HomeMy WebLinkAboutCAMBRIAN AVE. N., 910 City of Bremerton PERMIT NUMBER: BB1600057
Department of Community Developrinew DATE ISSUED: 0 1/25J2016
345-6th Street,Ste,600,Bremerton WA 98337 SITE ADDRESS:905 MEADE AVE
ll (360)473-5275 Fax:(360)473-5278
ASSESSOR NUMBER: 3735-020-017.0005 ZONING: IDCC
Name Phone Address Access Code
APPLICANT: HAN LEY CONSTRUCTION 360.876-0870 PO BOX 865 PTP16-AJNI8F
PORT ORCHARD,WA,98366
OWNER: KALMBACH MICHAEL&JERI PO BOX 4250 [KNIOR-28DH3
BREMERTON,WA 98312
CONTRACTOR: IIANLEY CONSTRUCTION 360-876-0870 PO BOX 865 PTP16-AJ1118F
PORT ORCIIARD,WA 98366
LENDER:
SUBMITTED: 01125/2016 APPROVED: EXPIRATION: 07123/2016 STATUS: ISSUED
VALUATION: $9,450.00 Reroof Permit--No underlayment or structural work
KALMBACH COMMERCIAL-RE-ROOF
Rerool'pernilt--no underlay KALMBACH COMMERCIAL-RE-ROOT
ment or 1 OD.00
structural work Building Code Edition:
State Surcharge S4.50
Occupancy Group:
Technology Fee S5.00 Type of Construction;
TOTAL FEES: $109.50 Flood Zone:
Setbacks: (F/L/R'f/R/0)
Sanitation Method:
Number of Bedroonts:
Inspection Requests: FIRS:Fire Inspections (360)473.5386
DCD:Building Inspections: (360)473.5870 HEALTH:Kitsap County Health District (360)337-5285
L&I:Department of Labor and Industries (360)415.4000 PW&U:Public Works-Engineering 060)473.5270
This permit shall become null and void if the described work authorized by this permit has not commenced within 180 days from the date of issuance,or if
the work is suspended or abandoned at any time after the work is commenced for a period of 180 days.It is the responsibility of the permit holder to see that
the required inspections are made,Failure to obtain required inspections may result in stoppage of the work until such time that the permit holder can
susbstantiate to the City of Bremerton that the concealed work meats or exceeds code requirements.Any demolition,testing,or financial burden shall be
borne directly by the permit holder,Failure to substantiate code requirements will indemnify the City against any and all responsibility or liability connected
with the construction,I hereby certify that I have read and examined this permit and know the same to be true and correct,All provisions of laws and
ordinances governing this type of work will be complied with whether specified herein or not.The granting of a permit does not presume to give authority to
violate or cancel provisions of any State or local law regulating construction or the performance of the construction.If listing the owner as general contractor,
I certify that I am exempt from the requirements of the Stale Contractors Registration Law under Section 3,Chapter 126,Laws of 1967,All revisions to an
approved plan require DCD review and approval prior to performing work.All building and tenant occupancy permits are required to pass final Inspection
prior to permit expiration and obtain a certificate of occupancy prior to use or occupancy.
I have read,and agree to abide by the conditions of this permit Including all conditions of zoning,building codes,and State and Federal laws.
SIGNATURE OF OWNER OR AGENT:
PRINTED NAME: 1 3 All-C" DATE:
CONDITIONS
City of Bremerton's approval of this application pertains only to the City's regulatory jurisdiction,and thus compliance with City regulations
does not necessarily ensure compliance with federal or state laws.
1'rinted by:Wood,Tracey mr 01 25!2016 03:24 I'M
City of Bremerton
PERMIT NUMBER: BB16 00057
Department of Community Development DATE ISSUED: 01/2512016
Ut
345-6th Street,Ste.600,Bremerton WA 98337
SITE ADDRESS:905 MEADE AVE
(360)473-5275 Fax:(360)473-5278
ASSESSOR NUMBER; 3735.020-017-0005 ZONING: nee
Name Phone Address Access Code
APPLICANT: HANLEY CONSTRUCTION 360.976-0870 PO BOX$65 PTP16-AJ1118F
POR1ORCHARD,WA 98366
OWNER: KALNIBACH MICHAEL&JERI PO BOX 4250 ]KNIOR-28DI13
BREMERTON,WA 98312
CONTRACTOR: HANLEY CONSTRUCTION 360-876.0870 PO BOX 865 P*I'PI6-AJM8F
PORT ORCHARD,WA 98366
LENDER:
SUBMITTED: 01/2512016 APPROVED: EXPIRATION: 07/23/2016 STATUS: ISSUED
10. (DCD-01) ASBESTOS AND LEAD-BASED PAINT:
ASBESTOS:Prior to performing any renovation or demolition work,Puget Sound Clean Air Agency and Washington
Department of Labor and Industries(L&I)regulations require all asbestos survey be performed to determine whether there are
asbestos-containing mincriats in the work area or structure. The usbeslos survey must be conducted by and EPA-cellified
(AHERA)building inspector(except renovation or owner-occupied single family residences).ror more information,please
contact Clcurt Air Agency through their web site at www.pscleanair.org or by phone at 800.552-3565 or 206-343-8800. The
L&I web site call be found of www.lni.wa.govrrradesLicensing/LicensingReq/Asbestos/defautI.asp.
LEAD-BASED PAINT:A contractor or person receiving compensation who is performing renovation,repairs or painting on
a residential building or a child-occupied facility built before 1978,must be trained and certified by an uccredited training
provider,and registered as a Renovator by(lie Washington State Department of Commerce-Lead-Based Paint Program. For
further information please contact;The Department ofCornnierce website at:wN%,%Y.coiiiinerec.wit,gov/tead,or call: (360)
586-LEAD(5323).
CONTRACTOR:A contractor's registration issued by Washington State Dept.of Labor&Industries is required for anyone
who contracts or submits bids for construction work,including new construction,alterations,repairs,or anyone who consults
or superintends,improves,demolishes,develops residential property for sate,or'-flips"houses.Contact L&I at(360)415-
4000 lot-information.
10. (DCD-IND INSP) A third-party inspection maybe required for this permit. You may cons ider contact ing 1 Ili ird party independent inspector
prior to performing the work so they understand the scope ofwork being performed. A final inspection report front the
independent inspector is required for the Cicy's records.
14, (DCD-14) DCD: Approved Plans,Engineering,Site Plan,Pcniiii,and Conditions shall remain on site and be available for inspection.
Any changes to plans shall be approved before construction is performed.Architect or engineer of record shall approve the
change before Stibrifining a revision.A revision is subject to a revision fee and additional fees for plan review and inspections.
15. (DCD-02) DCD:Validity oFpcTmit,The issuance or granting of permit shalt not be construed to be it permit for,or an approval of,any
violation.of any of the provisions of the Washington State Building code or of any other ordinance of the City of Bremerton.
Permits presuming to give authority to violate or cancel lite provisions of the Washington State Building code or other
ordinances of(lie City of Bremerton shall not be valid.The issuance of permit based on construction documents and other
data shall not prevent file building official from requiring the cotTection of errors in the construction documents and other
data.The building official is also authorized to prevent occupancy or use oft structure where in violation of the Washington
State Building code or of any other ordinances of the City ol'Brenierton.
tS. (FIRF-ROOF) At least two Fire extinguishers with it rating of40-B:C on the rooftluring hot rook.More extinguishers may be needed
depending on the number of torches in operation.Fire watch on root'during hot work and at least I hour after hot work is
conipleled.Follow inanuraclurer's instructions for installation to avoid fire.
20. (DCI)-47) DCD:Rcinspection Fee:All approved filliwi,the printed building permit,and the permit inspection placard,are required to be
on-site for inspection purposes,and work to be inspected shall be complete and ready for inspection.If an inspection is called
for and plans are not available on site,or the work is not ready for inspection,approval will not be granted.In addition,a re-
inspection fee will be charged and must be collected by(he Dcpurtnicrit of Community Development prior to any further
inspections being performed or approvals granted.
MINIMUM INSPECTIONS REQUIRED
To request an inspection,please call(360)473-5870 and he sure to provide your permit number,name on permit,site address,contact phone
number,and Inspection type.To register for on-line inspection access,visit the City's website at www.d.bremerton.1va.us,
Inspection Description
FINAL-BUILDING Final Inspection-Building
Prink)by:Woud.Tnlvcy on:01 25 2016 03:24 I'M Page 2 of 2
f3BI6 000 7
gay' A y`I p
PERMIT CENTE . ......
pp q
COMMERCIAL'
� :* • Building Permit Application
t)cu�rtment of CoauuuiriLy Development * 8,15-6th Street Suite 600 " Bremerton 'WA ft8i3'446Y
(360)473-5275 * Fat(360)473-5278 us
x
Business Name: HaaIayjGoA*Mctorr
Site Address: 910 N Cambrian Bremerton WA 98312
To apply for a property address,contact Public Works at(360)473.5270
CONTRACTOR:Hanley Construction OWNER:Mike Kalmbach
Address: PO Box 865 Address:PO Box 4250
City, State, Zip: Port Orchard,WA 98366 City, State, Zip:Bremerton,WA 98312
License#& Ex . Date:Hanlec-1034DP Phone#: 360- 782-2463
Contact Name:Ashley Olson Authorized Agent Name:
Contact Phone#: 360-876.0870 Address:
Email address:ashley@hanleymofing.com City, State,Zip:
Tax ID/Parcel#: 3735-020-017-0005 Phone#: ( )
[� Sewer ❑ Septic Email address:
xx
NEW COMMERCIAL ❑ TENANT IMPROVEMENT WITH WORK
1! [-1 COMMERCIAL REMODEL ❑ TENANT IMPROVEMENT WITHOUT WORK
COMMERCIAL ADDITION ❑NEW SIGN
COMMERCIAL REPAIR ❑ GRADING(Cubic Yards: )
F]NEW MULTI-FAMILY F REROOF
DEMOLITION_Interior u Exterior** Foundation Wall—_Roof/Section**
**Separate demolition permit and fees required,
Contact Public Works for sewer cap permit(473-5270). Sewer must be capped prior to demolition permit issuance.
F]OTHER:
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE? YES❑ NO []
Scope of work proposed: Remove and replace existing roof with New TPO single ply membrane to manufactures
Specifications.
Square Footage: Building: Construction Type:
Valuation Plan Review Fee Permit Fee surcharge Total Fees
Application for which no permit is issued within 180 days following the date of application shall expire by limitation,and plans and other data
submitted for review may thereafter be returned to the applicant or destroyed by the building official. The building official may extend the time
for action by the applicant for a period not exceeding 180 days on request by the applicant,showing the circumstances beyond the control of the
applicant have prevented action from being taken. No applicant shall be extended more than once. In order to renew action on an application
after expira n,the applic shall resubm plsns and pay a new plan review fee.
/ _r'�. is L,T-�''G�.�_---•--•-'---._.___.. C �• ��?
AI6pf
cant's Signature Dat
1 Rev.July 2008
C
F
E
Email;salesQiroa�Rt.!Com�Webs�oflt�360-769-9680
General Cohtmoor#:HANLEC-1034DP• PO Box 865,Port Orchard,WA 98366
Port Orchard 360-876-9870 • Bainbridge Island 206.842-4321 •Gig Harbor 263:851.0113
This proposal specifically prepared for:
Name: Mike Kalmbach Date: 12/30/14
Project:Kalmbach Commercial Building—Project#6272 Phone:,(360)7824463
Street: 910 N Cambrian Fax:N/A
City: Bremerton ICell:N/A
State: WA Zip: 98312 Email:mikek@pronetcycling,com
We hereby submit this proposal for the follo►ving products anti setTices:
Options 1—Versico 60 mil TPO Membrane Roof System:
1. Prepare area surrounding building with necessary safety equipment. (Cones, barricades,safety zones,
etc.)
2. Provide equipment to lift all materials&equipment to rooftop.
3. Clean existing roof and prepare for installation of new roof system,
4. Install Versico 60 mil TPO single-ply membrane roof system according to manufacturer's
specifications over'/2"EPS Fan-Fold foam. -- G-r}t-4 c b 1 K
I
5. All TPO membrane&fan-fold foam to be mechanically attached.
6. TPO Membrane to be installed on the full height of the interior parapet walls.
7. Install 24 gauge TPO clad metal along entire gutter line.
8. Install new 24 gauge cap metal flashings around the perimeter of the roof. All flashings to have Kynar
500 paint finish,
9. Install(6)new 8"metal roof vents w/TPO boot.
10. Clean jobsite of all roofing related debris at completion of project.
11. Hanley Construction Inc. is a certified commercial roofing products installer.
I 12. Any required HVAC,gas line, craning and/or electrical work by others.
13, Includes a 10-year workmanship warranty and a 20-year material warranty.
Option 1.
cis 0 900
Versico 60 mil TPO
$12,595,00
Family owned and operated since 1980, As usual, the Hanley Construction 10-year Workmanship Guarantee
applies.
Site
sTac not lnciudad e e p It
rhtsgvmtion rnd farlhitty(]O)days.Payment The Above prises,specifications
and eonditiont ore III
Terms:l5Y.dcpotkdue upon aeeeptanceofproposat satisfactory and hereby accepted.Thasignhlgoftbis Customersignatltre:
Remaining balance due uponcompletioo.Anysnpaid proposal aulhorim Hanley Construction Inc,toprovide
balance Including any applicable late lees and/or all tnaterials and services as specified.to no event shall
tdomey fees incurred in collulion will hear interest at Henley Construction be liable(or consequential or
is%per aaoam until paid in fall. incidental damages,itbcttos abttement,lead abatement,
and maid or algae growth ofany type.Aequisition and
cast of any and all ptnnila is the responsibility of
W ororaan Y anfex
Hanley Construction Inc,:
0
B UILDING PERMIT 905 M EAD E AVE
INSPECTION CARD KALMBACH COMMERCIAL - RE-
ROOF
PROTECT THIS CARD FROM THE WEATHER •
j Building0 Plumbing L1 Mechanical Alarm/Sprinkler
This Placard must be posted on or near building and the Permit&"Approved" plans must be at the site.
Permit # BB16 00057 POST ON SITE
Call the following Agency Telephone Numbers for -Property lines shall be properly identified and marked before
inspections: foundation footing inspection.Setbacks are measured to the
Building Department Inspections: (360)473-5870 finished wall structure.
Water-Public Works: (360)473-5927 -Reinspection fee may be assessed if inspection has been
requested when not ready or corrections are not completed.
PW-Public Works-Engineering_ (360)473-5270 Permit,approved plans,engineering,and inspection card shall
Kitsap Public Health: (360)337-5235 be on site during construction or Reinspection Fee may be
Fire-Fire Department: (360)473-5385 assessed.
L&I -Dept.of Labor and Industry: (360)415-4000
Inspection APP DATE Notes
Final Inspection -Building ..' m i
i
FINAL BUILDING (360)473-5870
All of the above must be approved. Approved Final Inspection grants occupancy for single family residence only.
l Commercial structures require separate Certificate of Occupancy.
DO NOT OCCUPY BUILDING WITHOUT BUILDING DEPARTMENT APPROVAL
Page l of 1
ER FZ FE PA ET F!,l 'Y F' tw,15 1 '0"',
286 4 t h 5 bi t
Phonew ( 360 ) ISe-517S F4K: ( 360 ) 4761-00Py:`?
BUTLOTNG PERMIf
TA Amir, 90 N LAHRRIAN AW, 0, 1011 wn , n? 0WO
"Winn ; PRO NUT IW k a 1 H WI.'
AM" WdW ! AUT WUR11Y 01THCH IN( Pot AR9 cop', A
All POWK! Put Sw WTV Grmlom wo 93=1910
Ownnin PRO Nrl INC
910 N kAMPRIAU AW WHIPPON WA 3)
W& pa, i pnf 5K UP) IY 5719, [C G 1 IQ ;K, W9 WOKK p Wj ,d Wnlnon V �000
was
ov K! >TkjjTV QAVA"TTj*, j 1kj qj(Tk � Y IV I
H, p/"r[a f hlf I Knorm r"!A arO mwo -1 1hp -W kAlm mr w,jvk lol ivy 0-d W 4 hK Pnv nil in 4 a? zwqm -; vo
f (-"10 t Tv of such on rim il, m, M nNo to; Pcin q W 13� R uWar, mE& W rUch wlwit K = rp"10 w
,b�,v,c�cwir,d "ik sip Lin" AT IVY W, Pro! 0 rmawyn A for a p"Ard Id lot mn/o,
H, 15 A, myymooib, i Kv of UY mail! %WY, !Q UP 'I & Wom"Wm on 1 U Win 01f w & to
to rp UOL rew"—d e4r,S,r iwc mo maw, Hir ""W WNW ard mAKV Ike rui ding, A( inAS whyin wis 1w)
pallurp or 4 PI'MA of gal Lo "'d QV TO W Him Offir,K) A 100iHilid lPNPqW0n0 anY WISUP
ill Lkl, '.t,r., t.r,. ke„P of thy woyk until mvich Ww th," Trw "mmit 011Y rw wowNwiply : — 1y PW Idim 4HK 0
(NA P ilr ' ' , L�inhjm on I N:ri ,
H�Jly'r, hly pemAL w bminwimp orwh pac"Imomw, w 1 wwwo0y"In t W5,
� ryy,f 1 1 y or Kohl W r wuw&W with th-
lrrl i"I", t
ram Pro n" t) ,n,
wz mi inr nj in r 'Qi; W"4 Y 1 ym,
j r
OC CC, Ell V
dC
1 C-H if AM WqV jnW QQ n?NK: 01RIX010� A' r� Iljnh"Vl On 1 WON,
/d 41
-Kwowe py : Coil,
�,�........
286 4th Street , Bremerton, WA 98337
Phone: ( 160 ) 478-sa& FAX: 360)
,f
Oju Ap** f ? 11 114 evil rcwyA V ; F" ; 0 u ) ,
1 1 41
MMING4 Mus 1 r (q p w 1 1 rnAf An." 1 J — f K- W ; w- W " ,
W&I It NO MI.V ho , noin , acs Q wuh Yhy V wo W
""] �4 Wohn pl WO knot . of Labor Ind fn !"OuW
I Md.I K! Brow; KmIK ! 1 nor Health PLO vie', 07A
4 i°t�;,.� �',,�. �� - ,CTnpn Priaxwo RY THE MY NF WOMERY)N �10W no, W "WO K F U f 1 In 440 Th:�`
PERN f F n iq n,p , t Rin n Wyk
V A pTO I I 1 1 h I k A V r 4 1 a r 1 1 0 w 1 1 4 1 j 1 4 1 A T V lot ! " I 4 �f: ? 1 14
"';..........
=====,==Amn==="===========n==�=now == Y==========W=====��=�==^ == ==� ==
'
R��M�RTOh ��RMTT [ENTER �
P�kMTT COH�TlIONS �
�
�ermi� Nu O2-b1�� Peg�: l
==========�== �
J�L Ad�res" : Wo N CAMBRIAN ME
-
�
Applioont ; ADT �ECUHITY URVICES INC
0wner P�� NFT IN� �
Cnntrw4 Coy :\ ADT ML/RITY 9EPVI( INC |
' , |
\
�
�e��rip� ion:
|
NkW FIRE AL MM SYSTEM
�onJiL !mw �
o )al�/ m �y���m �!`e } l n��L NFPA 72 and BMC l� i
b )knoX bo� rc Or apo| ioepi�n
c )flr� �larm k r etion /
d )k b ildi nq air! 1 fm) Knox box rpquired l
`� i�nature_
~ |
` |
�
|
�
|
|
|
� |
� |
�
i
|
�
/
�
!
i |
/
! �
~ |
_ �� �, �,m .,�,� .�� �
r
� �
t�
� lii
f �I
t�
1� � � �.
Id ��
,.
� ., �..,. �_ . _ � _ _. .. ,. .. . e ,.
