HomeMy WebLinkAbout4649
Contract Number:
Vendor:
Subject:
Department:
File Class:
Begin Date:
End Date:
Review Date:
Vault Date:
Comments:
4649
SOUND GLASS SALES INC
Window Replacement - Jarstad Aquatic Center
Parks
LEG 12-1
09/06/2007
12/31/2007
02/15/2009
01/01/2009
CONTRACT
The City of Bremerton ("City") and Sound Glass Sales, Inc. ("Contractor) enter into the following
agreement:
Witnesseth:
That in consideration of the terms and conditions contained herein and attached and made a part of this
agreement, the parties hereto covenant and agree as follows:
I. The Contractor shall perform all work and furnish all labor, tools, materials and equipment to
remove and replace the existing clearstory windows with aluminum storefront windows with
tempered, low-E, laminated glass and remove and replace four (4) 8'x2' skylights with domed,
obscured glazing as identified in the attached quotation dated 1/10/2007 include herein as
Attachment B. All work is to be performed at the Glenn J arstad Aquatic Center located at 50
Magnuson Way, Bremerton, Washington.
In consideration of the services provided pursuant to this Contract, the City shall compensate the
Contractor in the amount not to exceed $22,350.00 (plus WSST).
All work to be in accordance with and as described in the Special Provisions, which are
incorporated by reference herein as Attachment A.
All parties agree that the United States Housing and Urban Development (HUD) shall be and is
hereby, named as an expressed third party beneficiary of this Contract, with full rights as such.
This Contract is funded through a Community Development Block Grant and is subject to
HUD-4010, U.S. Department of Labor Davis-Bacon Wage Determinations. The form HUD-
4010, Davis-Bacon Wage Rates (Attachment C) are incorporated by reference herein.
Contractor shall begin work within ten (10) calendar days after the date that written Notice To
Proceed is issued to the Contractor. The Contractor shall complete the work no later than ninety
(90) calendar days from the date established in the NOTICE TO PROCEED from the City.
The Contractor shall provide and bear the expense for all equipment, tools, material and labor of
any sort whatsoever that may be required for the transfer of materials and for the completion of
work specified in this Contract and every part thereof, except such as are mentioned in the
specifications to be furnished by the City.
II. The City hereby promises and agrees with the Contractor to employ and does employ the
Contractor to provide the materials and to do and cause to be done the above described work
to complete and finish the same according to the Special Provisions (Attachment A), the
Quotation (Attachment B) and the terms and conditions contained in this agreement. The
Contractor shall invoice the City upon completion of the above described work. The City
shall pay the Contractor the invoiced amount subject to acceptance of the work by the City,
and the conditions of this Contract being met by the Contractor.
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
CONTRACT
(Page 2 of 4)
III. The Contractor for himself, and for his heirs, executors, administrators, successors, and assigns,
does hereby agree to fulfill the performance of all covenants herein contained upon the part of
the Contractor.
IV. It is further provided that no liability shall attach to the City of Bremerton by reason of entering
into this contract, except as expressly provided herein.
V. INDEMNIFICATION
The Contractor shall defend, indemnify and hold the City, its officers, officials, officials,
employees, agents, volunteers and assignees harmless from any and all claims, injuries,
damages, losses or suits, including all legal costs and attorneys fees, arising out of or in
connection with the performance of this Contract, except for injuries and damages caused by the
sole negligence of the City of Bremerton.
The City's inspection or acceptance of any of the Contractor's work when completed shall not
be grounds to avoid any of these covenants of indemnification.
Should a court of competent jurisdiction determine that this Contract is subject to RCW
4.24.115, then, in the event of liability for damages arising out of bodily injury to persons or
damages to property caused by or resulting from the concurrent negligence of the Contractor
and the City, its officers, officials, employees, agents and volunteers, the Contractor's liability
hereunder shall be only to the extent of the Contractor's negligence.
IT IS FURTHER SPECIFICALLY AND EXPRESSLY UNDERSTOOD THAT THE
INDEMNIFICATION PROVIDED HEREIN CONSTITUTES THE CONTRACTOR'S
WAIVER OF IMMUNITY UNDER INDUSTRIAL INSURANCE, TITLE 51 RCW, SOLELY
FOR THEPURPOSES OF THIS INDEMNIFICATION.
THE PARTIES FURTHER ACKNOWLEDGE THAT THEY HAVE MUTUALLY
NEGOTIATED THIS WAIVER.
The provisions of this section shall survive the expiration or termination of this Contract.
VI. INSURANCE
The Contractor shall procure and maintain, during the term of this contract and throughout the
specified term of maintenance, insurance of the types and the amounts described below against
claims for injuries to persons or damage to property that may arise from or in connection with
the performance of the work hereunder by the Contractor, its agents, representative, employees,
sub-consultants and/or subcontractors.
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
CONTRACT
(Page 3 of 4)
Before beginning work on the project described in this Contract, the Contractor shall provide a
Certificate of Insurance evidencing:
1. Automobile Liability insurance with limits no less than $1,000,000 combined single limit
per accident for bodily injury and property damage;
2. Commercial General Liability insurance written on an occurrence basis with limits no less
than $1,000,000 combined single limit per occurrence and general aggregate for personal
injury, bodily injury and property damage. Coverage shall include but not limited to: blanket
contractual; products/completed operations/broad form property damage; and employer's
liability; and
3. Excess Liability insurance with limits not less than $1,000,000 per occurrence and
aggregate.
The insurance must refer to the project name, project location and contain a brief description of
the project. Any payment of deductible or insured retention shall be the sole responsibility of
the Contractor.
The City, its officers, officials, employees, agents and volunteers shall be named as an
additional insured on the insurance policy, as respects work performed by or on behalf of the
Contractor and a copy of the endorsement naming the City as additional insured shall be
attached to the Certificate of Insurance.
The Contractor's insurance shall contain a clause stating that coverage shall apply separately to
each insured against whom claim is made or suit is brought, except with respect to the limits of
the insurer's liability.
The Contractor's insurance shall be primary insurance as respects the City, and the City shall be
given thirty (30) calendar days prior written notice by certified mail, return receipt requested, of
any cancellation, suspension or material change in coverage.
The City also reserves its unqualified right to require, at any time and for any reason, proof of
coverage in the form of a duplicate of the insurance policy with all endorsements as evidence of
coverage.
Proof of coverage shall be provided to the City of Bremerton in the form of a Certificate of
Insurance and shall include additional insured endorsements as evidenced of coverage. The City
of Bremerton also reserves its unqualified right to require, at any time and for any reason, proof
of coverage in the fonn of a duplicate of the insurance policy with all endorsements as evidence
of coverage.
Approval of required insurance is a condition precedent to the execution of this contract.
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
CONTRACT
(Page 4 of 4)
In witness whereof the parties hereto have caused this agreement to be executed the day and year first
hereinabove written.
~o~
Mayor
Contractor
~ ~~() ?~S 9ffk3 :t'l (
~~ ~-e-A-
By
Date
Cj-{; -07
Attest:
('A.U.l>J~~ r
.~ +-0 ~.......-..
ff
City Attorney
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
SPECIAL PROVISIONS
Attachment A
PART 1 - DEFINITION
Where the terms "City or Owner" appears in the Contract Documents it shall mean "City of
Bremerton" as represented by its authorized officers, employees, or agents acting as the duly
authorized representative for this Contract.
PART 2 - CONDITIONS
2-01 SCOPE OF WORK
INTENT OF THE CONTRACT
The scope of work includes, but is not limited to, providing all labor, materials, equipment
and related items necessary for the removal and replacement of the existing clearstory
windows with aluminum storefront windows with tempered, low-E, laminated glass and
removal and replacement of four (4) 8'x2' skylights with domed, obscured glazing. Work to
include all perimeter caulking and end dams, sub sill, flashing and head channels.
2-02 OPERATIONS AND STORAGE AREAS
All operations of the Contractor shall be confined to the Glenn J arstad Aquatic Center and
other areas authorized or approved by the City. The Contractor shall be liable for any and all
damages it causes.
The Contractor shall indemnify, defend and save harmless the City and employees from
liability of any kind or nature arising from any use, trespass or damage occasioned by its
operations on the premises of third persons.
PART 3 - CONTROL OF WORK
SUPERINTENDENTS, LABOR, AND EQUIPMENT OF CONTRACTOR
The Contractor will supervise and direct the work. The Contractor will be solely responsible
for and have control over the means, methods, techniques, sequences and procedures of
construction and for coordinating all portions of the work under contract, unless the contract
documents give other specific instructions concerning these matters.
The Contractor shall designate an agent who may be contacted in the event of any emergency
that may occur after working hours, on holidays, or weekends, or at any time during the
absence of the Contractor's work force. Said agent shall be available to personally attend to
and/or arrange for help to attend such emergencies within thirty (30) minutes of the time of
contact by the City.
