 600*Bremerton* WA_*98337-1873
❑ Mechanical Plumbing
"Type of Fuel: 613lectric ❑ Gas ❑ Oil ❑ Propane
Occupancy: 99Residential ❑ Commercial
i
Site Address:
3625 Reagan Ave.
CONTRACTOR: Peltram Plumbing
OWNER: Higlunark Homes
_
Address: 1929 W. Valley Hwy. S.
Address: 16400 Southcenter Pkwy #210
City, State, Zip: Auburn, WA 98001
__ City, State, Zip: Tukwila, WA. 98188
License #:PELTRPI075DZ
Phone #, (253)891-4388
Contact Phone #: (23)891-8781
Tax ID/Parcel #: 5565-000-006-0000
ONTO.
�J--- TYPE OF EQUIPMENT
AIR HANDLING UNIT>10,000CFM
AIR HANDLING UNIT <10,000 CFM
NO.
TYPE OF FIXTURE
ATMOSPHERIC VACUUM BRKR 1-5
ATMOSPHERIC VACUUM BRKR>5
_
BATH FAN AND/OR EXHAUST FAN
BACKFLOW DEVICE <=2"
CLASS I HOOD & DUCT SYSTEM
BACKFLOW DEVICE > 2"
CLASS 2 HOOD &. DUCK' SYSTEM
BUILDING SEWER
CLOTHES DRYER W/ EXHAUST
/
CLOTHES WASHER
COMMERCIAL FURNACE/DUCT
COi11MERCIAL FLOOR DRAIN
_
COMM. FURNACE>I00,000 BTUS
COMPRESSORS
_
DISHWASHER
DRAIN PIPE/VENT PIPE ALTERATION
COOK STOVE W/ EXHAUST
DRINKING FOUNTAIN
_
I
DUCT CHANGE W/O NEW FURNACE
FLOOR DRAIN
-�
ELECTRIC FURNACE/HEAT PUMP
FLOOR SINK/INDIRECT WASTE
�^ _k EVAPORATIVE COOLER
FIREPLACE -GAS OR GAS LOG INSERT
FIREPLACE -WOOD, OR WOODSTOVE
V
;7
GREASE INTERCEPTOR
HOSE BIBBS
INDUSTRIAL SAND/OIL INTERCEPTOR
GAS WATER HEATER & VENT
LAWN SPRINKLER W/ BACKFLOW DEV.
_
GAS PIPING
ROOF DRAIN
L_
MISCELLANEOUS MECHANICAL
SHAMPOO SINK W/ BACKFLOW DEVICE
NATURAL GAS FURNACE/DUC'FI'NG___+
SINK (LAV, KITCHEN, MOP OR BAR)
_I
PROPANE FURNACE/DUCTING
PROPANE TANK (<2000 GALLONS)
UNIT HEATER
OTHER:
_ _ 3
3
SUMP PUMP
TUB AND/OR SHOWER UNIT
WATER CLOSET AND/OR URINAL
OTHER
OTHER:
OTHER:
r INIECIIAi\TICAL FEES: _
PLUMBING FEES: _
L TOTAL FEES:
ge
Applicant's Signature Date
ti
Ci of Bremerton
City . 'PERMIT NiJM13ER: BF14 00043
Fire Department DATE ISSUED: 03/1:012014
911 Park Avenue, Bremerton WA 98337 SITE ADDRESS: 3625 REAGAN AVE
(360) 473.5380 -.Fax: (360)473-5461
S R
ASSESSOR NUMBER: 5565-000-006-0000 ZONING: CITY
Name Phone Address Access Code
APPLICANT:HERDMAN PLUMBING LLC; 360-830;0991 PO BOX 4044 UJ WT,Q-N6PLZ
OWNER: HIGHMARKHOMES 'LLC
CONTRACTOR: HERDMAN PLUMBING LLC
LENDER:
SUBMITTED.
02/27/2014
VALUATION: $3,000.00
Pian Check
552,00
BID PRICE2.
580.00
State Surcharge.