� . � ��
I
�.
� � � i,
�: �i
',
� �. � � " '�
� �,
t
� �r. , ��"
� _., .. �.�a,. � . ._ �, �v . . ., ., 4,. .. . ..., �. _. .. ..
� � �
� �i
� � �
I
I
k
� f
f
d
I k
N I'
t
I
E f
u
p
f p
I I
V 1
I 4
i
�'
i
y
c
l
1
0 : < 7-h
3
\ + »
�
» r
-
E3 FR EE 61 EE FT!F CA P4 F='"L=-F-;�M X C—_EE P4-V FEE F--Z
286 4t// Street, Bremerton, NA 98337
Phone: (360 ) 479-5275 FAX: (360 ) 47e-5270
BUILDING PERMIT
Job Addr: 910 N CAM8RIAN AVE Permit No: 02-0160
Location: PRO NET INC Status: PENDING
Parcel NO: Applied: 04/09/2002
ImoUad:
Applicant : AUT SECURITY SERVICES INC 206-389-8080 EXpirew,
841 PUWELL AVE SW SUITE lRENTON WA 980552910
Owner: PRO NET INC
910 N CAMBRIAN AVE BREMERTON WA 98312
Contractor: ADT SECURITY SERVICES INC 206~389-808Lic 0: ADTSESI03205 Exp: 09-25-2003
841 P0WELL AVE SW SUITE 1RENTON WA 980552910
Subcontr:
D8sO: NEW FIRE ALARM SYSTEM
| valuation * Permit Fees: 54.00 Total Calculated Fee: 93.60
�
1,500.00 * Plan Check Fees: 35.10 Additional Fees: OO
� ~ .
m Other Faoa: 4.50 Total Permit Fee: 93.60
This nrnnit shall become null and void if the building or work authorized by this permit is not commenced within
1en days from the date of such »ennit, or if this building or work authorized by such permit is suspended or
| abandoned at ;,any time after the work is commenced for a period of zan dare.
|
| No/ICE - It is the responsibility of the permit holder, not the City of Bremerton or Building official to see
to it that required inspections aro made. The, vermi+, holder must notify the Buildirm official when ready fay
inspections. Failure of the v*rmit holder to notify the Building official of required insvec+ions may result
in the stoppage of the work until such time that the permit holder can substantiate to the building nffioiml
that the concealed work meets or exceeds code requirements. Any demoliticw, testing, or financial burden shall
be borne directly by the Permit holder. Failure to substantiate code ,enuirem*nka will indemnify the city
against any and all responsibility or liability connected with the construction.
�
I hereby certify that I have read and examined this permit and know the same to be true and correct. All �
provisions of laws and ordinances eavernirm ,his type of work will be complied with whether specified herein �
or not. The granting of a permit does not *resume to give authority to violate or cancel the provisions of
any other state or local law regulatino construction or the performance of construction.
|
Signature: 0at�:
� I certify that I am exempt from the requirements of the state contractor's registration law, under
Section 3, Chapter 126" laws of 1967. �
�igna�ure: oate:
[\ |
Permit Center--Approved By: Dato: 16
_______
Lki
. .
___
i
.,, Y Olt IN f �- �,,,
i G 4 k' Atreet , Orspartm, 9 98
!AMY 478 - 5270 MY; NO )
Rip, f,� fh,, 1 w J 4 . 1
�
F
f,
I
ee ,
f b 1� ri�fl If•' � '�,.S� 11&i i if
t
k
lit P , ,fM ,1,.AN f UK ,f, ,0 „
.fkf",I-v „t,f(" t,i, i ';� ,L 'p, I�"➢
M P,W ( 4., i fP, ,'yt U PT TVAON wo 9pann"li"
valuation 0 pvmit Avon;
lt � d Qjc"jy1pd Pee . to
li
r
0, 10 AMMOU Nor , 00
Y
it
01if or, � ;,r rto
f{
f "w
'"T ,. r�.. 1'F' or, <r 6 P'J,` i f:f 1.
�I
e
IV SMA Ni
{, fi,., ,..Y I„g r ',t ,.. ,.h„a.. ff,,;;', "r'.r, n,winyd tW p.,�f;i;i 'DI y.J ll'r^„6 %',fl il'' to ix v .., ,. t,f.
ph; ffE,. ,'i tr, H;1 ;Uf ,,,, j
Upy tint T am Inymok f f ,,, f„f,,,,;,', -f.. of O{,,,, F.wo noWn , ;-,
r � (G 1�
f
v
I
BUMEM
r:
� m
Ili L✓ \
04/05/2002 09:43 3604785278 COMMUNITY DEVELOPMEN PAGE 02
nuildinLy Permit Application
I
4z�p
City Of Bre
merton,I eerton,WA 98337 Phone: (360)478-5275 Fax: (360)478-5278
APPLICANT: 0OWNER ,�CONTRACTOR 0AUTHORIZED AGENT
i-
`71:Ice Aidress: Q�o�A-
-7,
17-11 j1p., YI)
A Aj
;=2
1-i.,inizaczor L--cen r_:XLraUon r)ate,--
onta=Persom, Contact Phone=-
Check, the =e of a plication for below: 5'3
❑ SF RESIDENTIAL NEW ❑ COMMERCIAL NEW GARAGE
ED DUPLEX GO?v1.N1ERC1A.L R.E',V1;ODEL 13 ACCESSORY BLDG
❑ -YUNTUFACTURED HOME ❑ COMMERCUL ADDIT ION SIGN
0 RESIDE.N-TiAL REMODEL
0 COMIMERICAL REPAik' ❑ DEMO
❑ RESIDENTULADDITION C3 MULTI-FA.MILY ❑ GRADING (Cubic vards.-)
❑ RESIDENTLA1 REPAIR ❑ TEN-ANT II'vfPROVEMENT ❑ OTHER:
Scope of Work Proposed;
SquareFootage: Owelng: Garage:-
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE- YES NO
Valuation Plan Review Fee Permit fee o-T-Surcharges Tbml Fees i
C) Stare: 5 4.50
kpplic;anons for which no permit is issue within 180 days following the date of Application ;hail expire by limitation. and plans
.ind oiber data submined for review may thereafter be returned to the applicant or destroyed by the building official. The building
officiai may emend ;he time for action by the applicanr for A period not t%ceeding 180 days on request by the applicant shoving
that circumstances beyond the control of the applicant have prevented Action from being taken. No applicant shall be extended
rnvve than once. In order to renew action on an application after expiration. the Applicant shall resubmit plans and pay a new plan
review fee.
APPLICA,NT'S SIGNATURE: DATE-DATE-
A PR 0 20112
'� f
R „ � r , . � �
� � �
��, _ ,
�� a
��� �� �
,p
��
�� � � �
_._ f _ _. r,. � �
G
I
I
� � 1
d
j
4
I
J
C )
V
`kl 0rr
f Y
k �'
�'
I I
i
I L
}
i
�,
f�
F
f!
�_
�II I
Vff'
l
I'
i,
ii
�I
JI
j'
�'',
m'w u� y
¢� f
,gla�����;
� I
as N
�
VV
a `
loll
aa
ISO
ca
ILL
w4
u-w
u
� P
U,
�I
m �V
1
C1 ,
�C7
00
ILZ
�C7
CO (I-) C
4& Ak ,
ADT Security Services,Inc.
841 PowellAvenue SW
-- — — Suite 101
RI-e & Renton, WA 98055-2910
secutity
� Te%:206 624 3 103
LIST OF MATERIALS SUPPLIED TO: Fax;206 654 2 189
ADT
Pro Net, Inc.
910 N Cambrian Ave.
Bremerton, WA 98312-3804
FOR FIRE ALARM MONITORING
BY: ADT SECURITY SYSTEMS
CONTACT: Kurt Nitschman
TELEPHONE: 206-389-8080
REGISTRATION NUMBER: ADTSES I032O5
DATE: 2/28/02
QUANTITY MODEL DESCRIPTION
1 Vista100 Fire Alarm Control Panel
1 AdEMCO Annunciator
1 PS24 ADEMCO 24volt Power Supply
6 2151 System Sensor Photoelectric Smoke
Detector 100 Series Plug in
1 HD-603 Heat Detector, 135' Fixed Temp
1 NS-2475W-FR Wheelock Horn/Strobe
1 MB-G10-24-R Wheelock Bell Indoor/Outdoor 10"
1 WM3T-24-FR Wheelock Strobe, 24volt, 117 candela
1 RSS-24W-FR Wheelock Strobe 15/75 candela
NOTE: This is a new installation in a newly constructed
building.
�% WIN
IV
F
V Ah PP
10y/FE11
V,jre prole .'Ija»)n %y Vaawlns Rita Cr~>W�Y
, W rf,,A, Utic, and
a�Er d
S �
lat, review
a
<()6.1 DI'l
Zk M8
FIRE MARSH,a",1
Battery Calculation Worksheet
ycQISeCurity
Fire &It
(all currents stated in mA)
02/28/02
PROJECT: Pro Net, Inc., Bremerton,WA
Device Quantity of Standby mA Alarm mA Total Device Total Device
Description Devices Per Device Per Device Standby mA Alarm mA
System Devices
Fire Alarm Control Panel 1 300 470 300 470
1 40 100 40 100
Key Pad
PS24 Power Supply 1 45 45 45 45
385 615
Total System Current
Smoke Detectors/Auxiliary Devices
System Sensor 2151 Photoelectric Smoke 6 2 6 12 36
0 0
Motion Sensors 3 1 5 3 15
Device Totals 12 15 51
Notification Appliances(list all)
Wheelock NS-2475W-FR Horn/Strobe 1 N/A 186 N/A 186
MB-G10-24-R 1 N/A 30 N/A 30
Wheelock WM3T-24-FR Outdoor Strobe 1 N/A 88 N/A 88
Wheelock RSS-24W-FR Strobe 1 N/A 78 N/A 78
Notification Appliance Totals 4 N/A 382
i
Summary Section
Standby Hrs. Required 60
Alarm Sounding Minutes 5
Total System Standby mA 400
Total System Alarm mA 1048
Total System Standby A/H 24.00
I Total System Alarm A/H 0.09
Min.A/H Battery 24.09
ADD 30% FOR BATTERY DEPLETION 7.23
Required A/H Battery 31.31
A/H BATTERY PROVIDED FOR SYSTEM 34
07/16/98 08:57 P.02
The VISTA-1 00 Series Integrated
Fire and Burglary Alarm Control Panel
I ADEMCO
COMMERCIAL
smarm saVnOhtf
PRIMARY FEATURES
E
■ PATENTED GLOBAL POLLING
TECHNOLOGY
■ SUPPORTS 87 ZONES, a PARTITIONS
■ 12 AND 24 VOLT VERSIONS AVAILABLE
■ WIRELESS,HARDWIRED OR MULTIPLEX
■ KEYPAD MACROS FOR EASE OF USE -
`fir!
■ UL 864 LISTED FOR COMMERCIAL FIRE ��-'•�, �../
■ UL LISTED FOR COMMERCIAL BURGLARY
I ■ SYSTEM STATUS AT A GLANCE
■ FASTER DOWNLOADING pr• op' �•.••�
■ COMMON LOBBY LOGIC it
r SCHEDULING AND RELAY CONTROL
i
■ FALSE ALARM PREVENTION FEATURES
■ SYSTEM DESCRIPTION multiplex systems. it allows the installer to support
The VISTA-100 is a powerful integrated fire and burglary more devices to meet installation requirements
control tfraL incorporates advanced technology while sim• ■ FIRE DETECTION FEATURES
plifying end user operation in even the most demanding •
applications. It otters eight partitions in a UL listed Wireless Smoke Detectors -engineering break-
Commercial Fire and Burglary control panel. it supports through allows use of wireless smoke detectors in full
up to 87 zones using basic hardwired, polling loop and compliance with Commercial Fire Listing UL 864 and
wireless technologies. it also accommodates indicating moots the NFPA 72 requirements. Wireless Heceiver
circuits, phone linos, keypads, RF receivers and relays, 5881 EH must be used for this teature
In addition, the control offers scheduling capabilities and • Automatic Smoke Detector Testing- functional test-
allows defined operodons to be automated. IL is available ing, from the keypad, of all multiplex smoke detectors
in either 12 or 24 volt models, in an automatic sequence, with results stured in the
log, printed on-site or downloaded to a central sts-
■ PA-TEN7Ep GLOBAL FK3WNG Von. In tiie past, the installer had to Wst each detec-
TECiNOLOGY for individually- now testing can be done at the key-
The VISTA•100 supports up to 78 additional zones
pad, saving time and documenting information
using the un•hoord multiplex circuit. Current draw can • Supports 24V, 3.2A Power for 24V ADA Compliant
total up to 128mA. polling loop zones have the follow. Fire Notification Appliances-specify Vista-100-24
ing characteristics: must use RPM (Remote Point, Package (includes control and power supply kit)
Module) devices, supervised by the control panel, ind1- ■ SYSTEM FEATURES
vidua►ly assignable Lo one of eight partitions and individ-
ually assignable to bell outputs and/or aux. relay, • Wireless Expansion_ It supports up to 87 wireless
• Speed -global polling allows information from the Tones using 5881 or 5881EH Fire type HF Receiver ,
on-board, two-wire multiplex circuit to process eight Wireless zones have the following characteristics:
times faster than conventional multiplex systems, -Supervised by control panel for check-in signals
resulting in immediate status and response to off (except certain non-supervised transmitters)
normal conditions -Tamper protection for 5800 series supervised
• Distance -4,0M feet capability without the use of transmitters
shielded cable offers installation flexibility - Individually assignable to one of eight partitions
• Power - twice the power capacity of conventional - Individually assignable to bell outputs and/or aux. relay
ADEIMCO
The Technology Leader
• Keypad Macros-accommodates one keypad macro KEYPAD PANIC KEYS
command per,partition which allows simplified keypad . Accommodates throe keypad panic keys
commands to control complex events
• MasWr Console-status of all eight partitions viewed r KEYPAD MACROS
at a glance. This reduces confusion and provides • Accommodates one keypad macro command per par-
information immediately tition, simplifies usage of partitioned system
• Faster Downloading-30048aud downloading reduces NOTIFICATION APPLIANCE CIRCUIT
processing time by two-thirds, saving time and money • Provides two class 8 supervised notification o uts
due to significant reduction in on-line time P utp
• on die control pane! itself. A 420UL'F Relay Module
Common Lobby Logic -Allows longer exit time for can supply twu additional supervised bell outputs
last arming partition
■ Scheduling and Relay Controls-simplifies end user A AUXILIARY RELAY
operation by automating system functions Provides a built-in Torrn C relay which can be used for
one of the following:
r FALSE ALARM PREVENTION • Alarm activation
FEATURES • Trouble/Supervisory activation
False alai-iris are frequently caused by end users during • 4-Mre smoke detector reset
the exit process. This new control includes several fea- • fiatxery saving feature
tares to help end false alarms due to user errur, r OPTIONAL OUTPUT RELAYS
• Exit: Error Logic- alerts the user and allows for cor- Accommodates the use of 16 relay outputs:
rection in the event an exit door is left open while . Can be prop►aritined to activate in r rsponse to s-ys-
keeping the remaining protection point.; armed: a Lern ravPnts
unique report is sent to the central station • Can be props ammed to activate using time intervals
• Exit Delay Reset- allows for user re-nntry without ■ Can be used for additional supervised bell outputs
causing an alarm (4204CF only)
False alarms are also triggered by application condi- • Can be activated manually
Lions which, when anticipated, can be accommodated. • Can be supervised by control panels
• Cross Zoning - allows for combinations of zones to fault • Can each have an alpha descriptor assigned
before alarm sounds to avoid sensitive trigger reactions
• Alarm Verification - will double-check an alarm condi- N OPTIONAL VISTA INTERACTIVE
Lion before sounding PHONE MODULE
Supports the Ademeo 4285 VIP Module. This permits
w 8 PARTITIONS access to the security system for the following:
Provides the ability to control 8separate areas • Obtain system status information• Arm and disarm security systemindependently, each functioning as if it had its • Control relays
own separate control.
• A "Common Lobby" partition, which can be pro- r ACCESS CONTROL
grammed to arm automatically when the last partition If programmed, provides users with a command which
that shams the common lobby is armed and disarm activates a relay for two seconds to open access doors
when the first partition that shares the common (e.g. lobby door). Each partition can be assigned an
lobby is disarmed access control relay.
A USER CODES ■ EVENT LOG
• Accommodates 128 user cndas, all of which can Keeps a log of different event typos (enabled in pro•
operate any or-all partitions gramming):
• SLaivs a total of 224 events
0 PERIPHERAL DEVICES • Can be viewed tit the keypad or through the use of
Supports up to 16 addressable devices, which can be V-Link software
any combination of keypads(S 139(R), [IF receivers • Can be used on a serial printer
(4281/5881/5881 EH), and relay modules ■ SCHEDULING
(4204/4204CF), Peripheral Deviccs have the following Provides tin following scheduling capabilities:
Characteristics: • Open/Close schedules (for control of arming/disorm-
• Terminated at the Keypad Port 1 terminals on the ing and reporting)
control panel (excopt for Uie uric alpha keypad, which . Holiday schedules (allows different time windows for
must be connected to Keypad Port 21 Open/Close schedules)
• Each device is set to nn individual address (physically) • Timed Events (for activation of relays, auto-bypassing
according to the device's instructions and unbypassing, auto-arming and disarming,etc.)
• Each device enabled in the system using die Device • Access schedules (for limiting system access to
Programming Mode users by time)
07/16/98 08t58 a P. 84
f
UAW
ktL OV7PUtsi� 7AUY IRIA;'I t r,Iff"A71OAT., lo�t r��A &.me$ �����i� ROtt
E t � "
aop&. htON14AOK
t i b s
r K alit Ofll C IYA M Orn YY 4
1tP107E XXIFAC'j;
i1�7AD j( � Y Y rouim
N, it71f,U
LOOP
m7r t -
t 4 ~
+ t
GA38 .twr
&VM t/M
NC KC N.0 KG N.G N.G N.C.
C4RTN OAdtso
■ WIRING DIAGRAM NX4
gK0. N O N O KO. N.O. KQ N.Q N.Q.