CONTRACT (Between the City of Bremerton and Sound Glass Sales. Inc.)
PART 4 - LEGAL RELATIONS AND RESPONSIBILITIES TO THE PUBLIC
4-01 PERMITS & LICENSES
Any and all permits deemed necessary for the prosecution of the work shall be secured and
paid for by the City.
4-02 EMERGENCY PHONE NUMBERS
The Contractor shall supply to the City the names and phone numbers of responsible
personnel representing the Contractor and each subcontractor for the purpose of contacting
these individuals in the event of an emergency.
PART 5 - PROSECUTION AND PROGRESS
5-01 SUBCONTRACTING
The Contractor agrees that it is fully responsible to the City for the acts and omissions of its
agents (subcontractors, suppliers, etc.) and all persons either directly or indirectly employed
by them.
All agents shall be required by the General Contractor to comply with the terms and
conditions of the Contractor's contract.
Failure on the part of the Contractor to have all its agents comply with the provisions of this
Section shall constitute grounds for the City to rescind the award and/or terminate the
contract.
5-02 ASSIGNMENT
An assignment of all or any part of the work shall not relieve the original Contractor or
surety of responsibilities or obligations under the contract documents, including but not
limited to, the Contractor's responsibility for work, responsibility for injury or damage and
any Defend, Indemnity and Hold Harmless obligations regardless of whether these
responsibilities and obligations arose from the Contractor's or its agent's (or anyone either
directly or indirectly employed by either of them), acts or omissions, operations, negligence,
failure to prevent injury or damage, failure to take reasonable precautions or to exercise
sound engineering or construction practices in conducting its work.
5-03 TIME OF COMPLETION
The Contract in its entirety shall be completed ninety (90) calendar days from the written
Notice to Proceed. The Contract shall start within ten (10) working days after the date of the
"Notice to Proceed". Time lost in replacing improper work or material shall not furnish any
grounds to the Contractor for claiming an extension of time for the completion of the work
and shall not release the Contractor from damages or liabilities for failure to complete the
work within the time stipulated.
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
5-04 TERMINATION. The City may terminate this agreement without notice for good cause.
"Good cause" shall include, without limitation, anyone or more of the following events:
A. The Contractor's failure to supply sufficient skilled workers or suitable materials or
equipment.
B. The Contractor's failure to prosecute the work with such diligence as will ensure its
physical completion within the original physical completion time specified in this
Agreement and any extensions of time which may have been granted to the Contractor by
change order or otherwise.
C. The Contractor's failure to make full and prompt payment to subcontractors or for
material or labor.
D. The Contractor's disregard of federal, state or local laws, rules or regulations.
E. The Contractor's filing for bankruptcy or becoming adjudged bankrupt.
F. The Contractor disregards the authority ofthe City.
G. The Contractor performs work which deviates from the Contract, and neglects or refuses
to correct rejected work.
H. The Contractor's failure to provide continuous competent supervision.
1. The Contractor otherwise violates in any material way any provisions or requirements of
the contract.
If the City terminates this agreement for good cause, the Contractor shall not receive any
monies due under this agreement, if any, until the Contract work is completed.
PART 6 - SUBMITTALS
Submittals, as required by the City, shall be addressed to the City of Bremerton Department
of Parks & Recreation., 680 Lebo Boulevard, Washington 98310, and shall be submitted
prior to commencing with the work. Submittal data shall be fully sufficient in detail for
determination of compliance with the Contract Documents.
Approval of substitutions, shall not add to the Contract amount and all additional costs which
may result there from shall be solely the obligation of the Contractor.
The City is not precluded, by virtue of review and acceptance of approval, from obtaining a
credit for construction savings resulting from allowing conceSSIOns III
suppliers/manufacturers or materials therefore.
Submittal requirements, if other than stated in Specifications or indicated on Plans, shall
include, but not limited to the following:
A. Warrantees & Guarantees for workmanship and materials; and
B. Certified Payrolls (2-copies).
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
PART 7 - HOUSEKEEPING
7-01 DESCRIPTION
The Contractor shall be responsible for the removal and disposal of existing debris including
but not limited to, removed window & skylights, fasteners, etc. that is either specified or
required to complete the project in a workmanlike manner.
7-02 DISPOSAL METHODE - WASTE SITE
The debris in general, either directly or indirectly connected with this work, shall be hauled
to a waste site obtained and provided for by the Contractor. The area of work shall be clean
of all debris and turned over to the City in a workmanlike manner.
END OF SECTION
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
01/10/07 WED 12:37 FAX 3rlO 479 5011 SOl~ GLASS SALES INC
SOUND GLASS SALES INC. - BREMERTON
5102 AUTO CENTER WAY
BREMERTON, WA 98312
PH:360-479-6099 FAX:360-479-5011
Attachment B
SalesRep: TERRY
Bill To: 8592
BREMERTON PARKS AND REC.
50 MAGNUSON WAY
_ BREMERTON, W A 98312
Cust State Tax [0:
Cust Fed Tax [D:
Ship VIa:
Adv.Code: 1801
Fed Tax 10: 91-1195656
Quote: Q007190
Date: 1/10/2007
Time:
, ,
t:
P/04fo:
Taken By: TERRY
[nstaller:
,
'.
Sold To: B592
JARSTAD POOL
SAME
473-5376 FX: 473-5882
Qty Part Number DesQrlptlon Sell Total
1 MISC CLERESTORY WINDOWS AND SKYLlTES $22350.00 $22350.00
LABOR AND MATERIALS TO INSTALL U.S. ALUMINUM IT 451THERMAL BREAK ALUMINUM STOREFRONT WITH
TEMPERED LOW.E OVER CLEAR LAMINATED GLAZING, FRAME FIN[SH TO BE CLEAR ANOD[ZED. INCLUDES
SUBSILL AND FLASHING AND HEAD COMP CHANNELS, INCLUDES ALL PERIMETER CAULKING AND END DAMS.
REMOVE AND REPLACE 48/0 X 2/0 SKYLlTES WITH CRYSTALlTE DOME WITH WHITE OBSCURE GLAZING
EXCLUSIONS: final clean[ng, breakage by others. protection after installation, NFRC labels, permits, primary addictional
and non- contributory insurance ( 250.00 per addictional insured) per project aggregate insurance ( add 250.00 per
additional insured)
~
';
THANK YOU FOR THE OPPORTUNITY TO BID THIS PROJECT. ANY QUESTIONS PLEASE CALL 360-479-6099.
j:
f
Sub Total:
Tax:
$22350.00
$1922.10
C.O.D.
Total: $24272.10
-........4..,_._~.
SECTION IV
Attachment C
Form HUD - 4010
&
U.S. DEPARTMENT OF LABOR
DAVIS-BACON WAGE DETERMINATIONS
1. This Contract is subject to HUD-4010, u.s. Department of Labor Davis-Bacon Wage
Determinations and Washington State Prevailing Wage Rates. The highest wages ofthe two
(2) shall prevail. The form HUD-4010, and Davis-Bacon Wage Rates (Attachment A) and
Kitsap County's State Prevailing Wage Rates (Attachment B) are included in this Section IV.
2. This project is subject to meet Federal Labor Standards Provisions Davis-Bacon Wage laws
as explained in form HUD-4010 (attached). All work performed on the project will be
subject to the approved wage determination rates as per Attachment A. The Federal wage
rates can also be obtained electronically: htto://www.wdol.qov/dba.asox#O
The Contractor shall comply with such Wage Determinations and the Federal Labor
Standards Provisions as outlined in form HUD-4010.
The form HUD-4010 is also available at the HUD website:
http://www .hudclips.org/ sub nonhud/html/pdfforms/40 10. pdf
3. Any questions regarding the u.S. Department of Labor--Davis-Bacon Wage Determinations
should be addressed to the City of Bremerton Department of Community Development-
Community Development Block Grant Coordinator, at the Norm Dicks Government Center,
345 6th Street, Sixth Floor, Suite 600, Bremerton, Washington 98337-1873, or call (360) 473-
5211.
CONTRACT (Between the City of Bremerton and Sound Glass Sales, Inc.)