54.50
TOTAL FEES:
S136.50
253.255.5532
360-830-1)997
APPROVED:
SILVERDALE,.WA 98383'
16400 SOUTUCENTER PKWY STE 210 JSNBP SVJTIO
TURWIL'A, WA 98188
P:O. BOX 40414 IIFU3E-BBGWD
SILVPDALE, WA 98383
Fire Sprinkler Permit 13
Sly R -Fire Sprinkler Sys
SFR -Fire Sprinkler System
Inspection Requests:
Fire Inspections (360)473-5386
PIRATION: 09/06/2014 STATUS: ISSUED
Itis the responsibility of the.permit holder to see the required inspect' ns are made: Failure tb'obtain' rquired inspections mny'result in stoppagtrof the work until such
time that the permit holder can susbstantiate to the, of 8remertan th thc.concealed'work meets ore xceeds code requirements: I. hereby certify that I have read and
examined this pertnitand know'thesamc to be fiat end cotrect: All pr visions of laws and ordinances governing this type of work will be complied with whether specified
licrein or not. The granting of a permit does not presume to giv t rity to vioWe.or cancel provisions of any State or local law regulating constriction or the perfonnance
of the construction.
r
SIGNATURE'OF'OWNER OR -AGENT:
PRINTED NAME:
DATE:
CONDITIONS
City of Brernerton's approval of this applleaiion`pertains only to the City's reguintory Jurisdictlon, and thus compliance with City regulations
does not necessarilrensure"compliance with federal or state laws.
Pritumiby - WaIr. Valerie ont 0311012014.12:44 PM
page I of 3
City of Bremerton
Fire Department
911 Park Avenue, Bremerton WA 90337
(360)473-5380 Fax: (360)473-5461
(FIRE -01) Life Snfcty,and.Fire.Protection systems shall comply with;
International Fire Code (IFC) with Appendix
International Building Code (IBC)
National Fire Protection Association (NEPA)
Bremerton Municipal Code (BMC)
Bremerton Roadway Standards
Bremerton Municipal Utilities
PERMIT NUMBER: BF14 00043
DATE ISSUED: 03/10/2014
Copies of ordinances can be found an the cities website at www:ei.brcmcrton.wa.us.
To contact the Bremerton Fire Marshal's office;
MikeSix at Micltacl:SixQa ci.bremerton.wa.us or (360) 473.5386
SITE ADDRESS: 3625 REAGAN AVE
All questions, to be binding, must be followed with an.email re-stating.thc question and must include:cither digital photos
and/or drawingsio show both existing conditions and proposed changes/alterations.
The inspection retains the right to make requirements not addressed.during plan review. In many cases the plan reviewer is
not given adequate information to address all issues. The onsite inspection allows for a true representation of the project.
All projects require a visible address during and after construction. Final fire inspection will not besigncd off without a valid
and usable address; Please contact the Public Works Department for address if need be, (360) 473-5337.
All projects are required to have fire extinguishers unless exempt by the installation of a fire sprinkler system with quick
response heads.
All violations of the code and referenced documents is a $125 fine per violation, Deviating from the approved plans is a
violation orthe Fire/Building code. Any revisions need to be approved by the Fire Marshal,
I. (FIRE-I3DA) A 13D compliant fire sprinkler system is required.
All Bathrooms required to.be covered unicss'specifically exempt. All balconies not waived during plan review are required to
be covered. A (ire sprinkler head is required within 4' of the top ofthe stove. Including all spaces with fuel -fired appliances,
No portion of the plan review or inspection process exempts the designer or installer from the specifics of Fire Code or NFPA
requirements, A bucket testis required.
Cover Inspection/Buckct test is done after all other trades have completed interior work; but justbeforethe insulation
inspection.
Final Inspection/Testing is.ONLY done when the residence is ?turn -key ready? to be occupied.
ALL PERMIT DOCUMENTS ARE REQUIRED TO REMAIN AT THE FIRE SPRINKLER RISER DURING THE
ENTIRE INSTALLATION, COPIES ARE'ACCEPTABLE.
10. (DCD-100 A separate electrical permit issued through Labor & Industries (L&1) Is required for any new, modified, repair, replacement,
service, maintenance, or temporary installations. Electrical work is,inspccted by L&I prior to cover and the Raining
inspection. Contact L&I at 360415.4000 or www.Ini,wa.gov. (RCW 19.211)
10. (DCD47) DCD: Reinspection Fee: All approved plans, the printed building permit, and the permit.inspection placard, are required Io be
on-site for inspection purposes, and work to be inspected shall be complete and ready for inspection. If an inspection is called
For and plans are not available on site, or the work is not ready for inspection, approval will not be granted. In addition, a re-
inspection fee will be charged and must be collected by the Department of Community Development prior to any further
inspections being performed or approvals granted.