P X „, A a 2k yt ryq
fi
I TO OTHER OMOE6
• End User Output Programming mode (provides 20 ELECTRICAL
f timers (or relay control) VOLTAGE INPUT: 12VOC
CURRENT DRAIN. 1 UOrnA
■ SPECIFICATIONS INTERFACE WIRING FOR KEYPADS
CONTROL DIMENSIONS 1S' H x 14.5" W x 4,3' D RFD: 12VOC input (+) auxiliary power
ELECTRICAL SPECIFICATIONS BLUE: Nut Used
PRIMARY POWER: GREEN: Data to control panel
- For 12V systems- 1451 transformer witli enclosure; YELLOW.' Data from controf panel
rated 16VAC, 72VA BLACK Ground and (-) connectinn from supplemental
- For 24V systems- 1451.24 transformer with enclosure; Power supply
rated 30VAC, 188VA ■ ACCESSORY EQUIPMENT
BACKUP BA77ERY MODULES
-For 12V systems- 12AH min. to 34AAH max, lead 514COLM: Dialer module
acid battery(gel typo) 4146: Keyswitch
-For 24V systems-2.12V, 7AH min. to 17.2 AH max. 514CLED. Communicator status
lead acid battery(gel type) 41OOSM: Serial module
ALARM POWER: 12VDC,1.7 emps max MANUAL PULL STATIONS
AUX, STANDBY POWER. 12VUC. 1 amp max 5140MPS 1: Manuel fire alarm station, ADA
T07AL POWER: Combined auxiliary standby and alarm Compliant, key reset, terminal block, gold
currents must not exceed 2.3 amps contacts
Manual fire alarm station, ADA
STANDBY T/TIME: 24 hours, or 60 hrs. depending on 514OMPS•2.
battery site and load Compliant, alien reset, wire leads
5940MP�86: Surface back box for 5140MPS-1 and
FUSING: Battery input, auxiliary and hell power outputs SurfOMNS 2
are protected using PTC circuit protecturs. All outputs CONSOLES
are power limited 6939 Console: English text ,grey
AGENCY LISTINGS 039R Console: English text-red
BURGLARY, UL 808 Grade A Local Mercantile ADDRESSABLE SMOKE DETECTORS
Premises and Mercantile Safe and Vault. UL 611/ 4192CP. Ionization
UL 1610 Grades A, AA Central Station, UL 365 4192SO; Photoelcctronic
Grades A, AA Police Connect 4192SDT Photoeleetronic wiUr thermal
FIRE: UL 864-NFPA 72 Local Central Station and ADDRESSABLE PIR/MOTION
Remote Station 4275.• Multiplex addressable PIR
COMMUNICATION FORMATS 4278. Multiplex addressable Quad PIR
Ademco high speed, Ademco 4+2 express, Ademco low ADDRESSABLE GLASSBREAK/SHOCK
speed,Ademco contact ID,Sescoa,Radionics low speed 7507.- Multiplex glassplex glassbreak detector,
LINE SEIZE. Double Pole 9500: Multiplex audio and shock detector
RINGER EQUIVALENCE.-0.78 CONTACTS
FCC REGI;,TRATION NO.:AC398U68192-AL-L 4194WH,- Surface reed cuntnct
6139(R) REMOTE KEYPAD DIMENSIONS 6.25"W X
4.75" H X 1.25" D
ADEMCC3
The Technology Leader
EXPANSION DEVICES
419(M R Puint,mpansiun module nne point 14CV.. lonizatiun, drrecL wire
4208: Point expansion mudule eight points �`'4b I DH: Photoelvctronrc duct detector witit
COMPATIBLE TWO-WIRE SMOKE DETECTORS UI 4400 base
21CX1 Low profile phrrtoelectrruric 1451011. Ionization duel.detector with OH400 base
P IMT. I ow prvfilr phoioulrcxronic with heat BEAM DETECTOR
11M Low prorile iuriiretion 1401. FinF.RAY Optical Ueam Deteraor 2RVUC
1151: Low profile ionization (uses 1311OLP base
151: Low prohir. phowelectronic (uses L3110L('base) E (,)fl[)t 12fNG 1N1 UtdMAi'I(1iV ni ia ': Bean for 1151 and 2151 VISTA-IUU: it vnc:Power 2.3A
.?400.• Phntoelectrvnic direct wire 111ST44COP& 12V Flurylary P.;►A
P_400TH Plintnelectrunic with bent, direct wire 24V fire J.2A for how
Not,ficuLiun Appliance!;
ARCHITECTURAL & ENGINEERING SPECIFICAI-IC)NS
VISTA-100 Fire and 0urglary Control
This conWactor shall furnish and install an integrHt- correction in the event an exit door is left open
ed fire and burglary conllwl. (Specify Vista-100 for while; keeping Uie remaining protection points
12VUC applications. Vista•100-24 for 24VDC in& armed; a unique mport is sent to the curitral
eating circuits), The unit, shall be UL 864 listed for station
commercial fire and burglary applications. The • Exit f7clay Reset, - allows for user re-entry witil•
control communicator supports 8 standard fully out Causing an elarm
programmable style B initiating circuitt. Provido an • False alarms are also triggered by application
onboard 2-wire multiplex circuit using,Giobal renditions which, when anticipated, can be
Polling technology. The multiplex cli-Q shall accommodated
extend zone capacity to 87 zones uslq rnt4grated • Cmss Zoning - Allows for combinations of zones
addressable devices such as passive in{rared motion to fault before alarro sounds to avoid sensitive
detectors, glassbreak sensors, addresbhblt'.conwct trigger reactions
devices and addressable smoke detecwrs.,Each • Alarnr Verification - Will double-check an alarm
addressable device shall report alarn5s, troubles condition before: sounding
arid rostoral signals to the rentr`al,styrofj.;`using Tlie control communicator shall support the
Ademco contact ID trdnSmission fdrirat:'•. following
:
The control communicator shall:prgyiri ;`>ip to 8 • Keypad Macros - Allows nirnplified keypad com-
par tit.ir,ns and support wireless fir`9,660-bprglary mands to control complex events
devices defined as the Ademcd 58t6:1eraes using • Master Console - Status of all eight partitions
Ademco narrow band technology. 1 • viewed at a glance - reduces confusion and pro-
Provide scheduling capabilities and support up to vides information immediately
16 relays to control remote devices ar in • Fust Downloading - 300 Waud downloading
on the plans. The units shall also support-schodul- reduces processing time by Lwcrthirds to reduce
ing of everils within the control and associated on-line time
part.lt;ions. • Common Lobby Logic - Determines the stat.trs of
all partitions and extends the exit time for the
The Vista-100 (Vista-100.24) shall have•fine cape- last person leaving
bility to automatically test multiplex smoke detectors. • V fireless Smoke Detectors - Us2 of wireless
Automated Smoke Detector Tearing functional ;smoke detecLr,rs in full compliance with cvrtimer-
testing, from the keypad, of all multiplex smoke vial NFPA 72 requirements
detectors in an auto m Uc sequence, with results I he control will support on site programming ur
stored in the log, printed on-site or downloaded to remote hrinlromming through the downloader via
a central station. Lelephorid lines using IBM compatible PC operating
Provide the following false alarm prevention teatures: Adefrico V-Link download software and a Hayes
• Exit, Error Logic - alerts the user and allows for modem.
I/v 1rolU5 The 'lochnology Lcader
VISUM100
f C.AI ti4E7r ClAL SYMFNL9 INVISION Commercial Fire and
An ADEMCO Group Company Burlary Alarm
Control System
VISTA-100: Features Q.E.D. programming for quick enrollment
i
Redefining the Standards
i
i
TVISTA-100 is redefining the standards
for life and property protection. A powerful integrated
fire and burglary control delivers sheer innovation by
incorporating ADEMCO's proven hybrid system,;
technology while simplifying end user operation in even '
the most demanding applications-.
The alarm control offers eight-partitions in a UL listed
Commercial Fire and Burglary control panel supporting
up to 87 zones using hardwired, QED compatible
wireless and V-Plex technologies. It also accommodates K .,
indicating circuits, digital dialers, keypads, RF receivers
and relays.
In addition, the control supports scheduling capabilities
and allows defined operations to be automated by
pressing a single keypad button. The VISTA-100 is
available in 12V and 24V models.
With its advanced standard feature sets, this powerful, integrated fire and burglary control is as easy to install as
it is to use. Higher processing power and improved system reliability mean fewer false alarms.
Key Features: ♦Two bell outputs
♦Eight zones standard ♦Auxiliary Form "C" relay
♦Expandable to 87 zones ♦Supervised Dialer Circuit
Hardwired, wireless and V-Plex technology ♦Supports major communication formats
128 user codes ♦Seven trigger outputs i
♦Eight partitions ♦UL commercial fire and burglary listed
224 event log capacity ♦Available in 12V and 24V versions
Seven authority levels
+Temporal Code Compliant c
The information contained is intended to be up-to-date and accurate.All IS09c01 Engineering and Manufacturing
specifications are subject to change without notice.For more information, Quality Systems Certified to
contact us at 800-6,15-5,130 or visit our rlebsite at http:,lwww.ademco.com International Standard ISO.9001
h'
4FfflW
C VI�T -1UU
C0fV1MEaCIAL SYSTE IS DIVISION Commercial Fire and
An ADEMCO Group Company Burglary Alarm
Control System
Burglary: Passive Infrared Detectors:
— UL609 Grade A Local Mercantile Premises and —4192 998MX, 4275EX, 4287EX-SN
Mercantile Safe and Vault Contacts:
— UL611/1610 Grades A,AA, Central Station — 4194WH, 4939SN, 4944SN, 4959SN
— UL365 Grades A,AA Police Connect Glass Break Detectors:
Fire: — 7500, 9500
— UL864/NFPA72 Local, Central Station VISTA Interactive Phone Module:
and Remote Station — 4285 VIP Module
—Factory Mutual Optional 24V Power Supply:
California State Fire Marshall — PS24-24V Power Supply
MEA a Long Range Radio:
COMPATIBLE DEVICES 7720-Long Range Radio
Auxiliary Devices: Software:
—6139R-Red alpha keypad —Compass Downloader-Windows Compatible
5140DLM-Backup dialer module —V-Link- DOS Downloader
— 514OLED-LED annunciator module Wireless Devices(for used with QED control panels
—4204- Relay module only):
—4204CF- Relay module — 58048D-Bi-directional Key
— 5881 EH - RF receiver supporting 5800 wireless — 5808-Wireless Smoke Detector
detectors — 5816- Door/Window Transmitter
— 6220S-System Printer used w/4100SM serial module — 5804- Transmission Module
Two-Wire Smoke Detectors: — 5827BD-Bi-directional Keypad
— 2100 Series Photoelectric — 5890-PIR
— 2400 Series Photoelectric —5849-Glass Break Detector '
— 1100 Series Ionization —5819-Shock Sensor
Four-Wire smoke Detectors: ORDERING INFORMATION
— 2112124 Series Photoelectric '
— 1412 Series Ionization ,- Part No. Description
Horn/Strobes: VISTA-100 Commercial Fire and Partitioned
— HS121575 Burglary Alarm Control
— HS241575 VISTA-100-24 Commercial Fire and Partitioned
— H1224 Burglary Alarm Control 24V
— S121575 Model
— S241575 VISTA-100-PAK1 12V Power Pak consisting of;
Manual Pull Stations:
— 5140MPS Series, MPS-5, MPS-10 VISTA 100, 6139R, 5140DLM
V-Plex Devices: VISTA-100-PAK2 24V Power Pak consisting of.
— 4208U Loop Expansion Module VISTA-100, PS24, 6139R,
— 4209U Group Zoning Module 5140DLM
— 4190WH Remote Point Module
— 4193SN Two Zone Serial Interface Module
— 4293SN One Zone Serial Interface Module
— 4297 Isolation Extender Module
Smoke Detectors:
— 4192 Series, 5192 Series
165 Eileen Way, Syosset, New York 11791 - Copyright 00 1998 Pittway Corporation
ADEMCO is an IS09001 Registered Company. C3 Fz� C) U h
UVISTA100/D 6/98
CONTROL PANELS
E
i
{ _
.. ++JJ
i
...... 4� �M�'
s.� "� . �.......... ... .
E
i
t
E
4297 V-PLEX LOOP EXPANDER & ISOLATION MODULE
f
Manual Pull Stations
MPS-1'
MPS-2•
MPS-5'
MPS-10•
'uaa Yd4193SN
Glass break Detectors Mini-Zane Module
t
Tamper Switch'
5681 Series Flow Switch'
5881 EH Receiver Wireless Receiver j42
ZN Module
E (Max�) Low Temp Switch'
iv, al
32characret Red•Aloha�'adCommercial" 420SU 8 Contact
Wireless Group Zone Module
Devices emote Zone t
pZone 2
rograrnmable / ule Zone 3
®� Zone 4
Zone 5
Zone 6
Zone 7
Supervised Relay Zone 8
or NAC(Bell)circuit
E
Due to the power of the VISTA 100, future data grade,so existing wiring may be
expansions of security and fire can be utilized. For areas that contain asbestos
accomplished with a minimum of cost. the wireless smoke detectors and
The VISTA 100 operates with one of the security devices offer the solution.The
widest peripheral product lines available 4209U provides a quick method to tie
in the marketplace today,allowing it to into existing compatible two and four
meet virtually any application. wire conventional detection circuits,that
options to save valuable installation dme. PARTITIONED SYSTEM FLEXIBWTY can later be upgraded to addressable
detectors if desired.
j Conventional two or four wire detectors The VISTA 100 provides the ability to
I can be powered by the main control panel control eight separate areas LABOR SAVING SOFTWARE
or remotely on a V-Plex 4209U Group independently,each functioning as a Ademco's powerful"Compass"software
Zone Module. By using the 4209U larger private control system. This can greatly makes programming the VISTA 100 both
detection applications can be met by expand the panel's protection capacity, simple and quick,via modem or direct
using multiple conventional detectors for therefore reducing equipment and labor download.This software also provides
larger areas,such as hallways or storage costs. This powerful feature allows end the operator the ability to remotely view
areas, that do not require individual point users to disarm certain areas while the entire system 5 status, from a remote
addresses. leaving others protected,or to limit location, should the need arise.This
Sometimes there are areas where both access to certain locations to specific information can be used to determine
conventional zone and V-Plex wiring individuals. what response and equipment will be
cannot be accommodated due to physical RETROFIT APPUCATtONS required for system restoration prior to
construction or even aesthetics. This is the technician arriving on the scene.
sere QED compatible wireless security Due to its diversity, the VISTA 100 is
d UL Listed fire devices provide the uniquely suited for this arena. The V-Plex
ultimate solution. polling loop does not require any special 6
j wiring, such as shielded, twisted pair or
CONTROL PANELS
�' 'E: ATE � � 'BRGL.ARY IL.ARlil
a.,,,,,:,:, ,., ..�:.,.� �,,,,.<.: .. ,;,> pit - .:..: .h .r >"„x ..:%.=%''--• -•--+., .-+,�+.. -o-,-'^^�---.�«ar.
06
x�
milli;INN
5192SOT 5192CP
5192CP
I I o
cn c
'R'�oi o f
0 a gyp, l o n c] 'la g.
4193SN 42081.1 4t93SN
2 NOTIFICATION (BELL) APPLIANCE CIRCUITS V-Plex Loop 5881 EH Receiver
i
HORN/STROBES/BELLS VISTA 100
tic-
0 Q I_
J
KEY FEATURES. �8 CLASS B HARDWIRE ZONES
• EIGHT ZONES STARDARD
• EXPANDABLE To 87 ZONES/POINTS Key-itch 514o LED Communicator
option Status Module
• HARWIRED, QED COMPATIBLE WIRELESS & V-PLEX 4146
TECHNOLOGY 51400 0 l
• EIGHT PARTMONS • •
• TWO NOTIFICATION (BELL CIRCUITS) 4100SM
• TEMPORAL CODE 3 COMPLIANT prfr 0 Addhicnal Not`'
• 224 EVENT HISTORY CAPACITY RS232 Interface Module "sing 42C4 c
• SUPPORTS TWO AND/OR FOUR WIRE SMOKE DETECTORS 6220SPrirtter
• UL 864 LISTED FOR COMMERCIAL Ph,,m line to Contrd Statm
• WIRELESS SMOKE DETECTORS
772011LF Lony Ran a Rr
• UL COMMERCIAL FIRE DETECTORS 9,,,�
• AVAILABLE IN 12V AND 24V VERSIONS
VISTA 100 SERIES CONTROLS - THE integrated system. The combination of unique ability to be adapted to virtually any
SOLUTION TO COMMERCIAL FIRE & these proven technologies provides the facility's environment by utilizing its
SECURITY widest available flexibility in total facility combined technologies,Its V Plex polling
protection from one sophisticated loop is a two wire circuit that gives exact
Ademco offers the first commercial fire platform. point or zone identification that can be wirer+
and security system that combines in almost any configuration. The V-Plex
hardwired, V-Plex addressable polling NEW INSTALLATIONS loop's ability to be T-tapped can minimize
5 loop and QED compatible commercial The VISTA 100 Series Panels saves both wire runs, providing the installer more
wireless fire detection in one seamlessly time and material installation costs with its
f
'... ..
xi
t j ofV�� i In'�� ' i
i
E
i
VISTA-100 INTEGRATED FIRE AND BURGLARY ALARM
CONTROL PANEL -
i
I
The VISTA-100 and VISTA-100-24 are powerful integrated fire and burglary
[ controls that incorporate advanced technology while simplifying end user
operation in even the most demanding applications. The VISTA-100 now features
QED programming for quick enrollment of wireless devices
How To ORDER: ■ Supports eight hardwired zones, 79 V Plex zones/points or 87
VISTA-100 QED compatible wireless zone/points and eight partitions
VISTA-100-24
for 24V ■ Functional smoke detector walk test mode
Applications ■ UL864 Listed and NFPA 72 compliant for commercial wireless
fire installations when using the 5881EH wireless receiver and
j QED compatible 5808 wireless smoke detectors (Residential
wireless is also available)
■ Two programmable notification appliance circuits support
temporal code 3
■ UL Listed for commercial burglary A and AA
A� ■ Keypad macros for ease of use by single button operation
■ Master console shows status of all partitions at a glance
VA0 -t?A4C ■ System can be installed on existing wiring U
PowerPak Includes: ■ Operates two-wire and/or four-wire smoke detectors
6139R y p b APPROVED
Vista-100 Control, ■ Common lobby logic provides for easier egress
Keypad &�i�DL;v1 Dialer ■ Scheduling and relay control for facility management
M EA
■ SIA false alarm prevention features
13 0 12V and 24V versions
COnrMOI PANELS
Highly advanced VISTA-100 offers a host of standard features not
found in ordinary controls. These features and benefits provide high —
quality protection at competitive prices. What you will find standard
in this control panel are:
■ Patented Global Polling Technology
The VISTA-100 on-board, two-wire V Plex circuitry provides:
• Speed -processing of alarm data and status, eight times
faster than conventional mux systems
• Distance - 4000 feet capability using standard fire rated wiring
• Power- twice the power capacity over conventional systems
allowing for greater overall total points of protection
■ Fire Detection Features
The VISTA - 100 offers leading edge technology in life and
property protections:
• Commercially listed QED compatible wireless smoke
detectors - engineering breakthrough allows use of wireless
smoke detectors in full compliance with UL864 and meets
NFPA72
•Automatic smoke detector testing - functional testing directly
from the keypad of V Plex smokes in an automatic sequence.
Results may be stored in log, printed on-site or downloaded
to central station
■ Unwarranted Alarm Prevention Features
The VISTA-100 includes several features to help end false
alarms due to user error and application conditions:
• Exit delay rest - allows for user re-entry without causing alarm
• Cross zoning - allows for combinations of zones toy ,
fault/alarm before alarm sounds to avoid sensitive trigger ! PowerPak Includes:
Vista 100-24 Control, 6139F
reactions Keypad & 514ODLM Dialer
•Alarm verification - will double-check an alarm condition Module
before sounding alarms
14
APPENDIX D
K
W
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VISTA-100 CONTROL
Physical: 18"H X 14.5"W X 4.3-D
Electrical:
Primary Power: From ADEMCO No. 1451 Transformer with enclosure: rated 18VAC, 72VA
Backup Battery: 12VDC, 12AH min. to 34AAH max. lead acid battery (gel type)
Alarm Power: 12VDC, 1.7 amps max. for each bell output
Aux. Standby Pwr: 12VDC, 1 amp max.
Total Power: Combined auxiliary standby and alarm currents must not exceed 2.3 amps.
Standby Time: 24 hours with 1 amp aux. standby load or 60 hours with 205mA aux. standby load using 34AAH
battery
Fusing. Battery input, auxiliary and bell power outputs are protected using PTC circuit protectors. All
outputs are power-limited.
Main Dialer:
Line Seize: Double Pole
Ringer Equiv.: 0.7B
I FCC Registration: AC398U-68192-AL-E
j TLM Threshold: Good line when tip-to-ring voltage is greater than approx. 25V(13V when blue jumper cut) or
when handset current is greater than approx. 10mA.Bad line when both voltage and current are
i
below these levels.
Formats: ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed,ADEMCO Contact ID,
Sescoa, and Radionics
Agency Listings:
Burglary: UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault
UL611/UL1610 Grades A.AA Central Station
UL365 Grades A, AA Police Connect
i
Fire: UL864-NFPA 72 Local, Central Station, and Remote Station
i
I
5140DLM BACKUP DIALER MODULE
Physical: 2.75"H X 4"W X 1"D
Mounts on VISTA-100 main PC board shield using standoffs supplied.
j Misc.: Connects to VISTA-100 main PC board J3 header using ribbon cable supplied.