Toumeau, Westinghouse, Athye Wagon, Eucid Two and Four-Wheeled power tractor with trailer and
similar top-loaded equipment transporting material: Dump Trucks, side, end and bottom dump, including
semi-trucks and trains or combinations thereof with 16 yards to 30 yards capacity: Over 30 yards $.15 per
hour additional for each 10 yard increment; Explosive Truck (field mix) and similar equipment; Hyster
Operators (handling bulk loose aggregates); Lowbed and Heavy Duty Trailer; Road Oil Distributor Driver;
Spreader, Flaherty Transit mix used exclusively in heavy construction; Water Wagon and Tank Truck-3,000
gallons and over capacity
GROUP 2 - Bu111ifts, or similar equipment used in loading or unloading trucks, transporting materials on job
site; Dumpsters, and similar equipment, Toumorockers, Toumowagon, Tumotrailer, Cat. D.W. Series, Terra
Cobra, Le Toumeau, Westinghous, Athye wagon, Euclid two and four-wheeled power tractor with trailer
and similar top-loaded equipment transporting material, Dump trucks, side, end and bottom dump, including
semi-trucks and trains or combinations thereof with less than 16 yards capacity;
Flatbed: (Dual Rear Axle); Grease Truck, Fuel Truck, Greaser, Battery Service Man and/or Tire Service
Man; Leverman and loader at bunkers and batch plants; Oil tank transport; Scissor, Slurry Truck; Sno-Go
and similar equipment; Swampers; Straddler Carrier (Ross, Hyster) and similar equipment; Team Driver;
Tractor (small rubber-tired (when used within Teamster jurisdiction); Vacuum truck; Water Wagon and
Tank trucks-less than 3,000 gallons capacity; Winch truck; Wrecker, tow truck and similar equipment
GROUP 3 - Flatbed: single rear axle; Pickup sweeper, Pickup Truck (Adjust upward by $2.00 per hour for
onsite work)
GROUP 4 - Escort or pilot driver
GROUP 5 - Mechanic
WAGE DETERMINA nON APPEALS PROCESS
1.) Has there been an initial decision in the matter? This can be:
* an existing published wage determination
* a survey underlying a wage determination
* a Wage and Hour Division letter setting forth a position on a wage determination matter
* a conformance (additional classification and rate) ruling
On survey related matters, initial contact, including requests for summaries of surveys, should be with the
Wage and Hour Regional Office for the area in which the survey was conducted because those Regional
Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is
not satisfactory, then the process described in 2.)and 3.) should be followed.
With regard to any other matter not yet ripe for the formal process described here, initial contact should be
with the Branch of Construction Wage Determinations. Write to:
Branch of Construction Wage Determinations
Wage and Hour Division
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
* PLUM0631-001 06/0112007
MASON (NE SECTION), AND KITSAP COUNTIES
Rates Fringes
Plumbers and Pipefitters
All new construction, additions, and remodeling of commercial building projects
such as: cocktail lounges and taverns, professional buildings, medical clinics,
retail stores, hotels and motels, restaurants and fast food types, gasoline service
stations, and car washes where the plumbing and mechanical cost ofthe project is
less than $100,000...................................................................... ................................. $ 27.39........ 11.18
All other work where the plumbing and mechanical cost of the project is
$100,000 and over............................................ ........................................... ................. $ 34.90.... .... 15.32
* ROOF0054-001 06/0112006
CLALLAM, JEFFERSON, KING, KITSAP, MASON AND SNOHOMISH COUNTIES
Rates
Fringes
ROOFER, Including Built Up,
Composition and Single Ply ......................................................................................... $ 25.62........ 10.16
* TEAM0174-002 06/01/2006
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON, PACIFIC (Northofa
straight line made by extending the north boundary line ofWahkiakum County west to the Pacific Ocean),
PIERCE, SNOHOMISH AND THURSTON COUNTIES
Rates Fringes
Truck drivers:
ZONE A:
GROUP 1: ............................................................................................................... $ 27.64........ 11.98
GROUP 2: ... ........................................ ........................... .......... ............ ................... $ 27.06........ 11.98
GROUP 3: ............................................................................................................... $ 24.66 ....... 11.98
GROUP 4: ................................................................................................. .............. $ 20.41 .. ...... 11.98
GROUP 5: ............................................................................................................... $ 27.40 ....... 11.98
ZONE B (25-45 miles from center oflisted cities*): Add $.70 per hour to Zone A rates. ZONE C (over 45
miles from center oflisted cities*): Add $1.00 per hour to Zone A rates.
*Zone pay will be calculated from the city center ofthe following listed cities:
BELLINGHAM, CENTRALIA, RAYMOND, OLYMPIA, EVERETT, SHELTON, ANACORTES
BELLEVUE, SEATTLE, PORT ANGELES, MT. VERNON, KENT, TACOMA, PORT TOWNSEND
ABERDEEN,BREMERTON
TRUCK DRIVERS CLASSIFICATIONS
GROUP 1 -"A-frame or Hydralift" trucks and Boom trucks or similar equipment when "A" frame or
"Hydralift" and Boom truck or similar equipment is used; Buggymobile; Bulk Cement Tanker; Dumpsters
and similar equipment, Tournorockers, Tournowagon, Tournotrailer, Cat DW series, Terra Cobra, Le
Mudman; Mortarman and Hodcarrier; Nozzleman (concrete pump, green cutter when using combination of
high pressure air and water on concrete and rock, sandblast, gunite, shotcrete, water blaster, vacuum
blaster); Pavement Breaker; Pip Layer and Caulker; Pipe Pot Tender; Pipe Reliner (not insert type); Pipe
Wrapper; Power Jacks; Railroad Spike Puller-Power; Raker-Asphalt; Rivet Buster; Rodder; Sloper (over 20
ft); Spreader (concrete); Tamper and Similar electric, air and glas operated tool; Timber Person-sewer
(lagger shorer and cribber); Track Liner Power; Tugger Operator; Vibrator; Well Point Laborer
GROUP 5: Caisson Worker; Miner; Powderman; Re-Timberman; Hazardous Waste Worker (Level A).
LAB00238-00806/01/2007
* PAIN0005-001 07/01/2006
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON,
PIERCE, SNOHOMISH AND THURSTON COUNTIES
Rates Fringes
PAINTER.......................................................................................... .... ............. .......... $ 19.46 ....... 6.82
P AIN0005-003 07/01/2006
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON,
PIERCE, SNOHOMISH AND THURSTON COUNTIES
Rates Fringes
DRYWALL FINISHER/TAPER........ .............. .................... ............. .......................... $ 28.61 ........ 12.53
* PAIN0188-001 07/0112007
CLALLAM, JEFFERSON, KING, KITSAP, LEWIS, MASON, PIERCE,
SNOHOMISH, THURSTON COUNTIES
Rates Fringes
GLAZIER..................................................................................................................... $ 32.87........ 10.89
* PAIN1238-001 09/01/2006
KING, KITSAP AND SNOHOMISH COUNTIES
Rates Fringes
FLOOR LAYER: CARPET/SOFT
FLOOR.......................... ................................ ......... ................ ...................................... $ 23.13........ 10.73
PLAS0528-00206/01/2007
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON,
PACIFIC, PIERCE, SNOHOMISH AND THURSTON COUNTIES
Rates Fringes
CEMENT MASON/CONCRETE FINISHER............................................................. $ 32.69 ....... 11.89
2. Projects ofless than $1 million where no building is involved. Surfacing and paving included, but
utilities excluded.