10. (DCD-02) DCO: Validity of permit. The. issuance or granting of; permit shall not be construed to be a permit for, or an approval of, any
violation of -any of due provisions of the Washington Stntc Building code or ofany, other ordinance of Ute City of Bremerton.
Permits presuming to give authority to violate or cancel the provkions,of the Washington State Building code or other
ordinnnces,of the City or.Bremertonshall not be valid; The issuance ofa pcnriii based on construction documents and other
data.shall not prevenCthe building official front requiring the correction of errors in the construction documents and other
data, The building official is also authorized to prevent occupancy or use or,, structure where' in violation of the Washington
State Building code or ofany other ordinances ofthe City of Bremerton.
T__
M-0
Printed by:: Wolf, Valarie on: 03/1012014 12:44 PM
Page 2 ora
City of Bremerton
Fire Department
PERMIT NUMBER: BF14 00043
DATE ISSUED: 03/-10/2014
411 Park Avenue, Bremerton WA 98337 SIMADDRESS: 3625 REAGAN AVE
(360).473-5390 Fax: (360)473=5461.
mm ran mm
10. (DCD-01.) ASBESTOS•AND LEAD-BASED.PAINT:
ASBESTdS:Prior to performing ony renovation or demolition work, Puget Sound Clean Air Agency and Washington
Department of Labor and industries (L&I) regulations require an asbestos survey be performcd.to determine whether there are
asbestos -containing materials in the work area orstrueture. The asbestos survey must be conducted by and EPA -certified
(AHERA) building inspector (except renovation or owner -occupied single family residences),Formore information, please
contact Clean Air Agency through their web site at www.pscicannir.org or byphohe at 800-552-3565 or 206-3434800; The
L&I.web site can be round at www.Ini.wa.gov/TradesLicensing/LicensingReq/Asbestos/de(ault.asp,
LEAD-BASED PAINT: A contractor or person receiving compensation who is performing renovation, repairs or painting on
a residential building,or'a child -occupied facility builtbeforc 1978, must be and certified by an accredited training
provideri,nnd,registered as a Renovator by the Washington Stote•Dcpartmentof Com erce- Lcod-Based Point Program. For
further information please contact: The Department of Commerce website at: ,www.commerce.wa.gov/lead, or call: (360)
586 -LEAD (5723).
CONTRACTOR: A contractor9s registration issued by. Witshington.Statc Dept, of Labor & Industries is required for anyone
who contracts or submits bids for construction work; including new construction,,altcrations, mprairs, or anyone who consults
or superintends; improves, demolishes, develops residential:property for sale, or Mips? houses. Contact L & ].at (360)415-
4000 for information.
11. (DCD-50) Final'lnspcction Required: All building permits sholl have a final inspection performed and approved by the City of
Bremerton Department ofCommunity Development prior to permit expiration. The failuro,to. "request a finalinspection or
failure toobtain final approval prior to expiration may require a reactivation fee, or a new.pennit application, if marc than a
year has passed with no activity.
12. (DCD-14) DCD: Approved Plans, Engineering, Site Plan, Permit, and Conditions shall remain on site and be available for inspection,
Any changes to plans shall be approved before construction is performed, Architect or engineer of record shall approve (he
change befamsubmitting a revision. A revision is subject to a revision fee and additional fees for plan review and inspections.
13. (PCD -32) Changes to Plans, Any changes to plans.shall be approved bcron6 construction isperformcd: Architect or engineerof record
shall.approve.the change before submitting a revision. A revision1s' subject to a revision fee and additional rets for plan
review and -inspections.
M . -_
MNTMUM INSPECTIONS'RIQUIRED
To request an inspection, please -call (360) 473-5386.ond be sure to provide your permit nbmber,.nanic on permit, site address, contact phone
number, and inspection type.To register -far on-line inspection access, visit the City's website at www.ci,brcmcrtonnva.us.
Inspection
Description
FIRE- FLUSH
FIRE- Fire Sprinkler Flush
FIRE -HYDRO
FIRE - Fire'Sprinkler Hydrostatic Test
FIRE - FINAL
FIRE - Final. Inspection
FIRE -BUCKET
FIRE - BUCKET TEST
FIRE - COVER
FIRE- Fire Sprinklcr/Fire Alarm Cover
Printed;by : Wolf,: Vatare on;.o3/l0/2014 12:44 PM
Pugc 3 or 3