FCC Registration: AC398U-62668-MO-N
5140LED ANNUNCIATOR MODULE
Physical: 4.5"H X 2.75"W X 1.5"D
Mounts to single-gang electrical box.
Indicators: AC Power, Comm Failure, Dialer 1 Fault, and Dialer 2 Fault.
Connect indicator inputs to VISTA-100 trigger outputs (J2 header)
Appendix D-1
VISTA-100Installation Instructions
DIGITAL COMMUNICATOR
Formats Supported:
ADEMCO High Speed
ADEMCO 4+2 Express
ADEMCO Low Speed
ADEMCO Contact ID
Sescoa
Radlonics Low Speed
Line Seize: Double Pole
Ringer Equivalence:0.713
FCC Registration No.: AC398U-68192-AL-E
6139(R) REMOTE KEYPAD
Physical:
Width: 6.25 inches
Height: 4.75 inches
Depth: 1.25 inches (6137= 1 inch)
Electrical: Voltage Input: 12VDC
Current Drain: 100 mA: reduces to 40mA when control is operating in standby mode from backup
battery only.
Interface Wiring for Keypads:
RED: 12VDC input (+) auxiliary power
BLUE: Not used
GREEN: Data to control panel
YELLOW: Data from control panel
BLACK: Ground and (-) connection from supplemental power supply.
Appendix D-2
o
1151 and 2151 F-500
Low-Profile Plug-In Photoelectric
and Ionization Smoke Detectors
Section: Conventional Initiating Devices June 30, 1998
GENERAL
The System Sensor 1151 and 2151 are low-profile ionization and p A c A M
photoelectric, plug-in type smoke detector heads. They offer su- ® L �V�CM
perb performance and reliability,meeting the stringent performance 205-94-E
criteria designated by UL 268 and ULC,in a profile of just 1.66"(42 S911 OX5A4.AY
mm). Aesthetically pleasing to engineers,architects,building own-
ers and homeowners, the 1151 and 2151 can be used with four California
State Fire
I different adapter bases in a variety of wiring configurations and Marshal
voltages. Model 1151 (ionization sensor)and 2151 (photoelectronic ^ J 7271-1209:157(1151)
sensor)share the same sleek low-profile design. 7272-1209:159(2151)
FEATURES
• Sleek, low-profile design—only 1.66"(42 mm).
• Same aesthetically pleasing housing design for ion and photo �+
( models. � lY°
E • Two LEDs blink in standby mode, providing 360°visibility.
(
• Low standby current. ( ' ., w .
• Field sensitivity metering of detector to meet NFPA 72 require- x F
ment. ' f
• Broad range of adapter bases available—four different voltages/
wiring configurations.
• Removable cover for field cleaning. -
• Sealed against back pressure air flow,dirt and insects.
• Built-in tamper resistant feature. °
• Built-in magnetic test switch. 1151 shown with
• Head easily plugs into adapter mounting base. --- x flange-style base.
• Remote LED option.
'• Listed to 2151 shown with
UL 268. .-� flangeless base.
• Auxiliary relay contacts(optional).
CONSTRUCTION AND OPERATION
The 1151 Ionization smoke detector contains a unique single- Sensitivity: 1151: 1.9%t 0.62%/ft. 2151:3%t 0.7%/ft.
source dual-chamber design which will sense the presence of smoke Weight: 3.6 oz.(102 g).
particles produced by fast combustion as well as slow smoldering Size: 1.66" (42.164 mm) high; 4.1" (104.14 mm) diameter for
fires. This chamber exhibits increased stability,significantly reduces unflanged base; 6.1"(154.94 mm)diameter for flanged base.
nuisance alarms,and provides better performance at higher veloci- Construction: Flame-retardant thermoplastic.
ties.
The 2151 Photoelectric smoke detector contains a unique Temperature: 32°F to 120OF(0°C to 49°C).
optical sensing chamber designed to sense the presence of smoke Humidity range: 10-93% RH non-condensing.
particles produced by a wide range of combustion sources. A cus- Air velocity: 1151 ton: 0—1,200 ft.(365.76 m)/min. 2151 Photo:
tom integrated circuit incorporates signal processing to help reduce 0—3,000 ft. (914.4 m)/min.
false alarms. A MOUNTING BASE SELECTION GUIDE is included on page 2 of
The sensing chambers of both models are sealed from back pres- this document.
sure air flow, dirt, and insects. The chambers are protected by a JUNCTION BOX SELECTION GUIDE: Box depth is contingent on
fine mesh screen which can be cleaned or replaced. Additional key base and wire size. Refer to National Electrical Code or local appli-
features include interchangeable ion and photo heads,a variety of cable codes for appropriate recommendations. Base B401 can
mounting bases, and a full line of accessories. utilize a 50 mm or 60 mm junction box. Bases B11OLP/RLP can
GENERAL SPECIFICATIONS utilize a single-gang, 3-1/2" (88.9 mm) octagonal, 4" (101.6 mm)
octagonal,or 4"square junction box. Bases B112LP and B116LP
Operating voltage/alarm current: mounting base dependent(see can utilize a single-gang,3-1/2"octagonal,4"octagonal,4"square,
chart on page 2). 50 mm,60 mm,or 75 mm junction box. Base B114LP can utilize
Standby current: Ion(1151): 40 pA. Photo(2151): 85 pA. a 4"octagonal or 4"square junction box.
This document is not intended to be used for installation purposes. We try to keep our product
information up-to-date and accurate. We cannot cover all specific applications or anticipate all
requirements. All specifications are subject to change without notice.For more information,contact:
Security Services Inc. One Town Center Road,Boca Raton,FL 33431
y Phone: (561)988-3600 FAX: (561)988-3675 Made in the U.S.A.
DA-46617 — Page 1 of 2
PRODUCT LINE INFORMATION
Model Description XP-4 Extension pole for XR-2. Comes in three five-foot sec-
1151 Low-profile ionization detector(requires B100LP tions.
Series base).
2151 Low-profile photoelectronlc detector (requires (-)
B100LP Series base). () () -
B110LP Base,2-wire, low-profile flangeless, 12/24 VDC. OPTIONAL PA40OZ OPTIONAL o
B112LP Base,4-wire, low-profile, Form-A&-C, 24 VDC. RAaooz ; (.) 2 0 2 U)
B114LP Base,4-wire,low-profile,Form-A&-C+A Super- 3 03(_) W
cc
visory, 120 VAC. (+) 1 4 (+) 1 4 0
B116LP Base,2-wire, low-profile, Form-C,24 VDC. (+) (+) w
RA40OZ Remote annunciator for two-or four-wire systems,
3 - 32 V. Use with ion and photo plug-in detec- (+) (+)
tors. Fits standard single-gang electrical box.
I
B401BH Sounder base. Requires an external 24 VDC ------------------TIONA -F "-'--"""--RAN WI-RING------------------' '
q -----------OPTIONALFAULTTOLERANT------- - ---------
power supply. Mounts to a 4"(101.6 mm)square
electrical box (1-1/2" [38.1 mm] minimum depth, ♦ B110LP/RLP or B401
2-1/8"(53.975 mm]recommended). EOLPOwER
Wiring Diagram SUPERVISION
MOD40OR Detector sensitivity test tool. Use with most ana- RELAY,A77-7168
log or digital multimeters. Satisfies NFPA 72 re- (+) RED (+)
quirement for sensitivity testing.
SMK400 Surface-mounting kit provides for entry of surface PURPLE
wiring conduit. Use with B401 or B401 R mount- r- -- - ""
ing bases only.
A77-716B End-of-line relay for power supervision,12/24 VDC RA40OZ RA40OZ '
systems. (o`noNAL) (OPTIONAL)
M02-04-01 Test magnet. () \ (-) ()
3 14 10 3 BLK ¢
XR-2 Detector removal tool. Allows installation and/or
removal of 100 Series detector heads from base (+)2 130 COM (+ 2 tam COM o
in high ceiling installations when used with the 11 N.C.OA 10,,I2 2 N.C.N. ir
XP-4. (-) a AUXILIARY
CONTACTS AUXILIARY w
CONTACTS a
120 VAC 120 VAC a
9 6 RA40OZ 6 ALARM CIRCUIT
(y �c (OPTIONAL)�q
"so ( 3® (� 3® ♦ B112LP Wiring Diagram
-------------
¢4 4 20
140 COM 20 140 COM (+)
123 N.C. 123 N.C. EOL
(+) 00 6 7 1 tt N.O. (+) 0 6 7 1 n N.O. RESISTOR
a AUXILIARY AUXILIARY 3 3
FORM C FORM C & ------------
CONTACTS CONTACTS 21® is 2 0 L4 a
COM COM
¢ 13 N.C. 13 N.C. '
SUPERVISION CIRCUIT t 2 ;
N.O. 12 N.O. AUX.
o N AUXILIARY
w CON-
W CONTACTS TACTS ; I
--------------- ------ -- -------------------------------------------------
ALARM __ OPTIONAL NFPA CLASS'A'WIRING ;
CONTROL ALARM CIRCUIT ----------------------------------
----------------------------
PANEL .....
♦ B116LP Wiring Diagram
♦ B114LP Wiring Diagram Base Loop Current Alarm Nominal Current Draw
Model Type Limit Contact Voltage on Alarm(mA)
Number Resistor Type
MOUNTING BASE ' B11OLP 2-wire' No = 12124 VDC 10 to 100"
SELECTION GUIDE B11ORLP 2-wine' Yes 24 VDC 22 to 62
'Functionality contingent on panel compatibility. B112LP 4-wire Yes Form-A&-C 24 VDC 14 to 39
"Must be limited by control panel.
'Flangeless base. B114LP 4-wire Yes +A Supervisory 120 VAC 75 mA AC
mum
RELAY CONTACT RATINGS: resistive or Inductive
(60%power factor)load. Form-A: 2.0 A at 30 VAC/ B116LP 2-Wre' No Form-C 24 VDC 12 to 100"
DC. Form-C: 0.6 A at 110 VDC;2.0 A at 30 VDC;
1.0 A at 125 VAC;2.0 A at 30 VAC. 6401— 1 2-wire' No — 12124 VDC 1 10 to 100"
Page 2 of 2 — DA46617
j,
f
P
i
E F-800
0 H O-600
Heat Detectors
C
Section: Conventional Initiating Devices April 2, 1998
GENERAL California
State Fire
The HD-600 Heat Detector is attractive, durable, and features �L UL� : Marshal
combination rate-of-rise and fixed-temperature detectors. Heat 7270-0075:168
detectors are available in 1350F(57°C)and 200°F(94°C)tempera- S2517 ML361 �/�
lure ratings. (except HD622) ■�■EA
Rate-of-rise elements detect heat by quickly responding to rapid 250-94-E
temperature increase. HD-600 detectors use the same reliable ON3A8.AY(HD621,HD601,HD602)
pneumatic rate-of-rise element used in former models, but offer F M OF4A3.AY(HD603,HD604)
added aesthetic appeal. The pneumatic rate-of-rise element re- 0F4A3.AY(HD622,HD623)
sponds to a rapid rise in temperature,approximately 15OF(8°C)per
OF4A3.AY(HD624)
i minute, by expansion of air within the sealed chamber faster than
it can escape through a calibrated vent. The resultant increase in
pressure depresses the diaphragm, causing the electrical contact
to close the circuit. HD-600 rate-of-rise units have a wide spacing
i allowance of 50-foot(15.24-meter)centers. See Specifications table
I
(page 2)for details.
Fixed-temperature elements react to heat by responding to a spe-
cific temperature setting. The fixed-temperature element uses a
fusible alloy. When activated,the external heat collector drops away
to provide quick visual confirmation that the element has operated.
The units protrude only 1-3/8"(34.925 mm)from the ceiling surface
with a junction box mounting. Theyfnve pleasing contours and an
all-white finish that conforms to cejling aesthetics.
r.
FEATURES
• Rate-of-rise and fixed-temperature.
• One-or two-circuit, normally open.
• Easy installation.
• Low-profile design. —
• Visual indication. �—4-9/16"
1-3/8"
• Operation testing.
3-1/4"OR 4"OUTLET BOX
�OR 4"SQUARE BOX HD-600
INSTALLATION surface MOUNTING
Each detector includes a patented reversible mounting plate. In mounting.
E one position, it easily attaches tD a 3-1/4" (82.55 mm) octagonal ®REERSIBLE
box or 4" (101.60 mm)junction box. UNTING
In reverse,the plate can be used for open wiring without a junctionLATE
box. A 1/4"(6.35 mm)space between detector and mounting sur- P �oface allows for wire connections. All mounting screws are con-
cealed. � �to
The detector attaches simply to the mounting plate with a push and32" l8-32"
rountwist motion. No special tools are required. SCREEWS d flat head
5/8 to 1" WOOD
The mounting plate is molded of white self-extinguishing thermo- SCREWS
plastic rated at 105°C. The plate is extremely strong,yet adapts to
uneven mounting surfaces.
o
JUNCTION BOX CEILING SURFACE
MOUNTING MOUNTING
This document is not intended to be used for installation purposes. We try to keep our product
information up-to-date and accurate. We cannot cover all specific applications or anticipate all
requirements. All specifications are subject to change without notice.For more information,contact:
1750 Clint Moore Road,Boca Raton,FL 33431
Security Services Inc. Phone: (561)988-3600 FAX: (561)241-1923 Made in the U.S.A.
DA-46530 — Page 1 of 2
HD-600 SERIES TESTING METHODS
• Models HD-601/HD-621 and HD-602/HD-622 can be tested by the application of quick heat from any convenient source. A
portable hair dryer is recommended. However, do not apply heat that exceeds the fixed-temperature rating of the detector.
• Models HD-603/HD-623 and HD-604/HD-624 cannot be tested. However, the fusible alloy element is generally considered so
reliable that testing is not necessary.
SPECIFICATIONS
HD-601 & HD-621 HD-602 & HD-622 HD-603 & HD-623 HD-604 & HD-624
0 •
No marking. Gray ring. • Gray spot. O Black dot on white. O
Model HD-601 (one circuit) Model HD-602 (one circuit) Model HD-603(one circuit) Model HD-604(one circuit)
Model HD-621 (dual circuit) Model HD-622(dual circuit) Model HD-623(dual circuit) Model HD-624(dual circuit)
Rate-of-rise and Rate-of-rise and Fixed-temperature only Fixed-temperature only
fixed-temperature fixed-temperature 135•F(57•C). 200•F(94•C).
135•F(57•C). 200•F(94•C).
Application: normal Application: normal Application: unusually violent Application: unusually violent
temperature fluctuations and temperature fluctuations and temperature fluctuations and temperature fluctuations and
ceiling temperatures not ceiling temperatures ceiling temperatures not ceiling temperatures
exceeding 100•F(38•C). exceeding 100•F(38•C)but exceeding 100•F(38•C). exceeding 100•F(38•C)but
not 150°F(66•C). not 150•F(66•C).
Maximum spacing allowance' Maximum spacing allowance' Maximum spacing allowance' Maximum spacing allowance'
UL: 50 ft.x 50 ft. UL: 50 ft.x 50 ft. UL: 25 ft.x 25 ft. UL&FM: 15 ft.x 15 ft.
(15.24 x 15.24 meters). (15.24 x 15.24 meters). (7.62 x 7.62 meters). (4.572 x 4.572 meters).
FM: 30 ft.x 30 ft. FM: 30 ft.x 30 ft. FM: 20 ft.x 20 ft.
(9.144 x 9.144 meters). (9.144 x 9.144 meters). 1(6.096 x 6.096 meters).
"Refer to NFPA for application requirements.
SCREW TERMINALS NOTES
Application: Heat detectors should be used for
Standard Dual-Circuit property protection. Reliance should not be
Single-Circuit Detector placed solely on heat detectors for life safety.
Detector Used to send two When life safety is involved, smoke detectors
MUST also be used. Detectors must NOT be
Wire from independent signals. painted.
alarm panel Batterybackup: Heat detectors should be elec-
or previous Wire connected to tronically supervised with battery backup at the
detector. next detector or panel.
\� end-of-line resistor. Rate-of-rise mechanism: The rate-of-rise
�I mechanism may be subject to reduced sensitiv-
ity over time. Annual testing of the rate-of-rise
• • operation is recommended.
ELECTRICAL RATINGS
Wire from 0 O • 6-125 Volts AC, 3.0 Amp.' alarm panel or previous 6-28 Volts DC, 1.0 Amp.
detector. • 125 Volts DC, 0.3 Amp.
• 250 Volts DC, 0.1 Amp.
Wire connected to Wire connected to
next detector or next detector or
end-of-line resistor. end-of-line resistor.
NOTE: All single-circuit NOTE: All dual-circuit
models come with one (1) models come with two(2)
normally open dry contact. normally open dry contacts.
Page 2 of 2 — DA46530
[i
DA-46778• F-050
i`
ADT-BG-12 Series
Manual Fire Alarm Pull Station
Section: Conventional Initiating Devices July 10,2000
GENERAL U.S. PATENTS PENDING
The ADT•BG-12 Series is a cost-effective,feature-packed,non- PRELIMINARY
coded series of manual fire alarm pull stations. It was designed
to meet multiple applications with the installer and end-user in
t
mind. The ADT-BG-12 Series features two dual-action models.
The ADT-BG-12 Series provides ADT Fire Alarm Control Pan-
els (FACPs), as well as other manufacturers' controls, with a
manual alarm initiating input signal. Its innovative design, du-
rable construction, and multiple mounting options make the
ADT-BG-12 Series simple to install, maintain, and operate.
FEATURES
• Aesthetically pleasing, highly visible design/color.
• Attractive contoured shape with light textured finish.
• Meets ADA 5 lb. maximum pull-force.
• Meets UL 38, Standard for Manually Actuated Signaling
Boxes. I 'z
• Easily operated (dual-action), yet designed to prevent false
alarms when bumped, shaken, or jarred. P�9
I PUSH IN/PULL DOWN handle latches in the down position !
to clearly indicate the station has been operated.
a
• The word "ACTIVATED"appears on the top of the handle in a
i bright yellow, further indicating operation of the station.
• Operation handle features white arrows showing basic op-
eration direction, for non-English-speaking persons.
• Braille text included in finger-hold area of operation handle
and across top of handle.
• Hex- and key-lock models available.
• U.S.patent-pending hex-lock needs only a quarter-turn to lock/ fi
unlock.
• Station can be opened for inspection and maintenance with-
out initiating an alarm.
• Product ID label viewable by simply opening the cover; label
is made of a durable long-life material.
• The words"NORMAL"and"ACTIVATED"are molded into the
• Backplate is large enough to overlap a single-gang backbox
plastic adjacent to the alarm switch (located inside), cutout by up to 1/2" (12.7 mm).
• Four-position terminal strip molded into backplate. Optional trim ring (BG-TR).
• Terminal strip includes Phillips combination-head captive 8/ Designed to replace the popular ADT-BG-10 Series.
32 screws for easy connection to Initiating Device Circuit Models packaged in attractive,clear plastic(PVC),clamshell-
(IDC). style, Point-of-Purchase packages. Packaging includes a cut-
Terminal screws backed-out at factory and shipped ready to away dust/paint cover in shape of pull station.
accept field wiring (up to 12 AWG/3.25 mm2).
• Terminal numbers are molded into the backplate,eliminating CONSTRUCTION
the need for labels. Cover, backplate and operation handle are all molded of du-
- Switch contacts are normally open. rable polycarbonate material.
• Can be surface (with SB-10) or semi-flush mounted. Semi- • Cover features white lettering and trim.
flush mount to a standard single-gang, double-gang, or 4" • Red color matches System Sensor's popular SpectrAlertTM
(10.16 cm) square electrical box. horn/strobe series.