3. Marine projects (docks, wharfs, etc.) less than $150,000.
ENGI0370-008 06/0112007
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON, PACIFIC
(North of a straight line made by extending the north boundary of Wahkiakum County west to
the Pacific Ocean), PIERCE, SNOHOMISH AND THURSTON COUNTIES ZONE 1:
GROUP 1 ............................................................................................................... $ 20.25........ 8.26
GROUP 2 ........ ....................................................................................................... $ 22.81 ........ 8.26
GROUP 3 ............................................................................................................... $ 28.04........ 8.26
GROUP 4 ............................................................................................................... $ 28.55........ 8.26
GROUP 5 ............................................................................................................... $ 29.00........ 8.26
ZONE DIFFERENTIAL (ADD TO ZONE 1 RATES):
ZONE 2 - $ .70
ZONE 3 - $1.00
BASE POINTS: BELLINGHAM, MT. VERNON, EVERETT, SEATTLE, KENT, TACOMA, OLYMPIA,
CENTRALIA, ABERDEEN, SHELTON, PT. TOWNSEND, PT. ANGELES, AND BREMERTON
ZONE 1 - Projects within 25 radius miles ofthe respective city hall
ZONE 2 - More than 25 but less than 45 radius miles from the respective city hall
ZONE 3 - More than 45 radius miles from the respective city hall
LABORERS CLASSIFICATIONS
GROUP 1: Landscaping and Planting; Watchman; Window Washer/Cleaner (detail clean-up, such as but
not limited to cleaning floors, ceilings, walls, windows, etc., prior to final acceptance by the owner)
GROUP 2: Batch Weighman; Crusher Feeder; Fence Laborer; Flagman; Pilot Car
GROUP 3: General Laborer; Air, Gas, or Electric Vibrating Screed; Asbestos Abatement Laborer; Ballast
Regulator Machine; Brush Cutter; Brush Hog Feeder; Burner; Carpenter Tender; Cement Finisher Tender;
Change House or Dry Shack; Chipping Gun (under 30 lbs.); Choker Setter; Chuck Tender; Clean-up
Laborer; Concrete Form Stripper; Curing Laborer; Demolition (wrecking and moving including charred
material); Ditch Digger; Dump Person; Fine Graders; Firewatch; Form Setter; Gabian Basket Builders;
Grout Machine Tender; Grinders; Guardrail Erector; Hazardous Waste Worker (Level C); Maintenance
Person; Material Yard Person; Pot Tender; Rip Rap Person; Riggers; Scale Person; Sloper Sprayer; Signal
Person; Stock Piler; Stake Hopper; Toolroom Man (at job site); Topper-Tailer; Track Laborer; Truck
Spotter; Vinyl Seamer
GROUP 4: Cement Dumper-Paving; Chipping Gun (over 30 lbs.); Clary Power Spreader; Concrete
Dumper/Chute Operator; Concrete Saw Operator; Drill Operator (hydraulic, diamond, aiartrac); Faller and
Bucker Chain Saw; Grade Checker and Transit Person; Groutmen (pressure) including post tension beams;
Hazardous Waste Worker (Level B); High Scaler; Jackhammer; Laserbeam Operator; Manhole Builder-
GROUP lAAA - Cranes-over 300 tons, or 300 ft of boom (including jib with attachments)
GROUP lAA - Cranes 200 to 300 tons, or 250 ft of boom (including jib with attachments); Tower crane
over 175 ft in height, base to boom
GROUP lA - Cranes, 100 tons thru 199 tons, or 150 ft of boom (including jib with attachments);
Crane-overhead, bridge type, 100 tons and over; Tower crane up to 175 ft in height base to boom; Loaders-
overhead, 8 yards and over; Shovels, excavator, backhoes-6 yards and over with attachments
GROUP 1 - Cableway; Cranes 45 tons thru 99 tons, under 150 ft of boom (including jib with attachments);
Crane-overhead, bridge type, 45 tons thru 99 tons; Derricks on building work; Excavator, shovel, backhoes
over 3 yards and under 6 yards; Hard tail end dump articulating off-road equipment 45 yards and over;
Loader- overhead 6 yards to, but not including 8 yards; Mucking machine, mole, tunnel, drill and/or shield;
Quad 9, HD 41, D-lO; Remote control operator on rubber tired earth moving equipment; Rollagon;
Scrapers-self propelled 45 yards and over; Slipform pavers; Transporters, all truck or track type
GROUP 2 - Barrier machine (zipper); Batch Plant Operaor-Concrete; Bump Cutter; Cranes, 20 tons thru 44
tons with attachments; Crane-overhead, bridge type-20 tons through 44 tons; Chipper; Concrete Pump-truck
mount with boom attachment; Crusher; Deck Engineer/Deck Winches (power); Drilling machine;
Excavator, shovel, backhoe-3yards and under; Finishing Machine, Bidwell, Gamaco and similar equipment;
Guardrail punch; Horizontal/directional drill operator; Loaders-overhead under 6 yards; Loaders-plant feed;
Locomotives-all; Mechanics-all; Mixers-asphalt plant; Motor patrol graders-finishing; Piledriver (other than
crane mount); Roto-mill,roto-grinder; Screedman, spreader, topside operator-Blaw Knox, Cedar Rapids,
Jaeger, Caterpillar, Barbar Green; Scraper-self propelled, hard tail end dump, articulating off-road
equipment-under 45 yards; Sub grade trimmer; Tractors, backhoes-over 75 hp; Transfer material service
machine-shuttle buggy, blaw knox-roadtec; Truck crane oiler/driver-l 00 tons and over; Truck Mount
portable conveyor; Yo Yo Pay dozer
GROUP 3 - Conveyors; Cranes-thru 19 tons with attachments; A-frame crane over 10 tons; Drill oilers-
auger type, truck or crane mount; Dozers-D-9 and under; Forklift-3000 lbs. and over with attachments;
Horizontal/directional drill locator; Outside hoists-(elevators and manlifts), air tuggers, strato tower bucket
elevators; Hydralifts/boom trucks over 10 tons; Loader-elevating type, belt; Motor patrol grader-
nonfinishing; Plant oiler- asphalt, crusher; Pumps-concrete; Roller, plant mix or multi-lift materials;
Saws-concrete; Scrpers-concrete and carry-all; Service engineer-equipment; Trenching machines; Truck
Crane Oiler/Driver under 100 tons; Tractors, backhoe 75 hp and under
GROUP 4 - Assistant Engineer; Bobcat; Brooms; Compressor; Concrete finish mahine-Iaser screed;
Cranes-A frame-l 0 tons and under; Elevator and Manlift-permanent or shaft type; Gradechecker, Stakehop;
Forklifts under 3000 lbs. with attachments; Hydralifts/boom trucks, 10 tons and under; Oil distributors,
blower distribution and mulch seeding operator; Pavement breaker; Posthole digger, mechanical; Power
plant; Pumps, water; Rigger and Bellman; Roller-other than plant mix; Wheel Tractors, farmall type;
Shotcrete/gunite equipment operator
Category B Projects: 95% of the basic hourly reate for each group plus full fringe benefits applicable to
category A projects shall apply to the following projects. A Reduced rates may be paid on the following:
1. Projects involving work on structures such as buildings and bridges whose total value is less than $1.5
million excluding mechanical, electrical, and utility portions of the contract.
Aberdeen-Hoquiam, Tacoma, Wenatchee., Ellensburg, Everett, Port Angeles, Centralia, Mount Vernon
Sunnyside, Chelan, Pt. Townsend
Zone Pay:
0-25 radius miles Free
26-35 radius miles $1.00/hour
36-45 radius miles $1.15/hour
46-55 radius miles $1.35/hour
Over 55 radius miles $1.55/hour
(HOURLY ZONE PAY:WESTERN AND CENTRAL WASHINGTON-MILLWRIGHTS AND
PILEDRIVERS ONLY)
Hour Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center
Zone Pay:
o -25 radius miles
26-45 radius miles
Over 45 radius miles
Free
$ .70/hour
$1.50/hour
CHELAN (WEST OF THE 120TH MERIDIAN), CLALLAM, GRAYS HARBOR,
JEFFERSON, KING, KITSAP, KITTITAS, MASON AND SNOHOMISH COUNTIES
ON PROJECTS DESCRIBED IN FOOTNOTE A BELOW, THE RATE FOR EACH
GROUP SHALL BE 95% OF THE BASE RATE PLUS FULL FRINGE BENEFITS.
ON ALL OTHER WORK, THE FOLLOWING RATES APPLY.
Zone 1 (0-25 radius miles):
Rates Fringes
Power equipment operators:
Group 1 A.......................... .............................. ........... ....................... ............. ......... $ 33.21 ........ 12.75
Group 1 AA................. ......... ............................................. ...................................... $ 33.78........ 12.75
Group 1 AAA ...................................... .................................................................... $ 34.34........ 12.75
Group 1 ................................................................................................................... $ 32.66........ 12.75
Group 2 ................................................................................................................... $ 32.1 7........ 12.75
Group 3 ................................................................................................................... $ 3 1.75 ....... 12.75
Group 4 ................................................................................................................... $ 29.39 ....... 12.75
Zone Differential (Add to Zone 1 rates):
Zone 2 (26-45 radius miles) - $ .70
Zone 3 (Over 45 radius miles) - $1.00
BASEPOINTS: Aberdeen, Bellingham, Bremerton, Everett, Kent, Mount Vernon, Port Angeles,
Port Townsend, Seattle, Shelton, Wenatchee, Yakima
POWER EQUIPMENT OPERATORS CLASSIFICATIONS
o -25 radius miles Free
26-35 radius miles $1.00/hour
36-45 radius miles $1.15/hour
46-55 radius miles $1.35/hour
Over 55 radius miles $1.55/hour
(HOURLY ZONE PAY:WESTERN AND CENTRAL WASHINGTON-MILLWRIGHTS
AND PILEDRIVERS ONLY)
Hour Zone Pay shall be computed from Seattle Union Hall,
Tacoma City center, and Everett City center
Zone Pay:
o -25 radius miles
26-45 radius miles
Over 45 radius miles
Free
$ .70/hour
$1.50/hour
Millwrights and Piledrivers who reside in Aberdeen, Bellingham, Port Angeles, Mount Vernon, Olympia,
Wenatchee, or Yakima Local Union jurisdication areas, working on jobs in their respective area, shall have
their Zone Pay measured from their respective city center
CARP0770-00706/0112006
Rates Fringes
Carpenters:
WESTERN WASHINGTON:
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS,
MASON, PACIFIC, (NORTH), PIERCE, SNOHOMISH
AND THURSTON COUNTIES ACOUSTICAL WORKERS......... .......................... $ 30.50........ 10.93
BRIDGE, DOCK & WHARF CARPENTERS................. .......................................... $ 30.34........ 10.93
CARPENTERS AND DRYWALL APPLICATORS.................................................. $ 30.34........ 10.93
CARPENTERS ON CREOSOTE MATERIAL............. ................... .......................... $ 30.44........ 10.93
D IVERS TENDER...................................................................................................... $ 33.29........ 10.93
DIVERS....................................................................................................................... $ 74.82........ 10.93
INSULATION APPLICATORS .................................................................................. $ 30.34........ 10.93
MILLWRIGHT AND MACHINE ERECTORS ......................................................... $ 31.34........ 10.93
PILEDRIVER, DRIVING, PULLING, CUTTING, PLACING COLLARS,
SETTING, WELDING OR CRESOTE TREATED MATERIAL, ALL PILING ...... $ 30.54........ 10.93
SA WFILERS, STATIONARY POWER SAW OPERATORS,
FLOOR FINISHER, FLOOR LA YER, SHINGLER, FLOOR SANDER
OPERATORS OF OTHER STATIONARY WOOD WORKING TOOLS................ $ 30.47........ 10.93
(HOURLY ZONE PAY:WESTERN WASHINGTON AND CENTRAL WASHINGTON CARPENTERS
ONL Y)
Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the
following listed cities:
Seattle, Olympia, Bellingham, Auburn, Bremerton, Anacortes, Renton, Shelton, Yakima,
SUMMARY OF U.S. DEPARTMENT OF LABOR
DA VIS- BACON WAGE DETERMINATIONS
Attachment C
Refer to: http://www . wdo 1. gov 1 dba. aaspx#O
General Decision Number: W A070002 08/0312007 W A2
Superseded General Decision Number: W'A20030002
State: Washington
Construction Type: Building
Counties: Chelan, Clallam, Grays Harbor, Jefferson, King,
Kitsap, Kittitas, Lewis, Mason, Pacific, Pierce, Snohomish and
Thurston Counties in Washington.