Lrequirements.
ocument is not intended to be used for installation purposes. We try to keep our product
ation up-to-date and accurate. We cannot cover all specific applications or anticipate all
All specifications are subject to change without notice.For more information,contact:
One Town Center Road,Boca Raton,FL 33431
Security Services Inc. Phone: (561)988-3600 FAX: (561)988-3675 Made in the U.S.A.
DA-46778.07/10/00 PRELIMINARY— Page 1 of 2
OPERATION PRODUCT LINE INFORMATION
The ADT-BG-12 manual pull stations provide a textured finger- Model Description
hold area that includes Braille text. In addition to PUSH IN and ADT-BG-12 Dual-action pull station with SPST N/O switch,
PULL DOWN text, there are arrows indicating how to operate screw terminal connections, hex lock.
the station, provided for non-English-speaking persons.
Pushing in and then pulling down on the handle activates the ADT-BG-12L Same as ADT-BG-12 with key lock.
normally-open alarm switch. Once latched in the down posi-
tion,the word"ACTIVATED"appears at the top in bright yellow,
with a portion of the handle protruding at the bottom as a visible
flag. Resetting the station is simple: insert the key or hex(model
dependent),twist one quarter-turn,then open the station's front
cover, causing the spring-loaded operation handle to return to
its original position. The alarm switch can then be reset to its
normal (non-alarm) position manually (by hand) or by closing
the station's front cover, which automatically resets the switch.
SPECIFICATIONS 1.390"
Physical Specifications: (35.306)
52004dim.lbl
BG-12 SB-10
Height: 5.500 inches 5.500 inches
(13.97 cm) (13.97 cm) Wire Length
Width: 4.121 inches 4.125 inches Strip Gauge
(10.4673 cm) (10.4775 cm)
Depth: 1.390 inches 1.375 inches T
(3,5306 cm) (3,4925 cm)
Electrical Specifications: 1.000"
Switch contact ratings: gold-plated; rating 0.25 A @ 30 VAC (25.40)
or VDC.
ENGINEERS' & ARCHITECTS'
SPECIFICATIONS
Manual Fire Alarm Stations shall be non-coded, with a key- or 0.750"
hex-operated reset lock in order that they may be tested, and (19.05)
so designed that after actual Emergency Operation, they can- 5.50011
not be restored to normal except by use of a key or hex. An (139.70)
operated station shall automatically condition itself so as to be
visually detected as activated. Manual stations shall be con-
structed of red colored LEXANO (or polycarbonate equivalent) (MM)
with clearly visible operating instructions provided on the cover. cl
3
The word FIRE shall appear on the front of the stations in white E
letters, 1.00 inches (25.4 mm)or larger. Stations shall be suit-
able for surface mounting on matching backbox SB-10;or semi-
flush mounting on a standard single-gang, double-gang, or 4"
(10.16 cm) square electrical box, and shall be installed within
the limits defined by the Americans with Disabilities Act(ADA)
or per national/local requirements. Manual Stations shall be
Underwriters Laboratories listed.
Page 2 of 2 — DA-46778-07/10/00 PRELIMINARY
I?
i 4y� 'yM AL
Fire Alarm Systems Helping People Take Action TM
F TM SERIES RSS & RSSP SINGLE
SPL (, I FIRE E
& MULTI-CANDELA STROBES
A Family of Multi-Candela Appliances' & STROBE PLATES
I
c @ 3
g DESCRIPTION .'
Wheelock s patented Series RSS Strobe Appliances and
Series RSSP Strobe Plates have lower current draw and
Zero Inrush while maintaining outstanding performance,
reliability and cost effectiveness.These versatile Series RSS Series RSSP
appliances will satisfy virtually all requirements for indoor,
I wall or ceiling mount applications. a -
Strobe options for wall mount models include 15/75cd or �
Wheelock patent pending Multi-Candela strobe with field
selectable candela settings of: 15,30,75 or 110cd. w `
Ceiling mount models are available in 15,30,75 or 100cd -- -
intensities. AMulti-Candela Indicator
(bottom of Strobe Lens)
All models may be synchronized when used in Features
conjunction with the Wheelock SM,DSM Sync Modules Approvals include:UL 1971,New York City(MEA),
or the PS-12/24-8 Power Supply with Wheelock s California State Fire Marshall(CSFM),Pending:
Patented Sync Protocol.Synchronized strobes can Factory Mutual and Chicago(BFP).
eliminate possible restrictions on the number of strobes ADA/NFPA/ANSI compliant.
in the field of view.Wheelock s synchronized strobes Meets OSHA 29 Part 1910.165.
offer an easy way to comply with ADA recommendations Wall mount models are available with Field
concerning photosensitive epilepsy as well as meeting Selectable Candela Settings of 15, 30, 75 or
the requirements of NFPA 72(1999). 110 cd. (Multi-Candela models)or 15/75cd.
• Ceiling mount models are available in 15, 30, 75
Wheelock s Series RSS Strobes employ a Patented or 100cd.
Integral Strobe Mounting Plate that can be mounted to a Low current draw with temperature compensation
single gang,double gang,4"square, 100mm European to reduce power consumption and wiring costs.
backboxes or the SHBB surface backbox. If the flush Strobes produce 1 flash per second over the regulated
backbox has side or top space between it and the voltage range.
finished wall,the NATP(Notification Appliance Trimplate) 12 and 24 VDC models with wide New UL"Regulated
may be used.It provides an additional.65"of trim for the Voltage"using filtered(DC)or unfiltered VRMS input
Appliance.An attractive cover plate is provided for a clean, voltage.
finished appearance on all models. Wall Mount or Ceiling Mount models.
• Synchronize with Wheelock SM,DSM or PS-12/24-8
The Series RSSP Multi-Candela Strobe Plates are a cost Power Supply with Wheelock s built-in sync protocol.
effective way to retrofit required strobe appliances to bells, ZERO Inrush above Peak.
homs,chimes,multitones or speakers and easily mounts Compatible with all Wheelock 2-Wire products.
to standard 4"backboxes or for surface mount use with Fast installation with IN/OUT screw terminals
Wheelock s SBL2 surface backbox. using#12 to#18 AWG wire.
Copyright 2000 Wheelock, Inc. All rights reserved.
NOTE: All CAUTIONS and WARNINGS are identified by the symbol A. All warnings are printed in bold capital letters.
A WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING,
SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS,CAUTIONS OR WARNINGS COULD RESULT IN
IMPROPER APPLICATION,INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION,WHICH COULD RESULT IN
PROPERTY DAMAGE,AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
General Notes
• Strobes are designed to flash at 1 flash per second minimum over the Regulated Voltage Range. Note that NFPA-72(1999)specifies a flash
rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
• All candela ratings represent minimum effective Strobe intensity based on UL 1971.
• Series RSS&RSSP Strobe products are listed under UL 1971 for indoor use with a temperature range of 32'F to 120'F(0*C to 49*C)and
maximum humidity of 85%.
• "Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change, UL used the
terminology "Listed Voltage Range".
Table 1: Specifications&Ordering Information-Multi-Candela Models-WALL MOUNT
Order Input Regulated Strobe Average Current
Model Code Voltage Voltage Range Candela(CD)
VDC VDC/FWR 15cd 30cd 75cd 110cd Mounting Options"
RSS-24MCW-FR 9400 24 16.0-33.0 15/30775/110 .047 .081 .128 .166 B,D,E,F,G,H,J,N,O,R,X
RSS-24MCW-FW 9401 24 16.0-33.0 15/30175/110 .047 .081 .128 .166 B,D,E,F,G,H,J,N,O,R,X
RSSP-24MCW-FR 9402 24 16.0-33.0 15/30/75/110 .047 .081 .128 .166 D,E,Z
Table 2: Specifications&Ordering Information-Single Candela Models
I
rder Input Regulated Strobe Average
Model Voltage Voltage Range Candela Current' Mounting Options"
ode VDC VDCIFWR
SERIES RSS STROBES-WALL MOUNT
RSS-2415W-FR 7470 24 16.0-33.0 15 .051 B,D,E,F,G,H,J,N,O,R,X
RSS-241575W-FR 7471 24 16.0-33.0 15(75 on Axis) .065 B,D,E,F,G,H,J,N,O,R,X
RSS-2430W-FR 7472 24 16.0-33.0 30 .081 B,D,E,F,G,H,J,N,O,R,X
RSS-2475W-FR 7473 24 16.0-33.0 75 .133 B,D,E,F,G,H,J,N,O,R,X
RSS-2411OW-FR 7474 24 16.0-33.0 110 .161 B,D,E,F,G,H,J,N,O,R,X
RSS-1215W-FR 7475 12 8.0-17.5 15 .123 B,D,E,F,G,H,J,N,O,R,X
RSS-121575W-FR 7476 12 8.0-17.5 15(75 on Axis) .170 8,D,E,F,G,H,J,N,O,R,X
SERIES RSS STROBES-CEILING MOUNT
RSS-2415C-FW 7482 24 16.0-33.0 15 .072 B,D,E,F,G,H,J,N,O,R,X
RSS-2430C-FW 7483 24 16.0-33.0 30 .102 B,D,E,F,G,H,J,N,O,R,X Note: Models are available in either
Red or White.
RSS-2475C-FW 7484 24 16.o-33.0 75 .205 B,D,E,F,G,H,J,N,O,R,X Contact Customer Service for
B,D,E,F,G,H,J,N,O,R,X Order Code and Delivery.
RSS-24100C-FW 7485 24 16.0-33.0 100 .238
SERIES RSSP STROBE PLATES-WALL MOUNT
RSSP-2415W-FR 7792 24 16.0-33.0 15 .051 D,E,Z *Average Current per actual
RSSP-241575W-FR 7793 24 16.0-33.0 15(75 on A)ds) .065 D,E,Z Wheelock Production Testing at
RSSP-2430W-FR 7794 24 16.0-33.0 30 .081 D,E,Z Listed VDC.For Rated Average
and Peak current across UL
RSSP-2475W-FR 7795 24 16.0-33.0 75 .133 D,E Z regulated voltage range for both
RSSP-2411OW-FR 7796 24 16.0-33.0 110 .161 D,E,Z Filtered DC and unfiltered VRMS,
RSSP-1215W-FR 7797 12 8.0-17.5 15 .123 D,E,Z see Installation Instructions.
**Refer to Data Sheet S7000 for
RSSP-121575W-FR 7798 12 8.0-17.5 15(75 on Axis) 170 D,E,Z Mounting Options
SYNC MODULES/POWER SUPPLY Table 3: Audibles/Speakers for RSSP Strobe Plate
Average Product Series
Model Number Order Input Voltage Current Mounting
Code (VDC) (AMPS)Q options- Muldtone Appliances AMT,MT
24VDc
SM-12n4-R• 6369 24 .025 W Homs AH,NH
DSM-12/24-R•• 6374 24 .038 W Motor Bells MB-G6/G10
PS-12rz4 a�• 8114 120 VAC Speakers ET-1010/1080,E70,ET70
#SM Sync Module is rated for 3.0 amperes @ 24 VDC, Chimes CH70
##DSM Sync Module is rated for 3.0 amperes per circuit. The
maximum number of interconnected DSM Modules is twenty(20).
Refer to Data Sheet S3000 or Installation Instructions(P83123)
for SM and P83177 for DSM).
###Refer to Data Sheet S9001 or Installation Instructions
P83862 for PS-12/24-8 Power Supply.
SERIES WS/WH/WM/VLP STkOBES
fWheeJock
THE SIGNAL SOURCES"'
Wheelock's strobe signals offer maximum reliability and
efficiency for effective visual signaling in fire and life F
safety applications. A xenon flashtube with solid state
circuitry enclosed in a rugged polycarbonate lens elim-
inates the delicate filaments used in incandescent light
signals and provides significantly greater light intensity R C;� rt}
� 1
with lower current requirements. Models with 1.5, 15.0 fh E
and 117 candela are offered. Flush models mount di-
rectly to standard.single gang or 4"square backboxes
and surface models can be used indoors or outdoors.
i
VLP Models can easily add strobe signaling to existing G SERIES _
audible signaling devices. All models are compatible wH
with DC supervision of alarm lines and satisfy the latest SERIES ^
j code requirements for visible signaling. SERIES W31
Features
WH3 WH1
• Low current draw 117 candela strobe models for
Americans with Disabilities Act (ADA) applications.
• UL Listed for Fire Protective Service.
• High intensity output with minimal power input. 117 CANDELA STROBE MODELS
• Compact solid state design with long operating life.
• Choice of input voltages and light intensities.
• Convenient mounting to standard backboxes.
o Compatible with DC supervision of alarm lines. } s-
• Screw terminals for secure in-out field wiring.
• Attractive red textured finish to enhance appearance wMsr WMT wM1T
and durability.
• VLP Models accept a wide selection of audible sig-
nals and speakers for combination signaling. "
SERIES
VLPS
Specifications VLPH
The visual signals shall be Wheelock Series WS/WH/WM Strobes or approved equal. They shall be UL Listed for
Fire Protective Service and shall produce a minimum of 1.5, 15.0 or 117 candela and shall be designed for one flash
per second with continuously applied nominal voltage. All 24 VDC models shall be UL listed for 18.0 to 31.0 VDC.
All 12 VDC models shall be UL tested for 9.6 to 14.4 VDC. The xenon flashtube and associated circuitry shall be
enclosed in a translucent white polycarbonate lens with the word FIRE inscribed on the lens. WS/WH/WM models
shall mount to recessed 4"square backboxes;WS1/WH1/WM1 models shall mount to recessed single gang backboxes
and WS3/WH3/WM3 models shall surface mount to Wheelock's indoor BB backbox or outdoor WBB backbox. VLP
Models shall accept standard audible signals and shall mount to recessed 4"square backboxes or Wheelock's Model
SB surface box.All DC models shall be polarized and all AC models shall have a blocking capacitor for DC supervision
of alarm lines. Screw terminals shall be provided for in-out field wiring. Product finish shall be textured red enamel.
WHEELOCK, INC. -273 BRANCHPORT AVENUE- LONG BRANCH, N. J. 07740-(908) 222-6880■ FAX:4908) 222-8707
Ordering Information'
1.5 Candela 15.0 Candela 117 Candela
12,000 Candle ower 70,000 Candle ower
Input Model Order Rated Model Order Rated Model Order Rated Mounting
Voltage Number Code Current Number Code Current Number Code Current Wiring Options Approvals*
12 VDC WST-12-FR 3593 0,050 WHT-12-FR 3300 0.150 UL, ULC,
24 VDC WST-24-FR 0602 0.025 WHT-24-FR 2799 0.075 WMT-24-FR 4909 0.088 Fig' 1 C CFM,
115 VAC WST-115-FR 0603 0.018 WHT-115-FR 3721 0.0601 1 Fig. 2 1 NYC, BFP
12 VDC WS1T-12-FR 3491 0.050 WHIT-12-FR 3494 0.150 Fig. 1
24 VDC WS1T-24-FR 3492 0.025 WHIT-24-FR 3495 0.150 WM1T-24-FR 4910 0.088 D
115 VAC WS1T-115-FR 3493 0.018 WHIT-115-FR 3496 0.060 Fi . 2 UL, CFM,
12 VDC WS3T-12-FR 3324 0.050 WH3T-12-FR 3664 0.150 NYC,
24 VDC WS3T-24-FR 3160 0.025 WH3T-24-FR 3394 0.075 WM3T-24-FR 4911 0.088 Fig' 1 A, B BFP
115 VAC WS3T-115-FR 3388 0.018 WH3T-115-FR 1 3396 0.0601 1 1 Fig. 2
24 VDC VLPS-24-W-HF-R 4784 0.025 VLPH-24-W-HF-R 4787 0.075 Fig. 1 E, F
Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock, Inc.standard terms
and conditions.
WARNING:Any material extrapolated from this document or from Wheelock manuals or other documents describing the product for use in promotional or advertising
claims is used at the sole risk of the user and Wheelock will not have any liability for such use.
'See Note 8
NOTES:
1. All models have polycarbonate lenses with FIRE lettering. 2. All mounting plates are finished in textured red enamel. 3. All models have screw terminals
for in-out wiring except VLP Models have double leads. 4. Strobe in-rush current is 3 times rated current for 1 millisecond(2 times rated current for 10 milliseconds).
Circuit fuses must be rated to handle this in-rush. In-rush current limitation (by the power supply) does not affect strobe operation. Power supply and wiring can
be based on rated (steady state) current. 5. All strobes are designed to flash as specified with continuous applied nominal voltage. Strobe flash rate is designed
for 1 flash per second at nominal Input. Strobes are not recommended for use on interrupted or pulsing signaling circuits. 6. Strobe candela ratings are per UL
Standard 1638 measured on axis. Warning:The intensity may not tre adequate to alert or awaken occupants in the protected area. 7. All 24 VDC models are UL
listed for 18.0 to 31.0 VDC. All 12 VDC models are UL tested for 9.6 to 14.4 VDC.All DC models can be used with filtered or unfiltered(full wave rectified)voltage.
8. Approvals: UL = Underwriters Laboratories; ULC = Underwriters Laboratories of Canada (series WS rated 24 VDC at 0.50A); CFM = State of California Fire
Marshal (series WM approval pending); NYC = New York City(series WHNLPH/WM); BFP =City of Chicago(series WM pending).
Mounting Options
(Backboxes ordered separately—specify color)
A SURFACE B OUTDOOR C FLUSH D FLUSH
SERIES
WS
° OHO \ ° �O% WM SERIES O O Standard
SERIES >�� WHII 0 single gang
SERIES ° WS3 Q WMt O backbox
WS3 BB WH3 I° °
WH3 Q WM3 O
WM3 0 ' Standard
' WBB 4"square
o ° WS
Adapter
plate
supplied
E SEMI-FLUSH*
Wiring o
Fig. 1 (DC STROBES) Fig.2 (AC STROBES) U4",!
DC STROBE AC STROBE+ SERIESdard
VLPSgware
VLPHbox
Next Preceding —� Next
Preceding obe Strobe Strobe Strobe *
orrFACP or EOL or FACP >— —� or EOL F SURFACE
0
0
SB
SERIES
VLPS
VLPH
'VLP Plate shown with optional 6"bell.
WHEELOCK, INC. •273 BRANCHPORT AVENUE• LONG BRANCH, N. J. 07740-(908) 222-6880■ FAX: (908) 222-8707
S0800-592
Printed in U.S.A,
3 i J
d �
,tea
Wheelock's Newest Audible Strobe and Audible Appliances
are the Series NS/NS4 Audible Strobe appliances and the
Series NH Audibles. Both the Series NS/NS4 and NH are ,
LOW CURRENT designs with ZERO INRUSH. The audible
I appliance in both series provides a Selectable continuous
horn tone or temporal pattern (Code 3) tone when constant
voltage from a Fire Alarm Control Panel (FACP) is applied.
All models (audible only or audible with strobe) may be
Synchronized when used in conjunction with the SM or
DSM Sync Module(s). Additionally, the audible may be SERIES NS/NS4
silenced while maintaining strobe activation of the Series
NS/NS4 Audible Strobe appliances.All of these features are
E achievable with either Wheelock's Patented 2 Wire Series -
NS or with the 4 wire Series NS4. Each tone has two dBA
settings to choose from. Pending Approvals Include: Underwriters Laboratories
The Series NS/NS4 Audible Strobe appliances and NH (UL 1971 and UL 464) Listings, FCC, Factory Mutual
Audible Horn appliances are designed for maximum (FM), European Community(CE), California State Fire
performance, reliability, and cost-effectiveness while Marshal (CSFM), New York City (MEA) and Chicago
meeting or exceeding the latest requirements of NFPA 72 (BFP) approvals on all models.
(National Fire Alarm Code), ANSI 117.1 (American National ADA165. ANSI compliant. Meets OSHA 29 Part
1910.
Standard for Accessible and Usable Buildings and Facilities)
and UL Standard 1971 (Standard for Signaling Devices for Compliance with RFI Limits in FCC Part 15, Class B for
The Hearing Impaired) and UL 464 (Audible Signal compatibility with sensitive detection and communication
Appliances). NS/NS4 Audible Strobe appliances, when circuits.
properly specified and installed in accordance with Low Current.
Zero Inrush.
NFPA/ANSI standards can provide the Equivalent
Facilitation allowed under ADA Accessibility Guidelines Wall mount only.
2 Selectable tones and dBA levels.
(ADAAG General Section 2.2) by meeting or exceeding the
illumination which results from the ADA specified strobe Continuous tone: 92 or 97 dBA anechoic; 82 or 88 dBA
intensity of 75 candela at 50 feet. This is an illumination of reverberant.
.030 lumens per square foot. Temporal Code 3 tone: 92 or 97 dBA anechoic; 76 or 82
dBA reverberant.
When used with the Wheelock Series SM or DSM Sync Universal Mounting Plate (patent pending) for single
Modules, the continuous horn tone produces a gang, double gang, 4" square, 100 mm European
synchronized temporal (Code 3) tone (mandated by Backboxes or Wheelock's SHBB shallow surface
NFPA-72 (1993) with an effective date of July '96). This backboxes.
ensures a distinct temporal (Code 3) pattern when 2 or more No additional trim plates required.
audibles are within hearing distance. If not synchronized, Available with 15, 15/75, 30, 75 and 110 cd strobe
the temporal sound could overlap and not be distinctive. At intensities.
the same time the strobes on the circuit may also be 2 versions available.
synchronized. This provides the ability to comply with ADA 2-wire for both audible and strobe.
recommendations concerning photosensitive epilepsy and 4-wire model.
meet NFPA requirements when installing 2 or more visual Non-Sync and Sync in one (synchronization requires the
appliances within the field of view. All of this plus the ability SM or DSM Sync Module).
to silence the audible is Achieved by using only 2 WIRES. Matching horn in 12/24V (Selectable).
Copyright 1997 Wheelock, Inc. All rights reserved.
A WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING,SPECIFYING OR APPLYING
THIS PRODUCT.FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS,CAUTIONS AND WARNINGS COULD RESULT IN IMPROPER APPLICATION,INSTALLATION
AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION,WHICH COULD RESULT IN PROPERTY DAMAGE,AND SERIOUS INJURY OR DEATF?TO
YOU AND/OR OTHERS.
General Notes: r;
• Strobes are designed to flash at 1 flash per second minimum from 20-31 VDC (for 24 VDC models) or 10.5-15.6 VDC (for 12 VDC
models). Note that NFPA-72 (1996) specifies a flash rate of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to
3 flashes per second.
• All candela ratings represent minimum effective Strobe intensity based on UL 1971.
• Series NS/NS4 Strobe products are Listed under UL 1971 for indoor use with a temperature range of 32' F to 120' F (0' C to 49' C)
and maximum humidity of 85%.
• Series NH horns are Listed under UL 464 for audible signal appliances.
Q'Pecifications and Ordering lnforana fio : PRELIMINARY
WALL MOUNT ONLY*** WHEELOCK AVERAGE CURRENT
Order Input Strobe Mounting Average Current#(Amperes) @ 24 or 12 VDC Anechoic/
Model Number* Code Voltage Candela Options** Reverberant dBA levels for Continuous&Temporal (Code 3)Tones
NS-2415W-FR 7805 24 15 B,D,FG,J,N,X Chart Key.,Settings Low& High with A=Anechoic dBA/
NS-241575W-FR 7806 24 15/75 B,D,FG,J,N,X R=Reverberant dBA ratings
NS-2430W-FR 7807 24 30 B,D,FG,J,N,X Model Number Low A=92/R=82 High A=97/R=88
NS-2475W-FR 7808 24 75 B,D,FG,J,N,X NS-2415W-FR .069 .073
NS-2411OW-FR 7809 24 110 B,D,FG,J,N,X NS-241575W-FR .079 .087
NS-1215W-FR 7815 12 15 B,D,FG,J,N,X NS-2430W-FR .101 .106
NS-121575W-FR 7816 12 15/75 B,D,FG,J,N,X NS-2475W-FR .153 .162
NS4-2415W-FR 7900 24 15 B,D,FG,J,N,X NS-2411OW-FR .180 .188
NS4-241575W-FR 7901 24 15/75 B,D,FG,J,N,X NS-1215W-FR .153 .138
NS4-243OW-FR 7902 24 30 B,D,FG,J,N,X NS-121575W-FR .193 .186
NS4-2475W-FR 7903 24 75 B,D,FG,J,N,X NS4-2415W-FR .069 .073
NS4-241 1 OW-FR 7904 24 110 B,D,FG,J,N,X NS4-241575W-FR .079 .087
NS4-1215W-FR 7910 12 15 B,D,FG,J,N,X NS4-243OW-FR .101 .106
NS4-121575W-FR 7911 12 15/75 B,D,FG,J,N,X NS4-2475W-FR .153 .162
NH-12/24-R 7449 12/24 - B,D,FG,J,N,X NS4-241 1 OW-FR .180 .188
Average NS4-1215W-FR .153 .138
SYNC MODULE*** Current NS4-121575W-FR .193 .186
SM-12/24-R 6369 12 .014 E,N NH-12/24-R .010/.020 .013/.027
24 .025 E,N Average current per actual Wheelock Production Testing at 10.5,12,15.6,20,24&31 VDC.
DSM-12/24-R 6374 12 .020 w For rated average and peak current across the UL listed voltage range for both filtered DC and
24 .038 W unfiltered VRMS,see installation instructions(P83518).
NOTES:
Model#Color is Red,can be ordered in White,Call Customer Service for order code&
delivery.
Model Code Suffix:W=wall,F=fire lettering or call Customer Service if other lettering is
required(Ex.Feugo),R=red,W at end=white,4=4 wire
Example:NS-24411155W-FR --Red NS4-2415W-FR--O-Red NS-24475W-FW--*-White
WaII R # ire Walt'75 ire
Fire Wall
4- ire
" Refer to Data sheet S7000 for mounting options.
SM Sync Modules are rated for 3.0 amperes at 12 or 24 VDC;DSM Dual Sync Modules
are rated for 3.0 amperes per circuit.The maximum number of interconnected DSM
modules is twenty(20).Refer to Data Sheet S3000 or installation instruction(P83123 for
SM or P83177 for DSM).
Note: Synchronized Temporal (Code 3) Tone is achieved when the "continuous horn tone" is selected and connected to the Series SM
or DSM Sync Modules. Refer to NS, NS4, NH installation instructions (P83518).
SERIES NS/NH QUICK REFERENCE GUIDE
j' Wall Non- Sync's w/ Strobe
Model Number* Mount Sync SM or DSM Candela 24 VDC 12 VDC 2 Terminal 4 Terminal
NS-2415W-FR X X X 15 X X
NS-241575W-FR X X X 15/75 X X
NS-2430W-FR X X X 30 X X
NS-2475W-FR X X X 75 X X
NS-24110W-FR X X X 110 X X
E' N8-1215W-FR X X X 15 1 X X
NS-121575W-FR X X X 15/75 X X
I N54-2415W-FR X X X 15 X X
NS4-241575W-FR X X X 15/75 X X
NS4-2430W-FR X X X 30 X X
NS4-2475W-FR X X X 75 X X
NS4-2411GW-FR X X X 110 X X
NS4-1215W-FR X X X 15 X X
NS4-121575W-FR X X X 15/75 X X
i
NH-12/24-H" X X X X X X
+ Model#Color is Red,can be ordered in White,Call Customer Service for order code&delivery
" NH-12/24 can also be ceiling mounted.
A WARNING:CONTACT WHEELOCK FOR THE CURRENT"INSTALLATION INSTRUCTIONS"(P83518)AND"GENERAL INFORMATION"SHEET(P82380)ON THESE
PRODUCTS.THESE DOCUMENTATIONS DO UNDERGO PERIODIC CHANGES.IT IS IMPORTANT THAT YOU HAVE CURRENT INFORMATION ON THESE PRODUCTS.
THESE MATERIALS CONTAIN IMPORTANT INFORMATION THAT SHOULD BE READ PRIOR TO SPECIFYING OR INSTALLING THESE PRODUCTS, INCLUDING:
• TOTAL CURRENT REQUIRED BY ALL DEVICES CONNECTED TO SYSTEM PRIMARY AND SECONDARY POWER SOURCES.
• FUSE RATINGS ON SIGNALING CIRCUITS TO HANDLE PEAK CURRENTS FROM ALL DEVICES ON THOSE CIRCUITS.
• COMPOSITE FLASH RATE FROM MULTIPLE STROBES WITHIN A PERSON'S FIELD OF VIEW.
• THE VOLTAGE APPLIED TO THESE PRODUCTS MUST BE WITHIN THEIR RATED INPUT VOLTAGE RANGE.
• INSTALLATION OF 110 CANDELA STROBE PRODUCTS IN SLEEPING AREAS.
• INSTALLATION IN OFFICE AREAS AND OTHER SPECIFICATION AND INSTALLATION ISSUES.
• USE SERIES NS/NS4/NH ONLY ON CIRCUITS WITH CONTINUOUSLY APPLIED OPERATING VOLTAGE. DO NOT USE SERIES NS/NS4/NH ON CODED OR INTERRUPTED
CIRCUITS IN WHICH THE APPLIED VOLTAGE IS CYCLED ON AND OFF AS THE STROBE MAY NOT FLASH.
• FAILURE TO COMPLY WITH THE INSTALLATION INSTRUCTIONS OR GENERAL INFORMATION SHEETS COULD RESULT IN IMPROPER INSTALLATION,APPLICATION,
AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION,WHICH COULD RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR DEATH TO
YOU AND/OR OTHERS.
• CONDUCTOR SIZE(AWG),LENGTH AND AMPACITY SHOULD BE TAKEN INTO CONSIDERATION PRIOR TO DESIGN AND INSTALLATION OF THESE PRODUCTS,
PARTICULARLY IN RETROFIT INSTALLATIONS.
Wiring Diagrams (for :all models)
NS APPLIANCE NON-SYNCHRONIZED TO NS APPLIANCE sM
FROM + } NEXTSIGNAL SYNCHRONIZED WITH ACE aTfloaE
PRECEDING _ OR END OF LINE SM MODULE SINGLE evu uacu'r sleoaE
SIGNAL OR _ RESISTOR CLASS"B"CIRCUIT F
F.A.C.P. IE.O.L.R.) our
WITH AUDIBLE A Na hs a OLP•
SILENCE FEATURE P W`
.AU0BLE
AUBBLESIGMI. EOtfl'
+ — clAwIT
SIGNAL j I -auo:etE
NS AND NH APPLIANCES SYNCHRONIZED WITH DSM MODULE NS AND NH �aLEscon _
DUAL CLASS"A"CIRCUIT WITH NO AUDIBLE SILENCE FEATURE APPLIANCES ,a
DSM SYNCHRONIZED e+ „
e SYNC+ WITH MULTIPLE
i Fe-
0 sY"`- DSM MODULES
� +OUT/ 3 Ea'j fiq
` +IN 1 NS NS INN
S PC:ES:�Ga I
f h11NUS i I,
I
) E AUDIBLE6Eo—
A SIGNAL
C CIflCUIT
I c OUT
4
B 6atE x�Ua
— �
axEsdc�.x N" s''.
AUDIM SIGNAL �-
CIRCUIT RETURN
U5I.91lREflCONNECTittG 4YIPING SHOWN.IAA%IIAUh10F T1VENtt(20)
Note: NS/NS4/NH must be set on continuous horn tone to achieve synchronized temporal (code 3)tone. Refer to Installation Instruction
(P83518).
Value determined by FACP NAC Circuit(s).
Refer to SM/DSM data sheet S3000 or installation instructions (P83123 for SM or P83177 for DSM).
Wheelock products must be used within their published specifications and must be PROPERLY specified, applied, installed, operated, maintained and
operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance
with local, state and federal codes, regulations and laws. Specification, application, installation, operation, maintenance and testing must be performed
i by qualified personnel for proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters' Laboratories
s (UL), National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other
applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all appendices and amendments and the
requirements of the local authority having jurisdiction(AHJ).
E �
i
I
E
Architects and ' .nqh-i-.erS pccif' l_�ior.is RE_?4'MINe�iPf<°�
The notification appliances shall be Wheelock Series NS/NS4 Audible Strobe and Series NH Audible Horn appliances;and companion
SM and DSM Sync Modules, or approved equals. Series NS/NS4 appliances and SM and DSM Sync Modules shall be listed under
UL Standard 1971 (Emergency Devices for the Hearing Impaired for Indoor Fire Protection Service). Series NH Audible Horn shall be ir
UL listed under Standard 464(Fire Protective Signaling). Series NS/NS4/NH and Series SM/DSM shall be certified to meet FCC Part �.
15, Class B.
The appliances shall be designed for 2 or 4-wire operation and shall provide either a continuous horn/strobe signal or temporal
(Code 3) tone when constantly applied voltage from a Notification Appliance Circuit (NAC) of the Fire Alarm Control Panel (F.A.C.P.)
or synchronized temporal (Code 3) horn and synchronized strobe when used in conjunction with the SM or DSM Sync Modules.
Series NS shall be designed so that the audible signal may be silenced while maintaining strobe activation (when used with the SM
or DSM Sync Modules). The SM and DSM Sync Modules shall incorporate two inputs from Notification Appliance Circuits (NAC) for
power connection from the Fire Alarm Control Panel; one for the strobe (NAC) circuit and one for the audible (NAC) circuit. A single
2-or 4-wire output shall control both the audible and visual appliances. Upon activation of the audible silence function of the Fire Alarm
Control Panel, the audible signal shall be silenced while maintaining strobe activation.
Sound output at 10 feet shall be field selectable for 92 or 97 dBA anechoic for both continuous or temporal (Code 3) tone. Series
NS/NS4 shall provide listed strobe intensities of 15, 15/75,30, 75,and 110 candela,with a flash rate of one flash per second minimum
across the Listed voltage range.The strobe shall incorporate a Xenon flashtube enclosed in a rugged Lexan lens.
The Sync Module shall be designed and available in two versions; the SM 12/24 for control of a single Class B circuit; and a dual
output version, the DSM-12/24 for control of either a single Class A or two Class B circuits.The DSM dual circuit version shall provide
the additional capability of "daisy-chaining", that is, the ability to interconnect multiple DSM's for synchronous horn and strobe
operation on multiple circuits. DSM-12/24 Interconnection capability shall be for a maximum of 20 modules (40 Class "B" circuits or
20 Class "A"circuits). Rated average current requirement for the SM 12/24 shall be .014 amperes @ 12 VDC and .025 amperes @
24 VDC; the DSM 12/24 shall be .020 amperes @ 12 VDC and .038 amperes @ 24 VDC. The SM Sync Module shall be capable of
handling a 3 ampere load at 12 or 24 VDC. The DSM Sync Modules shall be capable of handling a load of 3 amperes per circuit in
the Class"B"mode and 3 amperes per module in the Class"A"mode at 12 or 24 VDC.
SM or DSM Sync Modules and NS/NS4 Audible Strobes shall be designed as a system for continuous activation of the strobes should
the Sync Module contacts fail in the passive state(i.e.,contacts remain closed). In this default mode,the strobes shall revert to a non-
synchronized default flash rate.
Series NS/NS4/NH appliances shall be designed for operation at 12 or 24 VDC, over their respective listed voltage ranges of 10.5 to
15.6 VDC;and 20.0 to 31.0 VDC.The units shall be designed for operation on filtered DC,or FWR(full-wave rectified). Rated average
current for Series NS/NS4 shall depend upon voltage and strobe intensity; the Series NS current shall be as low as .069 amperes for .;
24 VDC versions and .146 amperes for 12 VDC versions and the Series NS4 current shall be as low as .053 amperes for 24 VDC
versions and .133 amperes for 12 VDC versions (both with volume set at high dB output). Rated average current for Series NH
(volume set at high dB output) shall be .020 amperes for 24 VDC versions and .010 amperes for 12 VDC versions.
All versions shall be polarized for DC supervision and shall incorporate screw terminals for in/out field wiring of#18 to#12 AWG wire
size.
Series NS/NS4/NH shall incorporate a unique Universal Mounting Plate which shall allow mounting to single-gang, double-gang, 4"
square, 100 mm European backboxes or Wheelock's SHBB shallow surface backbox. No additional trim plate shall be required for
flush mounting.
Dimensions for the Series NS/NS4/NH shall be 4.75 inches square by 1.22 inches deep.
Due to continuous development of our product,specifications and offerings are subject to change without notice in accordance with Wheelock, Inc.standard terms and
conditions.
3 YEAR WARRANTY
Distributed By:
,Ii8Tl
Canada 800.397.5777 NMA
E-mail: Info@wheelockinc.com
http://www.wheelockinc.com MEMBER
WHEELOCK, INC. ■ 273 BRANCHPORT AVENUE ■ LONG BRANCH, N.J. 07740■(732) 222-6880■ FAX: (732) 222-8707
S2000P 4/97
Serles MB Motor Bells
Wheelock's Series MB motor bells provide a better engineered motor bell for fire and life safety alarm systems. A number
of improvements have been built into the Wheelock Series MB bells line, including higher dBA, low current draw, built-in
trimplate for semi-flush mounting, low frequency aluminum shells, and low RFI noise. The motor for Series MB bells is a
durable, high torque, permanent magnet motor selected for its high performance and long life.
4-inch 10-inch
Features Bell Bell
• LIL Listed for Fire Protective Service. g"
• High sound output with low current draw. lit
• Low frequency aluminum shells for better audibility through
walls,doors,and other structures.
• Both 6"and 10"shell sizes in 12 or 24 VDC models.
• Integral RFI suppression to minimize induced noise on the
alarm lines.
• Mounting options for surface, semi-flush, outdoor, and con-
cealed conduit installation.
• Built-in trimplate makes semi-flush mounting simpler and
I less expensive. For combined audible (bell) and visual signaling convenient
• Screw terminals permit fast in-out field wiring of #12 to #18 retrofit plate assemblies are available with 15, 15/75, 30, 75
AWG wire. and 110 candela strobes (Refer to Series LS/LSM/
• Polarized for DC supervision of alarm lines. MS/IS/HSW Strobes for strobe specifications and technical
• Operate on filtered or unfiltered DC. information).
Specifications and Ordering Information (DC vibrating Motor Bells)
Model Order Shell Input Input dBA @ Mounting
Number Code Size Voltage Current 10 Ft. Wiring Options Approvals
MB-136-12-13 3942 6' 12" :A. 0.060
MB-G6-24-R 3941 6" 24 0.030 92 Fig ME
1 A(Note 1) CFM,
MB-t10-12-R 3944 10" 12 0.060 B,C,D A,FM
MB-G10-24-R 3943 10" 24 0.030
NOTES
1. Built-in trim plate eliminates need for SFP plate.
= 2. Typical dBA at 10 ft.is measured in an anechoic chamber.
3. All 12 VDC models are UL rated for 9.0 to 15.6 VDC and all 24 VDC models for 18.0 to 31.0 VDC. All DC models can be used with filtered and unfiltered(full wave rectified)voltage.
4. Approvals:UL=Underwriters Laboratories;CFM=California Fire Marshal;MEA=Materials and Equipment Acceptance;NYC=New York City;FM=Factory Mutual.
Mounting Options
A SEMI FLUSH B. SURFACE C.CONCEALED CONDUIT D. OUTDOOR
ON
SERIES Standard SERIES AP SERIES WBB
MB 4°square SERIES BB MB MB
backbox MB
E. FLUSH F. SURFACE SBLI BACKBOX G. SURFACE SBL BACKBOX
STANDARD 4'SQUARE X 2-1/8" BACKBOX(SBL-1)
DEEP BACKBOX LSPM
SIGNAL C LSP/MSP/ISP/HSPW �' „44°°
Mounting Plates
SIGNAL-- ngrr <o 11 and backboxes
ordered separately.