BUILDING CONSTRUCTION PROJECTS (does not include residential construction consisting of single
family homes and apartments up to and including 4 stories)
Rates
Fringes
Asbestos W orkers/Insulator (Includes application of all
insulating materials, protective coverings, coating and finishes
to all types of mechanical systems)............. .......... ....................................................... $ 33.83
10.85
BOIL0242-003 1010112006
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP, LEWIS, MASON,
PACIFIC (northern part), PIERCE, SNOHOMISH AND THURSTON COUNTIES
Rates Fringes
BRICKLAyER.......... ........ ............................................................................. ............. $ 32.16........ 11.59
BRW AOOOI-005 06/0112007
CLALLAM, GRAYS HARBOR, JEFFERSON, KING, KITSAP,LEWIS, MASON,
PACIFIC (NORTHERN HALF), PIERCE, THURSTON AND SNOHOMISH COUNTIES
Rates Fringes
Tile & Terrazzo Finisher....... ............... ....... ................................................... .............. $ 24.80........ 10.99
Tile & Terrazzo Worker.............................. .................................... ............. ................ $ 30.62........ 11.34
BRW A0003-001 06/0112007
(HOURLY ZONE P A Y:WESTERN WASHINGTON AND CENTRAL WASHINGTON
CARPENTERS ONLY)
Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the
following listed cities:
Seattle, Olympia, Bellingham, Auburn, Bremerton, Amlcortes, Renton, Shelton, Yakima,
Aberdeen-Hoquiam, Tacoma, Wenatchee, Ellensburg, Everett, Port Angdes, Centralia, Mount Vernon
Sunnyside, Chelan, Pt. Townsend
Zone Pay:
graph (1) of this paragraph, the contractor and any subcontractor
responsible therefor shall be liable for the unpaid wages. In addi-
tion, such contractor and subcontractor shall be liable to the United
States (in the case of work done under contract for the District of
Columbia or a territory, to such District or to such territory), for
liquidated damages. Such liquidated damages shall be computed
with respect to each individual laborer or mechanic, including
watchmen and guards, employed in violation of the clause set
forth in subparagraph (1) of this paragraph, in the sum of $10 for
each calendar day on which such individual was required or permit-
ted to work in excess of the standard workweek of 40 hours without
payment of the overtime wages required by the clause set forth in
sub paragraph (1) of this paragraph.
(3) Withholding for unpaid wages and liquidated damages.
HUD or its designee shall upon its own action or upon written
request of an authorized representative of the Department of La-
bor withhold or cause to be withheld, from any moneys payable
on account of work performed by the contractor or subcontractor
under any such contract or any other Federal contract with the
same prime contract, or any other Federally-assisted contract
subject to the Contract Work Hours and Safety Standards Act
which is held by the same prime contractor such sums as may be
determined to be necessary to satisfy any liabilities of such con-
tractor or subcontractor for unpaid wages and liquidated damages
as provided in the clause set forth in subparagraph (2) of this
paragraph.
(4) Subcontracts. The contractor or subcontractor shall insert
in any subcontracts the clauses set forth in subparagraph (1)
through (4) of this paragraph and also a clause requiring the sub-
contractors to include these clauses in any lower tier subcontracts.
The prime contractor shall be responsible for compliance by any
subcontractor or lower tier subcontractor with the clauses set forth
in subparagraphs (1) through (4) of this paragraph.
C. Health and Safety. The provisions of this paragraph C are ap-
plicable only where the amount of the prime contract exceeds
$100,000.
(1) No laborer or mechanic shall be required to work in surround-
ings or under working conditions which are unsanitary, hazard-
ous, or dangerous to his health and safety as determined under
construction safety and health standards promulgated by the Sec-
retary of Labor by regulation.
(2) The Contractor shall comply with all regulations issued by the
Secretary of Labor pursuant to Title 29 Part 1926 and failure to
comply may result in imposition of sanctions pursuant to the Con-
tract Work Hours and Safety Standards Act, 40 USC 3701 et seq.
(3) The Contractor shall include the provisions of this para-
graph in every subcontract so that such provisions will be
binding on each subcontractor. The Contractor shall take such
action with respect to any subcontract as the Secretary of
Housing and Urban Development or the Secretary of Labor
shall direct as a means of enforcing such provisions.
Previous edition is obsolete
Page 4 of 4
form HUD-4010 (07/2003)
ref. Handbook 1344.1
journeymen hourly rate specified in the applicable wage determi-
nation. Apprentices shall be paid fringe benefits in accordance
with the provisions of the apprenticeship program. If the appren-
ticeship program does not specify fringe benefits, apprentices must
be paid the full amount of fringe benefits listed on the wage deter-
mination for the applicable classification. If the Administrator de-
termines that a different practice prevails for the applicable ap-
prentice classification, fringes shall be paid in accordance with
that determination. In the event the Office of Apprenticeship Train-
ing, Employer and Labor Services, or a State Apprenticeship
Agency recognized by the Office, withdraws approval of an ap-
prenticeship program, the contractor will no longer be permitted
to utilize apprentices at less than the applicable predetermined
rate for the work performed until an acceptable program is ap-
proved.
(ii) Trainees. Except as provided in 29 CFR 5.16, trainees will
not be permitted to work at less than the predetermined rate for
the work performed unless they are employed pursuant to and
individually registered in a program which has received prior ap-
proval, evidenced by formal certification by the U.S. Department
of Labor, Employment and Training Administration. The ratio of
trainees to journeymen on the job site shall not be greater than
permitted under the plan approved by the Employment and Train-
ing Administration. Every trainee must be paid at not less than
the rate specified in the approved program for the trainee's level
of progress, expressed as a percentage of the journeyman hourly
rate specified in the applicable wage determination. Trainees shall
be paid fringe benefits in accordance with the provisions of the
trainee program. If the trainee program does not mention fringe
benefits, trainees shall be paid the full amount of frin~le benefits
listed on the wage determination unless the Administrator of the
Wage and Hour Division determines that there is an apprentice-
ship program associated with the corresponding journeyman wage
rate on the wage determination which provides for less than full
fringe benefits for apprentices. Any employee listed on the pay-
roll at a trainee rate who is not registered and participating in a
training plan approved by the Employment and Training Adminis-
. tration shall be paid not less than the applicable wage rate on the
wage determination for the work actually performed. In addition,
any trainee performing work on the job site in excess of the ratio
permitted under the registered program shall be paid not less than
the applicable wage rate on the wage determination for the work
actually performed. In the event the Employment and Training
Administration withdraws approval of a training program, the con-
tractor will no longer be permitted to utilize trainees alless than
the applicable predetermined rate for the work performed until an
acceptable program is approved.
(iii) Equal employment opportunity. The utilization of appren-
tices, trainees and journeymen under 29 CFR Part 5 shall be in
conformity with the equal employment opportunity requirements
of Executive Order 11246, as amended, and 29 CFR Part 30.
5. Compliance with Copeland Act requirements. The contrac-
tor shall comply with the requirements of 29 CFR Part 3 which are
incorporated by reference in this contract
6. Subcontracts. The contractor or subcontractor will insert in
any subcontracts the clauses contained in subparagraphs 1
through 11 of this paragraph A and such other clauses as HUD or
its designee may by appropriate instructions require, and a copy
of the applicable prevailing wage decision, and also a clause re-
quiring the subcontractors to include these clauses in any lower
tier subcontracts. The prime contractor shall be responsible for
the compliance by any subcontractor or lower tier subcontractor
with all the contract clauses in this paragraph.
7. Contract termination; debarment. A breach of the contract
clauses in 29 CFR 5.5 may be grounds for termination of the con-
tract and for debarment as a contractor and a subcontractor as
provided in 29 CFR 5.12.
8. Compliance with Davis-Bacon and Related Act Requirements.
All rulings and interpretations of the Davis-Bacon and Related
Acts contained in 29 CFR Parts 1, 3, and 5 are herein incorpo-
rated by reference in this contract
9. Disputes concerning labor standards. Disputes arising out
of the labor standards provisions of this contract shall not be sub-
ject to the general disputes clause of this contract. Such disputes
shall be resolved in accordance with the procedures of the De-
partment of Labor set forth in 29 CFR Parts 5, 6, and 7. Disputes
within the meaning of this clause include disputes between the
contractor (or any of its subcontractors) and HUD or its designee,
the U.S. Department of Labor, or the employees or their repre-
sentatives.
10. (i) Certification of Eligibility. By entering into this contract
the contractor certifies that neither it (nor he or she) nor any per-
son or firm who has an interest in the contractor's firm is a person
or firm ineligible to be awarded Government contracts by virtue of
Section 3(a) of the Davis-Bacon Act or 29 CFR 5.12(a)(1) or to be
awarded HUD contracts or participate in HUD programs pursuant
to 24 CFR Part 24.
(ii) No part of this contract shall be subcontracted to any person
or firm ineligible for award of a Government contract by virtue of
Section 3(a) of the Davis-Bacon Act or 29 CFR 5.12(a)(1) or to be
awarded HUD contracts or participate in HUD programs pursuant
to 24 CFR Part 24.
(iii) The penalty for making false statements is prescribed in the
U.S. Criminal Code, 18 U.S.C. 1001. Additionally, U.S. Criminal
Code, Section 1 01 0, Title 18, U.S.C., "Federal Housing Adminis-
tration transactions", provides in part: "Whoever, for the purpose
of . . . influencing in any way the action of such Administration.....
makes, utters or publishes any statement knowing the same to be
false..... shall be fined not more than $5,000 or imprisoned not
more than two years, or both."
11. Complaints, Proceedings, or Testimony by Employees.
No laborer or mechanic to whom the wage, salary, or other labor
standards provisions of this Contract are applicable shall be dis-
charged or in any other manner discriminated against by the Con-
tractor or any subcontractor because such employee has filed any
complaint or instituted or caused to be instituted any proceeding
or has testified or is about to testify in any proceeding under or
relating to the labor standards applicable under this Contract to
his employer.
B. Contract Work Hours and Safety Standards Act. The provi-
sions of this paragraph B are applicable only where the amount of
the prime contract exceeds $100,000. As used in this paragraph, the
terms "laborers" and "mechanics" include watchmen and guards.
(1) Overtime requirements. No contractor or subcontractor con-
tracting for any part of the contract work which may require or involve
the employment of laborers or mechanics shall require or permit any
such laborer or mechanic in any workweek in which he or she is
employed on such work to work in excess of 40 hours in such work-
week unless such laborer or mechanic receives compensation at a
rate not less than one and one-half times the basic rate of pay for all
hours worked in excess of 40 hours in such workweek.
(2) Violation; liability for unpaid wages; liquidated damages.
In the event of any violation of the clause set forth in subpara-
Previous edition is obsolete
Page 3 of 4
form HUD-4010 (07/2003)
ref. Handbook 1344.1
of the wages required by the contract, HUD or its designee may,
after written notice to the contractor, sponsor, applicant, or owner,
take such action as may be necessary to cause the suspension
of any further payment, advance, or guarantee of funds until such
violations have ceased. HUD or its designee may, after written
notice to the contractor, disburse such amounts withheld for and
on account of the contractor or subcontractor to the respective
employees to whom they are due. The Comptroller General shall
make such disbursements in the case of direct Davis-Bacon Act
contracts.
3. (i) Payrolls and basic records. Payrolls and basic records
relating thereto shall be maintained by the contractor during the
course of the work preserved for a period of three years thereaf-
ter for all laborers and mechanics working at the site of the work.
Such records shall contain the name, address, and social secu-
rity number of each such worker, his or her correct classification,
hourly rates of wages paid (including rates of contributions or costs
anticipated for bona fide fringe benefits or cash equivalents thereof
of the types described in Section l(b)(2)(B) of the Davis-bacon
Act), daily and weekly number of hours worked, deductions made
and actual wages paid. Whenever the Secretary of Labor has
found under 29 CFR 5.5 (a)(1 )(iv) that the wages of any laborer or
mechanic include the amount of any costs reasonably anticipated
in providing benefits under a plan or program described in Sec-
tion l(b)(2)(B) of the Davis-Bacon Act, the contractor shall main-
tain records which show that the commitment to provide such
benefits is enforceable, that the plan or program is financially re-
sponsible, and that the plan or program has been communicated
in writing to the laborers or mechanics affected, and records which
show the costs anticipated or the actual cost incurred in providing
such benefits. Contractors employing apprentices or trainees
under approved programs shall maintain written evidence of the
registration of apprenticeship programs and certification of trainee
programs, the registration of the apprentices and trainees, and
the ratios and wage rates prescribed in the applicable programs.
(Approved by the Office of Management and Budget under OMB
Control Numbers 1215-0140 and 1215-0017.)
(ii) (a) The contractor shall submit weekly for each week in which
any contract work is performed a copy of all payrolls to HUD or its
designee if the agency is a party to the contract, but if the agency
is not such a party, the contractor will submit the payrolls to the
applicant sponsor, or owner, as the case may be, for transmission
to HUD or its designee. The payrolls submitted shall set out ac-
curately and completely all of the information required to be main-
tained under 29 CFR 5.5(a)(3)(i). This information may be submit-
ted in any form desired. Optional Form WH-347 is available for
this purpose and may be purchased from the Superintendent of
Documents (Federal Stock Number 029-005-00014-1), U.S. Gov-
ernment Printing Office, Washington, DC 20402. The prime con-
tractor is responsible for the submission of copies of payrolls by
all subcontractors. (Approved by the Office of Management and
Budget under OMB Control Number 1215-0149.)
(b) Each payroll submitted shall be accompanied by a "State-
ment of Compliance," signed by the contractor or subcontractor or
his or her agent who pays or supervises the payment of the per-
sons employed under the contract and shall certify the following:
(1) That the payroll for the payroll period contains the information
required to be maintained under 29 CFR 5.5 (a)(3)(i) and that
such information is correct and complete;
(2) That each laborer or mechanic (including each helper, ap-
prentice, and trainee) employed on the contract during the payroll
period has been paid the full weekly wages earned, without re-
bate, either directly or indirectly, and that no deductions have been
made either directly or indirectly from the full wages earned, other
than permissible deductions as set forth in 29 CFR Part 3;
(3) That each laborer or mechanic has been paid not less than
the applicable wage rates and fringe benefits or cash equivalents
for the classification of work performed, as specified in the appli-
cable wage determination incorporated into the contract.
(c) The weekly submission of a properly executed certification
set forth on the reverse side of Optional Form WH-347 shall sat-
isfy the requirement for submission of the "Statement of Compli-
ance" required by subparagraph A.3.(ii)(b).
(d) The falsification of any of the above certifications may subject
the contractor or subcontractor to civil or criminal prosecution
under Section 1001 of Title 18 and Section 231 of Title 31 of the
United States Code.
(iii) The contractor or subcontractor shall make the records re-
quired under subparagraph A.3.(i) available for inspection, copy-
ing, or transcription by authorized representatives of HUD or its
designee or the Department of Labor, and shall permit such rep-
resentatives to interview employees during working hours on the
job. If the contractor or subcontractor fails to submit the required
records or to make them available, HUD or its designee may, after
written notice to the contractor, sponsor, applicant or owner, take
such action as may be necessary to cause the suspension of any
further payment, advance, or guarantee of funds. Furthermore,
failure to submit the required records upon request or to make
such records available may be grounds for debarment action pur-
suant to 29 CFR 5.12.