Specify color.
E E
SEE PAGE 4 FOR GENERAL AND TECHNICAL NOTES.
uu
heelo* 17
D-500
o PS Series
v;c Power-Sonic Batteries
E Section: Power Supplies/Accessories May 14, 1998
GENERAL
Power-Sonic PS Series Batteries provide secondary power for the whole
series of ADT fire alarm control panels. U�
I FEATURES MH14328 (S)
• Provide secondary power for control panels.
• Gelled electrolyte.
• Sealed and maintenance-free.
• Overcharge protected.
• Extended shelf life.
• Easy handling with leakproof construction.
• Ruggedly constructed, high-impact ABS plastic case.
• Long service.life. SEALED RECHARGEABLE
• Compact design. BATTERY
CAPACITYPOI.!/E/P �° NN,N,,�N„N,/,,,,,
///Y/KVNNN6.Y/'AYN AxvMwO/SOA01
Battery capacity,expressed in ampere-hours(AH), is the product of a dis- Model PS-695 6 Vail 9.5 AH
charge current and the length of time that the current is discharged. Bat- Power-sonic Corporation
teries are rated according to their performance during 20 hours of dis-
charge at a constant current.
The rated capacity of a battery is determined by subjecting it to a constant
discharge current for 20 hours at 68'F(20°C).After 20 hours the voltage
1 across the terminals is measured. The discharge current which causes a
reading of 1.72 volts per cell(5.16 V on a 6 V battery and 10.32 V on a 12
V battery)is called the rated current. This current multiplied by 20 is the
rated capacity of the battery.
APPLICATIONS The PS-695 Battery
Use the PS Series batteries to provide backup power for control panels.
Select batteries based on current requirements for your system and the
capacity of its charger. These batteries can be used over a temperature
range of-76°F to+140°F (-60°C to +60°C).
CONSTRUCTION
The sealed construction of the Power-Sonic battery allows trouble-free,
safe operation in any position. There is no need to add electrolyte, as
gases generated during overcharge are recombined in a unique"Oxygen
Cycle." The battery is sealed,leakproof,and maintenance-free. The case
is made of ABS, a high-impact plastic resin (acrylonitrile butadiene sty-
rene copolymer)with high resistance to chemicals and flammability.
1 NSTALLATI O N
All panels have space reserved for batteries. See the appropriate panel ;;
installation manual for battery size restrictions. Typical interconnection
diagrams are shown in the literature accompanying each control panel.
The PS-1242 Battery'
This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice.
For more information,contact:
1750 Clint Moore Road,Boca Raton,FL 33431
EM
Security Services, Inc. Phone: (561)988-3600 FAX: (561)241-1923
�� DA43990 — Page 1 of 3
286 4th Street , Bremeiton . WA 98337'
rlmnev ( 360 ) 47e-5275 FAM ( 300 ) 47a-5203
BUILDING PERMIT
Joh (`ph,fi "410 N Perm! I W OA 00h',
I h)w WOW ! I Win "I
I tjr AM WT 02111nov
on. I W/pow
I ic,i ifi I, !,,I l I l k' 460, 61 1, 5 86e 1 Xp 1 1 ps
trlVt
I RNINWIA QNK AM< '60 61JA86HP 0: PEN10504W Fxp: 04/08000v
P"0 WN( �,)Y)r,, 51LVFNHAI I WA 9830"
id:P! W W PJPJNW W FARRION Hkhli T',
Permit 1ppw 66. 0 Wal calruLated fw 46 , P,
TO WH POO I row:, C�0 irdditional Fvpn � 00
OHWI WO: 00 101al p d mirC lee : 06 , 0
ii
ikI
VY
m,�I I or 1, of w, "I I ul i,-,i -o i,),o k a"I horbud ly, f kiln porml I I Ywd Go amprond w i kh i H
lr'),O d o, I fH t1o:l ,kokc wr -1p h iormi f oi if EW W Idinq or wuyk awl RqUed Q� YvI pcndi i" sw+Ndvol
scum 4 4ON 1 A "vv K Wu a i In r I to wni k j o i[�ii i or i r r,
II< ir ol ;0h i i f Y Q IN pooprif holds , r"? Lim, Q!kv of isvemov-04o or suddhrn oil A iul to avo
I'o it L&K nr"I"10 hr4"l I Ann ao MMO. Hw pormA houbr HuU roll[y Qie Hulldiyo Official Neu War k 10,6
Wap"Abon, I W a WM fro A Hn jywA I ontity Up Buibby" MAIN Ov yovioirod inspontio", may rVOM
in w M fly ;wO Wil vKh Wr OW ON porma NOW tAn nWonhato W Us WWW" A I ji-W
w,o �, )�, r,x, 14"0% i',viy MoMink lenhy", ov Wancial Wden A&I
¢,e dirontiv Q W povot VOW , PaWye in %ATYAmmWe n"Ie requirequyao A I I hovivnily Us
arr6 j11 uv Iambi I toy nownwOM Wh 61v
I Wel-q r oil Hy fhaf I MY' A101 WKI COWAnUd Nib jvnMi mvi Wu AN �ssnr to W Lrtw nd 6orve; W , All Iq
1;wk", VI ,cv"'H r 011 '-` � i W —1/pe A work wri I I I r. ccwpl A A A t h AM% spcG 11 iod herei
A ) w ;MQ 'KIM at pvv:;�rvw, 10 5AVV stuht"Hiv to AM& iw nsiM IN provioirco of
"Yov 1,0 hei�� id 01)1 rawdaH"q VIOUIV t icy or I Q tw(AaKurrr Of r OnY=k!"n-
"den'd
WoNjIv Not I am 'Xvwpf h(Ol W ivrOOVOMOYAM 01 [to YWO UOYOXWOWO YOW01vapion low, undar
fJr'.I T*I T I d t I MY*A A I
PHI FT IS hi Ei FR r Q W�W V�� 1 111111111 1 T Q Q AS T W R1,1
286 4th Street , Bremerton , MA 98 3 3
360) 47S-S275 FAX: ( 360) 478-5278
HH H9 P 1d is ")C]
� ow
I K 4 0 11 1 j M L I f[I C
6 i"F Dk:� Dept : BLDG D 1 v j a i n
I I NW "Mar hum f vv>P1H 1 20d"j UP Washinnhon Anqo0alion ul bujidinq WkinK
WEC F415P4 M u W s v A s t P i, a(i nj i i h Lhvn 'NoW of I
�' ('J� F I) Aaky 01 Owl DN[sk . (01 1 u[Mv alld j AUsh US
1K (d Aw it, (Knvi KUM knop Hemli h Di n f r 1 GL B -52 Ki
i 1 1 f DNK PHAMATT W AT K O Y 14 URMHAWN mor Bk. WITMED I Mid GA I I PC
PHOU I U N I VN , WO ) d /8 > ?/n
1, Ina, a "k W*Ij
" 'r " t� 1 ,f'01'
Y 1� I
*1 it& h of*&I I I *o=T P 11*14 tyx t uIr A
f j SON
55
0.7
I a"
I i
k
an
4 l 64i. `; iE.hKIH. A f`GI`+IV (rw";.:G
k WWI i'1'(.e(A S MJN
k ���.a;� w � l i,t, ail •
IqPf14(A "Y" TlyI M1W I IF A"MR,
H 1 Y M u;7 of 1446 MY H L jA u V r fj d M I W D F PI 0 1 f V 10 N W 0 l..�
()tIEl(? +'.8.�9 .Ahi AI Ix WA I KY ( C.:6,. (.F``01 PoTII A CA_l'=xCY 1 AM) �
m WA`.r41Hdo, 1011 DWAR 6V°'l9"M W I MIR a19gH) �d9�Kk&r"1:."( 6�I . I &I )
bA f6_F`6 11 " I'{ ;� l.d:Go N P�',l. nN � a fr.`1,' � r i'°`� ° ���lY�;�sl `t' (+E l G� F'T (,:0 C'€:T"
l' 11, k P,I,j l Pl G4 1A F i N AJ' F V RA A W: AWK51`09, Wh P l E ITN 1 N N"
kf l li Nk d 11 r WCV @ (,d'1 t ( ( I"S� i�h N (1�l Y 6 H (v`
i
( V (ti r d C�"�H1G 66`" " r>fi�Cf G�r,�) l?�1 t, ,1"0"
k LrA, I I �,d,4( 1: . ,d �,n f ( P„y, d !" � l� a �F�
i:Vp ". WHO; A NIF MMA I k V a 1 n C'('tM (,t:MI (Tr CN.!'. N A 11 ° AGV MY �
k 11 kHL"Ik i,II d� ')J "i I� Ifs1 yj , 1),. c I cl a na it or g OR BY [A ME AN
'�.` ',� r, .t. � k H, H HF,
:"?;�y(�� e'�,a � � , t jp� '(7 " ��', "`1 A�r,¢,'� ���3 11 eWa 1. ,",� L P�d� �F b V 6 �;:a f I'"`{f",8 c r. i
J w r M ! ,I,,,,lo :1�.i'', wf v NY a b a n u sj oa a ,C os hi'm
k f',
r i
k �.� ° ,. v( . }
� k
k j
I
k
{
}
f
k
i
9
a
1
1
f
1
9
Y
P
1
k
p are, t TV I T I Ish I I t g I Gtwo*% a I To*1 h 4 WT T F.A*I to 4 7W 1 v
WD L I P
h'jcj, C1,H I K %q f"m: pl-NNIAM n 'AN j H P K
w i 0 00 A We; M/P MHONG PERM
N t,"'I'H I��'�t f:""r� � I"1 d I I p p n � 6 0 J
v; jnl� OMM I Of
IIn ( . 1 K HANIM WH I CLO
......../-,
/ --
p�l�/'�l�/4ij 0I//✓lsr%7�''�I jlt � f
I r//
r r tH 9f� ,..,.
<r � ��U�i��fa IT CENTER
Department of Community Development 286 4th Street Bremerton WA'' 98337
I (360) 478-5275 Fax(360) 478-5278
i
Building Permit Application
APPLICANT: ❑ OWNER ® CONTRACTOR ❑ AUTHORIZED AGENT
Site Address - 7� � [Tax Account Number:
CONTRACTOR: OWNER Name: `^ �,
Address: (V dz S Address:
City, State, Zip,V�iw,I. dl City, State, Zip
Phone #: Phone #:
License Ex itr./. Date::/ Authorized Agent Address:
Contact Name: ti� (Cvt + ' City, State, Zip
Contact Phone#: 04 <) /,.3 .. W' 6 I Phone #: )
Check the type of application for below:
NEW SINGLE-FAMILY RESIDENCE NEW COMMERCIAL ❑ NEW GARAGE/CAR PORT
❑ NEW DUPLEX ❑ COMMERCIAL REMODEL NEW ACCESSORY BLDG
NEW MANUFACTURED HOME COMMERCIAL ADDITION ❑ NEW SIGN
❑ RESIDENTIAL REMODEL COMMERCIAL REPAIR STRUCTURE DEMOLITION
RESIDENTIAL ADDITION NEW MULTI-FAMILY ❑ GRADING(Cubic yards: )
RESIDENTIAL REPAIR FjTENANT IMPROVEMENT OTHER
IS THIS PROPERTY WITHIN 200 FEET OF A SHORELINE? YES ❑ NO .0
Scope of ork Proposed:
Square Footage: Dwelling: Garage: Decks:
Valuation Plan Review Fee Permit Fee Surchar a Total Fees
� .4
Application for which no permit is issued within 180 days following the date of applRcation shall expire by limitation, and
plans and other data submitted for review may thereafter be returned to the applicant or destroyed by the building official.
The building official may extend the time for action by the applicant for a period not exceeding 180 days on request by
the applicant showing the circumstances beyond the control of the applicant have prevented action from being taken. No
applicant shall be extended more than once. In order to renew action on an application after expiration, the applicant
shall resubmit plans and pay a new plan review e.
c.
APPLICANT'S SIGNATURE: !' - -r -- DATE: _.,���:� _._ Cx 2—
`y B,I
l �: r 4,!r ,p 1T CENTER
Y'',
_ Mo
t�
��»1�3:v7 rad�"`trava�,'� Wfu1„tix�1,1t6 tsb�� r',�hui.,l���tarr`.�ISu' � i
Department of ComznuriiV Development 286 4dt Street Bremerton WA 98337
(360) 478-5275 Fax(360) 478-5278
❑ MECHANICAL ❑ PLUMBING
Type of Fuel: ❑ Electric Gas ❑ Oil ❑ Propane
Occupancy: ❑ Residential ❑ Commercial
Site Address: Ile)
CONTRACTOR: OWNER:
Address: .X Address: '❑� �, ,
City, State, Zip: �"' �� G„ City, State, Zip:
License#& Exp. Date: . . j Phone#: ( ) 7
Contact Phone #: ( () � ✓c :
NO. TYPE OF EQUIPMENT NO, TYPE OF FIXTURE
RANGE WATER CLOSET - �' ��` '``�� ,
WOOD/PELLET STOVE/GAS FIREPLACE BATHTUB
GAS FURNACE btu LAVATORY (BATHE`8fNK) �w
CONVERSION BURNER: btu SHOWER
UNIT HEATER btu KITCHEN SIN
BOILER btu DISHWASHER
I LAUNDRY TRA
Y,
GAS PIPING _W.::m:,:m:n..:.n ❑
EVAPORATION COOLERS btu CLOTHES WASH
AC UNIT btu WATER HEATER
HEAT PUMP btu URINAL
REHEAT BOX btu: DRINKING FOUNTAIN
EXHAUST FANS FLOOR SINK OR DRAIN
RANGE HOOD (RESIDENTIAL) WATER PIPING &ALTERATION
RANGE HOOD (COMMERCIAL) GREASE TRAP/INTERCEPTOR
CLOTHES DRYER HOSE BIBBS
INCINERATOR LAWN SPRINKLER SYSTEM
DUCT ALTERATION SWIMMING POOL
TANK TYPE: BLDG. SEWER: (MOBIL/MOVED HOME)
REFRIGERATION UNIT ROOF DRAINS
OTHER: OTHER:
MECHANICAL FEES:
PLUMBING FEES: —
TOTAL ES:
/ 3 r
Applicant's Signature Date
VICINI Y MAP
Inspection Report
Scope of work: RC- A&45 Z tjTCvfIWL fJ'
P _ _ ermit tuber:
Address: —. � dt�g " �.f/ u^ f 't21" V —
Owner= /` Phone: —
Contractor: - 2
FOUNDATION
Inspection card/approved plans on site _ Setbacks --
Footings:required stoat placement _ Walls:required steal placement
Footings:required width&depth _ wails: d size
gearing soil(soils analysis if applicable) Special inspector(when applicable)
COMMENTS:
FOOTINGS APPROVED: WALLS APPROVED:
FRAMING _
Electrical approved Plumbing&mechanical approved
Crawl space access(min.18 x 24) Floorjoists and beams/proper clearance to eailh
Positive connections.posts&beams Foundation vents
Posts properly supported _ Anchor bolts: nuts&washers in place
Mudsill:treated material Floorjoists:size&span
Beams/girders:size&span Notching&drilling:joists&beams,studs
Smoke detectors:all required locations _
Exhaust fans:where required
Exhaust fans insulated:once nditianad space Wholo house fan,outside air intakos oath bedroom
Fans terminating directly outside Range hood
Dryer exhaust vent All vent terminations:windows&property line
Fireplace cnmbustion air Windows:meets egress requirements
Windows:prop er Uvalve —
_Ceiling heights _ Windows:safety glazed where required
Stairs;ris e&run;proper width — Stairs:headroom clearance
_ _ Fire blocking wall to ceiling,furred walls every 10'
Fire blocking:stairs,soffits,lowered ceilings Fire blocking:tubsishowers
Fire blocking:lids in void spaces,shafts Fire blocking:stuff h_ole_s top&Wfim plates
— Sheet rock backing Wall bracing_
Ratters size/notching Trusses:specs,bracing
Attic access Attic ventilation —
Wall&roof sheathing _ Shear nailing -
Building dried in --
COMMENTS:
APPROVED:
_ ENERGY CODE COMPLIANCE
Insulation:proper R valve Insulation:proper fastening
Insulation:vapor barrier _ Bottom plates caulked to floors
Penetrations caulked as required Electrical boxes gasketed or caulked
_6 mil black poly in crawl space — --- -- — —
COMMENTS:
UNDER FLOOR/FOUNDATION INSULATION APPROVED:
WALL INSULATION APPROVED: _ CEILING INSULATION APPROVED:
Appflance location and access,proper suppoll Appliance clearance to combustibles
Venting:clearance to combustibles Venting:size&support
Vent tprm�intiori--
-60mbusi�louaj—r
----------------�—size&support Gas pipe under testt Ducts:
I Gas pipe size&Support Gas pipe:underground min.12"below grade
Gas pipe:within 6"or underground-coated Gas shutoff within Within T of appliance
j Gas logs:safety shut-off.--.----, Gas logs:damper permanently open
I Wood stoves EPA certified
Wood stoves&fireplaces:Tight-fitting doors
Woad stoves&flreplaces: per health Manufactmes-�f—)ncson sit-e-----
ufa re
im
1 Chimney liner:when required �Chn,�y.t E4 Chimney:separate flues when required
COMMENTS:
GAS PIPING APPROVED: FURNACE APPROVED:
OTHER APPLIANCES APPROVED-.
PLUMBING
DVVV&water piping under test DVVV:piopergrade
DVVV.-proper sizing
DVVV:proper drainage fittings where required
DVVV&water piping proper support
DWV:required clearrouts
Vent termination All Mutes vented properly
Water supply:proper sizing Shutoff valves on all factures
Water heater.gate valve on cold water—supply
VVater----------_ Vacuum breakers:where required
—heater relief valve drain to outside Water heater. m711--strap
pad Tunder water heater when requiredWater-piping insulated as required
--
Grease Fs/iutW—ceft.rs W here required
Proper indirect wastes:where required
COMMENTS:
PLUMBING GROUNDWORK APPROVED: PLUMBING ROUGH-IN APPROVED:
SHEETROCK
it Proper fastening nails-7"o.c.horiz.Plane Nails 8"o.c,vertical plane
Proper fastening screws 12"o.c. hertz.Plane(112") Screws-12"o.c.horiz.plane(1/2')24"o.c.framing
Proper fastening: screws-16"o.c.vent.Plane(1/2"F
screws 12"o.c.vent.plane(1/2")24"o.c.framing
Proper fasten
ing
ning screws-IT o.c,froriz.plan (5/8") o.c,horiz.plane 24"o.c.training
--
Pro—p-e—rfastening scre--ws---1Toe,vent.--Plane--(-5J8") Screws-12"o.c.vent.Plane(518")24"—.c framing
Area&occupancy separation walls Draftstops where required
=:TU=sab:1:e�space under stairs(5/8"required) �aeZ..qZh-e—rere`quired(not onceitin'g)
--
Purr
-Corridors
COMMENTS:
SHEETROCK APPROVED:
----------r FINAL
1 Energy code requirements met, exhaust fans Plumbing&mechanical
� Garage/dwelling door self closing solidcore Smoke-detectors where required
Han
drails&guardrails,as required_ Fire ratings maintained
Exit signs when required Emergency lighting when required
Occupant load posted when applicable Building weatherlight
Wood--siding—t-.—earth separation (6") ---Building address posted
Randon nionitorwhen required
COMMENTS: A 7
IkM!iA•I•i�i�.d% a—�.,a � :,�i'tainyi%'/ .,�� ,,~ ,0.\aea\!'t•I�yi�".-��; `t'�,�a�e'+?RO�:.jI00:�+—�W�.f'��i�'f�5`a--';f 'a0i,�R/j'l :*�0�.�a�ati•A'!•�yi�'/, �.