4. Apprentices and Trainees.
(i) Apprentices. Apprentices will be permitted to work at less
than the predetermined rate for the work they performed when
they are employed pursuant to and individually registered in a
bona fide apprenticeship program registered with the U.S. De-
partment of Labor, Employment and Training Administration, Of-
fice of Apprenticeship Training, Employer and Labor Services, or
with a State Apprenticeship Agency recognized by the Office, or if
a person is employed in his or her first 90 days of probationary.
employment as an apprentice in such an apprenticeship program,
who is not individually registered in the program, but who has
been certified by the Office of Apprenticeship Training, Employer
and Labor Services or a State Apprenticeship Agency (where
appropriate) to be eligible for probationary employment as an
apprentice. The allowable ratio of apprentices to journeymen on
the job site in any craft classification shall not be greater than the
ratio permitted to the contractor as to the entire work force under
the registered program. Any worker listed on a payroll at an ap-
prentice wage rate, who is not registered or otherwise employed
as stated above, shall be paid not less than the applicable wage
rate on the wage determination for the classification of work actu-
ally performed. In addition, any apprentice performing work on
the job site in excess of the ratio permitted under the registered
program shall be paid not less than the applicable wage rate on
the wage determination for the work actually performed. Where a
contractor is performing construction on a project in a locality other
than that in which its program is registered, the ratios and wage
rates (expressed in percentages of the journeyman's hourly rate)
specified in the contractor's or subcontractor's registered program
shall be observed. Every apprentice must be paid at not less
than the rate specified in the registered program for the
apprentice's level of progress, expressed as a percentage of the
Previous edition is obsolete
Page 2 of 4
form HUD-4010 (07/2003)
ref. Handbook 1344.1
Federal Labor Standards Provisions
U.S. Department of Housing
and Urban Development
Office of Labor Relations
Applicability
The Project or Program to which the construction work covered
by this contract pertains is being assisted by the United States of
America and the following Federal Labor Standards Provisions
are included in this Contract pursuant to the provisions applicable
to such Federal assistance.
A. 1. (i) Minimum Wages. All laborers and mechanics em-
ployed or working upon the site of the work will be paid uncondi-
tionally and not less often than once a week, and without subse-
quent deduction or rebate on any account (except such payroll
deductions as are permitted by regulations issued by the Secre-
tary of Labor under the Copeland Act (29 CFR Part 3), the full
amount of wages and bona fide fringe benefits (or cash equiva-
lents thereof) due at time of payment computed at rates not less
than those contained in the wage determination of the Secretary
of Labor which is attached hereto and made a part hereof, re-
gardless of any contractual relationship which may be alleged to
exist between the contractor and such laborers and mechanics.
Contributions made or costs reasonably anticipated for bona fide
fringe benefits under Section l(b)(2) of the Davis-Bacon Act on
behalf of laborers or mechanics are considered wages paid to
such laborers or mechanics, subject to the provisions of 29 CFR
5.5(a)(1 )(iv); also, regular contributions made or costs incurred
for more than a weekly period (but not less often than quarterly)
under plans, funds, or programs, which cover the particular weekly
period, are deemed to be constructively made or incurr~d during
such weekly period.
Such laborers and mechanics shall be paid the appropriate wage
rate and fringe benefits on the wage determination for the classi-
fication of work actually performed, without regard to skill, except
as provided in 29 CFR 5.5(a)(4). Laborers or mechanics per-
forming work in more than one classification may be compensated
at the rate specified for each classification for the time actually
worked therein: Provided, That the employer's payroll records
accurately set forth the time spent in each classification in which
work is performed. The wage determination (including any addi-
tional classification and wage rates conformed under 29 CFR
5.5(a)(1 )(ii) and the Davis-Bacon poster (WH-1321 ) shall be posted
at all times by the contractor and its subcontractors at the site of
the work in a prominent and accessible, place where it can be
easily seen by the workers.
(ii) (a) Any class of laborers or mechanics which is not listed in
the wage determination and which is to be employed under the
contract shall be classified in conformance with the wage deter-
mination. HUD shall approve an additional classification and wage
rate and fringe benefits therefor only when the following criteria
have been met:
(1) The work to be performed by the classification requested is
not performed by a classification in the wage determination; and
(2) The classification is utilized in the area by the construction
industry; and
(3) The proposed wage rate, including any bona fide fringe ben-
efits, bears a reasonable relationship to the wage rates contained
in the wage determination.
(b) If the contractor and the laborers and mechanics to be em-
ployed in the classification (if known), or their representatives,
and HUD or its designee agree on the classification and wage
rate (including the amount designated for fringe benefits where
appropriate), a report of the action taken shall be sent by HUD or
its designee to the Administrator of the Wage and Hour Division,
Employment Standards Administration, U.S. Department of La-
bor, Washington, D.C. 20210. The Administrator, or an authorized
representative, will approve, modify, or disapprove every additional
classification action within 30 days of receipt and so advise HUD
or its designee or will notify HUD or its designee within the 30-day
period that additional time is necessary. (Approved by the Office
of Management and Budget under OMB control number 1215-
0140.)
(c) In the event the contractor, the laborers or mechanics to be
employed in the classification or their representatives, and HUD
or its designee do not agree on the proposed classification and
wage rate (including the amount designated for fringe benefits,
where appropriate), HUD or its designee shall refer the questions,
including the views of all interested parties and the recommenda-
tion of HUD or its designee, to the Administrator for determina-
tion. The Administrator, or an authorized representative, will is-
sue a determination within 30 days of receipt and so advise HUD
or its designee or will notify HUD or its designee within the 30-day
period that additional time is necessary. (Approved by the Office
of Management and Budget under OMB Control Number 1215-
0140.)
(d) The wage rate (including fringe benefits where appropriate)
determined pursuant to subparagraphs (1 )(ii)(b) or (c) of this para-
graph, shall be paid to all workers performing work in the classifi-
cation under this contract from the first day on which work is per-
formed in the classification.
(iii) Whenever the minimum wage rate prescribed in the contract
for a class of laborers or mechanics includes a fringe benefit which
is not expressed as an hourly rate, the contractor shall either pay
the benefit as stated in the wage determination or shall pay an-
other bona fide fringe benefit or an hourly cash equivalent thereof.
(iv) If the contractor does not make payments to a trustee or
other third person, the contractor may consider as part of the
wages of any laborer or mechanic the amount of any costs rea-
sonably anticipated in providing bona fide fringe benefits under a
plan or program, Provided, That the Secretary of Labor has found,
upon the written request of the contractor, that the applicable stan-
dards of the Davis-Bacon Act have been met. The Secretary of
Labor may require the contractor to set aside in a separate ac-
count assets for the meeting of obligations under the plan or pro-
gram. (Approved by the Office of Management and Budget under
OMB Control Number 1215-0140.)
2. Withholding. HUD or its designee shall upon its own action or
upon written request of an authorized representative of the De-
partment of Labor withhold or cause to be withheld from the con-
tractor under this contract or any other Federal contract with the
same prime contractor, or any other Federally-assisted contract
subject to Davis-Bacon prevailing wage requirements, which is
held by the same prime contractor so much of the accrued pay-
ments or advances as may be considered necessary to pay la-
borers and mechanics, including apprentices, trainees and help-
ers, employed by the contractor or any subcontractor the full
amount of wages required by the contract. In the event of failure
to pay any laborer or mechanic, including any apprentice, trainee
or helper, employed or working on the site of the work, all or part
Previous edition is obsolete
Page 1 of 4
form HUD-4010 (07/2003)
ref. Handbook 1344.1
2.) Ifthe answer to the question in 1.) is yes, then an interested party (those affected by the action) can
request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29
CFR Part 7). Write to:
Wage and Hour Administrator
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the interested party's position and by any
information (wage payment data, project description, area practice material, etc.) that the requestor
considers relevant to the issue.
3.) If the decision of the Administrator is not favorable, aninterested party may appeal directly to the
Administrative Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
4.) All decisions by the Administrative Review Board are final.
END OF GENERAL DECISION
Shop Drawings & Submittals
date: 5//8/07
To: City of Bremerton / Bremerton Parks and Rec.
680 Lebo Boulevard
Bremerton, W A. 98310
Glazing Contractor: Sound Glass Sales rnc .
5102 auto center way
Bremerton, wa 98312
360-479-6099 office
360-479-5011 fax
Project: Jarstad Pool
50 Magnuson way
Bremerton, W A. 98312
Products: U.S Aluminum Commercial Products, Crytalite Skylights
~.
Job tt008 - PARK AND REC
, --.-/'
(A) 2 Thus
T
1
I II
T T T
T
, II
I<
58
1
t
,,/,..
)Ik
~'(
j
60-1/2"
eq,
eq.
eq,
21'
(BJ I Thus
7'
)
T T T
T .
T
k )/k )Ik
58'
L
;.lIE
)I~
J
eq.
64-13/16"
eq,
eq.
ego
28'
.~~yC% r:gltl;fe5
tpre/ ~/~tJ6S',
.--.-/'
C:i
CA
"-'"
. -....-' ~
=
=
=
<:;c>
c--
=--
"-'"
""'"
---
CC>
---
<==
-"'-
~
CA>
Page 1 of 1
-=
<==
<==
~
---
<==
<==
J-
C'l
~
t'c
.J-
~
-c
\-
\D '"
~ J
~ q:
w~
-1
\J
o
(-
J-
~ ~
::5
---
~
~~
~)
~ s:
21;
~
~
DCTA\L @
11442
11442
;==
i! )
!:=
IX200
CIERE S IDe '1' JltlNl13
RE.vevsc Fo'< 0 r~Oc;,. >IG" ~ l oE"
:'
l'
CD \"^ 'j)
CtlANA}{L
L - $~LiWT
IT4601
M~11
.'.4''' ., ''''''...
DEtJ\\L CD CLe~~S~OR1' He~D
IM453
. ..F LA~# iNq
~
'iJeTA'L 6) clef? E <;~OK<t 11 LL
7-81
, ;'
United States Aluminum
Commercial Products Group
STOREFRONTS
-. '1.
h"~\
Technical Data
Thermal Center Glazed · Series IT 451
Series IT451 Thermal Cenler Glazed
System offers an outstanding value by
combining increased thermal perfor-
mance with low cost conventional
flush glazing. This system features the
Poly-Aluminizern. and Struct-Unkn.
thermal bread technology and ten
year warranty as described in the
Warranty For Thermally Broken
Framing Systems. It was especially
engineered to satisfy the increasing
demands for energy conservation.
Series IT451 may'be glazed from the
interior or exterior and is well suited
for storefront applications requiring
increased thermal performance.
.....-"
/ ;-
SERIES WIDTH DEPTH GLAZING IN FILLS APPLICATION
Storefronts in
IT451 2" (50.8) 4112" (114.3) 1" (25) geographic areas
requiring thermal
performance
GLASS SIZES*
Glass Width and Glass Height
= Daylite Opening + 7fa" (22.2)
. These formulae do not take into account glass tolerances. Consult glass manufacturer before ordering glass.
January 1998
USA-1I9B-PROCON
8-81
STOREFRONTS
United States Aluminum
Commercial Products Group
../~~'~,
r _.~
Thermal Center Glazed . Series 1T451 L:.:/,
S pecial Features
Two piece (split) vertical mullions and
horizontals are joined together with
screws driven through back of vertical
members into the extruded screw
splines in the horizontals as shown
below. The panels are then snapped
together in the field to create long runs.
Extruded subsill flashing must be used
with this type installation.
,
Anchor clips are available for attac~ing
horizontal members to tubular vertical
members when required or selected.
~. ,,)
~' _ ,,;..."1{
),
~.
January 1998
USA-1/9B-PROCON
4-B1
STOREFRONTS
(
United States Aluminum
Commercial Products Group
Specifications
· Series IT451
Center Glazed
,/:-<""~~::,\
-',~ " , '. ,,:.;;'
SERIES FACE WIDTH DEPTH GLAZING INFILL GLAZING METHOD
IT451 2" (50.8) 41/2" (114.3) 1" (25) Exterior/Interior
I. GENERAL
DESCRIPTION
Work Included: Furnish all necessary materi-
als, labor and equipment for the complete
installation of aluminum framing as shown on
the drawings and specified herein. (Specifier
Note: It is suggested that related items such as
aluminum entrance doors, glass, and sealants
be included whenever possible.)
Work Not Included: Structural support of the
framing system, interior closures, trim.
(Specifier list other exclusions).
Related Work Specified Elsewhere: (Specifier
list).
QUALITY ASSURANCE,
Drawings and specifications are Iiased on the
Series 1T451 THERMAL CENTER
GLAZED system as manufactured by United
States Aluminum. Whenever substitute prod-
ucts are to be considered, supporting technical
literature, samples, drawings and performance
data must be submitted ten (10) days prior to
bid in order to make a valid comparison of the
products involved. Test reports certified by an
independent test laboratory must be made
available upon request.
PERFORMANCE REQUIREMENTS
Air infiltration - shall be tested in accordance
with ASTM E 283. Infiltration shall not
exceed .06 CFM per square foot
(.0003m3/sm2)" of fixed area when tested at
6.24 P.S.F. (300 Pa).
Water Infiltration - shall be tested in accor-
dance with ASTM E 331. No water penetra-
tion at test pressure of 8 P.S.F. (384 Pa).
Structural Performance - shall be tested in
accordance with ASTM E 330 and based on:
. Maximum deflection of 1/175 of the span
. Allowable stress with a safety factor of 1.65
The system shall perform to this criteria under
a windload of (Specify) P.S.F.
Structural Integrity - To ensure guaranteed
structural integrity all framing components
shall be intermittently debridged leaving a
small portion of the thermal pocket remaining
intact to create a structural link between the
exterior and interior surfaces without compro-
mising the thermal performance of the system.
Manufacturer shall provide a Ten Year
Warranty on thermal framing against failure
resulting from the following:
Longitudinal or transverse thermal barrier
shrinkage.
. Thermal barrier cracking.
Structural failure of the thermal barrier
material.
. Loss of adhesion or loss of prescribed edge
pressure on the glazed material resulting
in excessive air and water infiltration.
Thermal Performance - Series IT451 shall be
tested in accordance with AAMA 1503.1-88.
II. PRODUCTS
MATERIALS
Extrusions shall be 6063- T5 alloy and temper
(ASTM B221 alloy T5 temper), thermally
broken by a two part chemically cured high
density polyurethane.
To ensure that composite strength remains
unaltered during thermal cycling, a mechani-
cal bond between the aluminum and the ther-
mal filling shall be created by mechanically
abrading the extrusion thermal cavity prior to
filling with the polyurethane polymer.
Fasteners, where exposed, shall be aluminum,
stainless steel or zinc plated steel in accor-
dance with ASTM A 164. Perimeter anchors
shall be aluminum or steel, providing the steel
is properly isolated from the aluminum.
Glazing gaskets shall be E.P.D.M. elastomeric
extrusions.
FINISH
All exposed framing surfaces shall be free of
scratches and other serious blemishes.
Aluminum extrusions shall be given a caustic
etch followed by an anodic oxide treatment to
obtain ...(Specify one ofthefollowing):
_#11 Clear anodic coating
_#22 Dark Bronze anodic coating
_#33 Black anodic coating
A Fluoropolymer paint coating conforming
with the requirements of AAMA 605.2-92.
Color shall be (Specify a U. S. Aluminum
standard color).
FABRICATION
The framing system shall provide for flush
glazing on all sides with no projecting stops.
Vertical and horizontal framing members shall
have a nominal face dimension of 2" (50.8).
Overall depth shall be 41f2" (114.3). Entrance
framing members shall be compatible with
glass framing in appearance.
Provide for internal drainage of infiltrated
water into an extruded aluminum subsiIl chan-
nel where it is drained to the exterior weep
slots.
,.~~)
III. EXECUTION
INSTALLATION
All glass framing shall be set in correct loca-
tions as shown in the details and shall be level,
square, plumb and in alignment with other
work in accordance with the manufacturer's
installation instructions and approved shop
drawings. All joints between framing and the
building structure shall be sealed in order to
secure a watertight installation.
PROTECTION AND CLEANING
After installation the General Contractor shall
adequately protect exposed portions of alu-
minum surfaces from damage by grinding and
polishing compounds, plaster, lime, acid,
cement, or other contaminants. The General
Contractor shall be responsible for final clean-
ing.
," _._---~
'\' .\1l
-'''".,,#
Complete Master Guide Specifications are available on The Aluminizer ™ CD-ROM from U.S. Aluminum
January 1998
USA-1/98-PROCON
Standard Skylights
Series 5842
@
O.C.
..
WEEP HOLES
ACRYLIC DOME
1/16" GLAZING TAPE
1/8" GLAZING TAPE
1/16" GLAZING TAPE
AI. RIVETS 12" O. C. MAX
30028 RAFTER AS OCCURS
RECOMMEND:
SILICONE SEALANT
FIELD FASTENERS, N.B.C.
RECOMMENDED CURB TAPE, N.B.C.
t /4" J
CURB, N.B.C.
. CURB FLASING OR
SIDING AS OCCURS, N.B.C.
0"
1/4"
1/2"
GENERIC GLAZING DETAILS.
ACTUAL DESIGN AND MAKE-UP VARY AS REQUIRED.
(
.\
.\
SS07.DWG ,"
Skylite Manufacturers
5842 PVC
DOUBLE DOME