•, ,Y %'d, J�%• '° '\�1 0' %%,+�I \�1�i/► j/ ,'max'®ZT1. R'/, �yi Dr. / e�// 1 .►C. %%' ' \3lv►�:. %/6/r •J/
' ,F 4 �,t' rr11 .I� ♦. O 4 rr•, .I % I l"At rr1, 'l,% �f tZ rr• �t-%%' . t r• I t ►. r• .l
I ;.v:•'�• /rNltPl''t/ '�^' ,r)•!1,+ :�/S •��,. a+lrr•1�,a./ t•�;• r l/.1,• 0 � � r!Il+1 �./ � y%tt rrlll+r �%�•� •`1�Z,t r+a•r -�,:
.vs�� hiR^tYfro .•Q�e�•,RRy. 4+tr iril ,.���,•.tay., xi+�;';!•t„ .age,•.!.♦;,., x��l'%y.+il /',.�a.•.•.ray.,_ '!t,%' rn ..•Cit•.!ayx.' i�!"'}.rp �',.�.e,•.r;:•. xQ+i�',ylir�l ,y
q rrh1 x w; R r,l H5 1
1 a`•� yr�rl r .!xa',1'!•"r'.;{!!'• 'il,SSrr r' .!• i!n.'alr r5 '!n.al..s. r.•.,,!i 'S:•$,�h,rrf'.,�,.'.Jt.'.:r'!!•.'4!h �,u •• �r•%�!i•'i:'•ly'1r1 t.px,�/1;• •r,/.'�.'Il1rr i!,rl ,
.••,•::d$r• .!. ./. :!/. .r�i,r �,.a/a: ..!,. ,;,�Si�.a. ./. r,•11'r�;• ',L'1, :!s.'a�;,y•.L$'✓.a!p'ili.•''f'rt!...n .,'�;15;3 .u. ..r.:itl,.rr,'rl,.•r., i.
a..Ri• :;.1.;..' \,•!1 ...�;rr r:R$•:l! .r:Y, .:4 •!ji!.:. .•.�✓:J.•, ..1,.... `L
at
O
I> -
I - -
rl.. r1-
A•
, t
•1.
> r
f tip •„bVU�ttrt,?,Ud!dU�U;t�?-xR',U.UrflrUtUr :UU�1r';Ur1}itli xt.U,.Ar},i},'UrU,tlit.6.JrVrH.V. xtl.tj!t"51rIIM.U, . ,V;UtU.Ur �t.MU,U•UrhUrU,U.U,UrU.Udt.U; r rUx x xUar3rv. ,1+, ,U .e���.'
• / •�`•
OF Rk ,.
•n Imo'
a i,l ■���� !i.�w�+
• ice•
■rrr
�'.a/tea , ' d•�ai�
MtPartmeut of drommuuitp �ebftopmrnt R
':e __ •.icy;,. 5 �j:��.•
ry- '�7lcid ee�cte/.+cteate iQQued�lirawua�rt to rice /!� o� 'S•/elet�a�s 109 A0� tl:e _ •?
6 VILKf.�IYN'ry 66 �e, aj K� 4 f1w V•LCA�/erem I/(�f'T.V o eode, eeze0a ^z { (• ' i
tica�at eke force w&zww, fffa ortwNu a," uc mo iPiawe wed
.��i. �' •./,,♦•. ACE<f�e't � Cd�u�� {i'[• ltde. � ♦1�•' = id
ISSUED TO: •• , �'
i:��• a•�R'.�' PRONET INC - • •,
SITE ADDRESS: 910 N C"BRIAN AVE
9✓' '.i Type of Occupancy Occupant j1
/ -
;'' Construction Classification Load Common Use -
Wv
49 service ;• t
��-- Permit Number: BL01-0159 Date: 11/27/2 ���,•`" `=
•... ..:
ME
Christophe Hugo, Director
Special Conditions:
THIS CERTIFICATE
IFICATE MUST BE POSTED AND PERMANENTLY MAINTAINED IN A CONSPICUOUS PLACE `� •♦ ''••�?'�v
3 �� t}.A' •p.r a;'.f Il'it Il)Ri.{31)1.Ut 1�r .Il'A'! Afl A�(.f�x&. t •YI.�. .�r •A. .11 .t'u. .1 lA e r la 7'A IDp 1. ~.:•L/��
.o ..:_ } 5 r tt. ! t � U -13 0 • ! �, 4 • -S c.4 IH•' - 1
F
f •}• i 7
Ir�y i M, I,t
r r.. II�� d '$f' nt.•..,... rr. "�{" rrr ..;.•t::n•ra r$1�r 11 ./•a.•,%r'%� .v, rtr 5.$•.� .ma
�i!tj
•xn"1 .!!,1•1\r ./•'.,.Yrlr,•, }••r 111.l t"1•'Rfr •i•:}•t•,•,!L'1�!••• t%%1$.rI 1'!1. •/•.• r er 11/1+1'1'fIr•./•'.•r•4•••4A�.•:"•e• UI.1{ I1N ./•.•r.. 41..t•r til jt�, •/•..• ,A!.,• II,.I .I It /�i'��
'- ailph •!.,y' •:�:•/. uh•�4ty111 •!.r.•.::�... ,,,,Yi'}lont •!.yyi ..p .ric{t,'t.o .!.,y..:�.'`• ,r'i•.Y,1}yll, •ef,; ,.•• /, '�ritffl)o, ..,y.,v,•:• 11.;tti7�x o •..fa.
ur•., ' � Irr !!r �; � .I, ur !b �� t Jr !r+ �; t• r+r !b P !r •; � / Irr !!, �_.•
1+1i!!!++ rt 4;r}1�++ \'Yr` M .,+y %`•t.r+lilrli+ t �v ! R►•t r.;,l+b+ �� Q t r.�,l+�++ !• •eQ!!++ \rR t r,lll+. 't .'
9 t ��• t •/, a Ri 'a��. 3• fi, is Ril '3�'Zi, i,"R�. `ti�� it 9' �ii, '\ �,
_ �$I!'k�4,..►!�'!� -L�.., ��'"e/: •�►n,►:►'•►� � :+!'4/♦a.• ►�� ., k/6yFJO. 4►\ e ��•. L{��4�r,tSt+�J _ � �. 4V•
I I
it r
i
I,
l
1
f , i
H
I
(1
I
f(I
j'
r
I
� I
1
I �
if
14
xp n , � r 1 1
I
L
f
FILE COMMENTS
SITE ADDRESS: � o ., a,,,�r , APP. NO. (�
OWNER: , , PERMIT NO.
NUMBER OF PLAN SETS
VALUATION:
FEES PAID: PLAN CK. BLDG. SRCHG.
PLBG. MECH. OTHER
DATE DATE APP. W/ NOT
ROUTING: SET# SENT RETURNED APP. COMMENTS APP REVIEWER
f> . . ...
BUILDING
PLANNING
ENGINEERING
WATER I ��
FIRE
TRAFFIC
HEALTH DEPT.
DATE COM M ENTS
j B R E M E R T O N B U I L D I N G D E P A R T M E N T
P E R M I T A P P L I C A T I O N
" Application Date 02/28/1991 Application Number 91AP03039
Issue Date Permit Number
Assessor Acct # Project Group
Site Location 910 N. CAMBRIAN
Owner - Last Name HORNING First SPENCER MI
- Street 2425 MARINE DRIVE
-. City BREMERTON State WA Zip 98312
- Phone (206) 479-3119
Tenant 's Name Phone(206) -
Agent 's Name Phone(206) -
Architect 's Name
[X] Building [; ] Grading [ ] Sign [ ] Paving
[ ] Mechanical [ ] ,Move Building [ ] Burning [ ] Underground
[ ] Plumbing [ ] Mobile Home [ ] Land Clear [ ] Demolition
---------------------------------------------------------------------
Building Contractors
Work will be completed by owner.
Nature of Work:
Replace retaining wall .
Building Valuation , $900 .00
---------------------------------------------------------------------
Council District Census Tract
Construction Sq Feet Inspections
Type Required
Residence . [ ] Zoning Foundation [X]
Business [X] Type Framing [ ]
other [ ] Insulation [ ]
New [ ] Plumbing [ ]
Repair [X] Status Mechanical [ ]
Remodel [ ] Code Wallboard [ ]
Addition [ 32 Final [X]
M E R T 0 N A U T) A, f,,� a,C,,,TJY OF BREMERTON
P F R M 1 T A T 1 0 N 4 1991
MUNICIPALVTILITIES
Appl7catica Daoe foil ' 28/ 194k, Application Number 91AP03039
Qone DUO", Permit Numbei:
hsveosor ACCL q Project
SM Location 00 N . CAMBRIA�,,f
Owner Lust Name A!OC"N Nix Filst SPHNCER Mr
sLrEnv 2425 MARINE DRIVE
Uty SHEMERT014 State WA Z i P 9 8 3 1
Phone ( 206) 479- 310,7
1:� Phone( 206 )
venant a
Agent " S wamf,a
Arcnitect ' s Namu
[X] W " ding Grading Sign
Mechanlral mnve BUININg Buining Underground'
Plumbing Mobile Home hand Clear Demolition
Controctor :
Ko; L will he complettd by nwner ,
Natute of Work .,.,.
Replace retaining waK ,
B& j d! nq va I Uati
cowni:�il Distria, CenEus Tract
CC=t t L&i 00, sq Feet Inspect i
T I Requiced
ReAdunce Zoning Foundation
Busluess Typr, Framing
Other insulation
New Plumbing 'J,
Repaig Ex '', stat='' mechanical
Remodel WOO'',, Wallboard
32 Final x
See attached for comments
Inter-Office Communication -s'
City of Bremerton '
Date 3-8-91
s.
To Janet Lunceford, Building
From �V/
Terrie Kirchner, UtilitiesA
Subject REQUEST FOR REVIEW
Site Address: 910 N. Cambrian Building Appl. # 91AP03039
Owner: Spencer Horning Contractor: Owner
No identifiable problems noted.
Developer shall contact the Utility for Application for Water Service and pay all assessed
fees prior to construction.
Developer shall contact the Utility for Application for Sewer Connection and Sewer
Inspection Permit and pay all assessed fees prior to construction.
ElDeveloper shall contact the Utility for Application for Storm Sewer Inspection and pay
all assessed fees prior to construction.
Atmospheric vacuum breakers to be installed on all faucets, hose bibs, and flushometers.
All plumbing, inside and out, shall conform to City of Bremerton and Washington State
Cross Connection control Standards.
Owner shall contact the Utility Billing Office (478-5316) prior to demolition for payment
of fees for water meter removal for existing service. If service is to remain, contact
must be made for possible recoding of billing account type.
Prior to demolition of existing structures, sewer laterals shall be capped. Appropriate
sewer cap permits and inspections shall be obtained by the Contractor.
Development is subject to AWWA Regulations, APWA Specifications, DOE Regulations,
DOH Regulations,. Bremerton Municipal Code, and Utility Standards.
Contractor to verify location and depth of existing utilities. Contact Underground
F1
Utility Locates (1-800-424-5555) forty-eight (48) hours prior to start of construction.
Other:
APPRO DATE:
-X
B R E M E R T 0 N B U I L D I N G D E P A R T M E N T
P E R M I T A P P L I C A T I O N
Application Date 02/28/1991 Application Number 91AP03039
Issue Date Permit Number
Assessor Acct # Project Group
� Site Location 910 N. CAMBRIAN
owner - Last Name HORNING First SPENCER MI
- Street 2425 MARINE DRIVE
f` -. City BREMERTON State WA Zip 98312
Phone (206) ` 479-3119
Tenant 's Name Phone(206) -
Agent 's Name Phone(206) -
Architect 's Name;
[X] Building [ ] Grading [ ] Sign [ ] Paving
[ ] Mechanical [ , Move: Building [ ] Burning [ ] Underground
Plumbing [ ] Mobile Home [ ] Land Clear [ ] Demolition
I
-------------- ----- -------------- --------------------------------
t
Building Contractors
Work will be completed by owner.
Nature of Work:;
(' Replace retaining wall .
r
i
Building Valuation $900 .00
----- ------------t---- --------------- ----------------. -------------
Council District Census Tract
Construction Sq Feet Inspections
Type Required
Residence . [ ] Zoning Foundation [X]
Business [X] Type Framing [ ]
other [ ] Insulation [ ]
New [ ] Plumbing [ ]
Repair [X] Status Mechanical [ ]
Remodel [ ] Code Wallboard [ ]
Addition [ ] 32 Final [X]
o
I ; B R E M E R T 0 N B U I L D I N G D E P A R T M E N T
V P E R M I T A P P L I C A T I O N
Application Date 02/28/1991 Application Number 91AP03039
Issue Date Permit Number
Assessor Acct # Project Group
Site Location 910 N. CAMBRIAN
Owner - Last Name HORNING First SPENCER MI
- Street 2425 MARINE DRIVE
-. City BREMERTON State WA Zip 98312
- Phone ( 206) '479-3119
Tenant 's Name Phone(206) -
Agent 's Name Phone(206) -
Architect 's Name '
[X] Building [ ] Grading [ ] Sign [ ] Paving
[ ] Mechanical [ ] ,,Move Building [ ] Burning [ ] Underground
[ ] Plumbing [ } Mobile Home [ ] Land Clear [ ] Demolition
----------------------------------------------------------------------
Building Contractor:
Work will be completed by owner.
Nature of Work:
Replace retaining wall .
Building Valuation $900 .00
---------------------------------------------------------------------
Council District Census Tract
Construction Sq Feet Inspections
i Type Required
Residence . [ ] Zoning Foundation [X]
Business [X] Type Framing [ ]
Other [ ] Insulation [ ]
New [ ] Plumbing [ ]
Repair [X] Status Mechanical [ ]
Remodel [ ] Code Wallboard [ ]
Addition [ ] 32 Final [X]
i
CITY OF BREMERTON BUILDING DEPARTMENT
PERMIT APPLICATION
DATE: 3-1- 199 1 TO BE COMPLETED BY 3-5- 199 1
i
I
s
Spencer Horning owner
OWNER CONTRACTOR
910 North Cambrian
LOCATION OF JOB
FOR
replace retaining wall
ENGINEERING COMMENTS/REVIEWED Bx ..J�
i
B R E M E R T O N B U L D I N G D E P N R T M E N, T
P E R M I T A P P L I C A T I O N
i
Application Date 02/28/1991 Application Number 91AP03039
Issue Date Permit Number
Assessor Acct # Project Group
Site Location 910 N. CAMBRIAN
Owner - Last Name HORNING First SPENCER MI
€ - Street 2425 MARINE DRIVE
! - City BREMERTON State WA Zip 98312
I - Phone (206) 479-3119
Tenant 's Name Phone(206) -
Agent 's Name Phone(206) -
Architect ' s Name
[X] Building [ ] Grading [ ] Sign [ ] Paving
[ ] Mechanical [ ] Move Building [ ] Burning [ ] Underground
[ ] Plumbing [ ] Mobile Home [ ] Land Clear [ ] Demolition
---------------------------------------------------------------------
Building Contractor:
Work will be completed by owner.
Nature of Work:
Replace retaining wall .
Building Valuation $900 .00
---------------------------------------------------------------------
Council District Census Tract
Construction Sq Feet Inspections
Type Required
Residence [ ] Zoning Foundation [X]
Business [X] Type Framing [ ]
other [ ] Insulation [ ]
New [ ] Plumbing [ ]
Repair [X] Status Mechanical [ ]
Remodel [ ] Code Wallboard [ ]
Addition [ ] 32 Final [X]
BF& EMERTON BUILDING DEPARTMENl'
P E R M I T A P P L I C A T 1 0 N
Application Date 02/28/1991, Awplication, Number 91AP03039
I a a U e Da t petmit Numbex'',
hsoessor Acct # Project
Site Location 910 & CAMBRIAN
Ownei Last Name HORNING First SPENCER K,11[
Street 2425 MARINE DRIVE
city BREMERTON State WA Zip 98312
Phone (206) 479- 3119
Tenant 's Name Ph4'Irne(206)
Agent ' s Name Phone(206)
Architect ' s Name
EX3 Building E 3 Gradino E J Paving
Mechanical1 k Move Building Burning
Plumbing Mobile Home Land Clear D e m o I i t i ot").,
- - -- ------ ------------------ -------------- -
-- -
Building Cantractori
Wcrk will be completed by owner ,,
pult t!�urawv
Nature of DING
Replace retaininy wall .
Building Val uatiort $900 . 00
----- - ------- ------------------------------ -- - ------------------ ----
Council District Census Tract
I
Construct i ur�, Sq Feet Inspections
T y pc,, Required
Residence zoniug Foundation [X]
Business Nj Type Framing
other I I insulation
New E I Plumbing E I
Repair Ex''I Btatuern Mechanical
Remodel Code Wallboard
Addition 32 Final
Rep ace,
r� ornfirvc� �Yl Wat� d' amart
910 CGM 6r-I IV A vel.
erJ �
1411
� cs
m
ti
o �
b e— SSvee
INSPECTION RECORD CARD
CI I BREMERTON BUILDING DEPARTMENT
TY Or
PERMIT NUMBER
ADDRESS 910 N. CAMRIAN
OWNER SPENCER HORNING PHONE
CONTRACTOR SELF PHONE
FOUNDATION
1. PERMIT ON SITE 7. CHECK FOR FILL
2. CHECK PLANS TO PERMIT B, REQUIRED STEEL IN PLACE
3. CHECK SETBACKS 9. CHECK FIREPLACE FOOTING
4. PROPERTY STAKES 10.ANCOR DOLTS
5. FOOTING WIDTH&DEPTH 11. FOUNDATION VENTS
6. SOIL BEARING O.K. 12. CRAWL ACCESS
COMMENTS:
FOUNDATION INSPECTION '19
APPROVED BY:
2A FRAMING 20. FIREBLOCKING
STAIRS
1.WIRING APPROVED DROP CEILINGS
2.FOUNDATION VENTS TUBS OR SHOWERS
3. SHIELD UNDER POSTS ROOF&CEILING LINES
4. POSITIVE CONNECTIONS FURRED OUT AREAS
5. SOIL TO WOOD CLEARANCE FIREPLACE AT CEILINGS
6.BEAM SUPPORT HOLES PLUGGED TOP&BOTTOM
7.TR. MAT. NEXT TO CONC. LID IN VOIDS
8.WASHERS ON ANCHOR BOLTS 21.WINDOWS
9. BEAMS PROPER SIZE MEETS ENERGY CODE CLASS
10. FLOOR JOIST SPAN SAFETY GLAZING
11. NOTCHING&DRILLING REQUIRED FIRE EXITS
12. STAIRS WINDOW BILL HEIGHT
WIDTH 22. CEILING HEIGHTS
RISE&RUN 23. SWAY BRACING
WINDERS 24.TRUSSES
LANDINGS PROPERLY INSTALLED
HEADROOM STAMPED
13.ATTIC VENTILATION(upper&lower) PROPERLY BRACED
14. CHIMNEY STRAPS SECURED 25.ATTIC ACCESS
15.FIREPLACE COMBUSTION AIR 26. RAFTER&JOIST SPAN
16, FANS VENTED TO OUTSIDE 27. ROOFING, FLASHING, SHEATHING
17.WATER CLOSET CLEARANCE 2B. SIDING
18. SMOKE DETECTOR
19. SHEETROCK BACKING COMMENTS:
UNDER STAIRS
ABOVE GARAGE DOOR HANGERS
FRAMING INSPECTION
APPROVED BY:
2TIJ INSULATION COMMENTS:
1. PROPER n-VALUE
2.VAPOR BARRIER
3. PROPER FASTENING
INSULATION INSPECTION
APPROVED BY:
MECHANICAL HVAC APPROVED BY:
1. PERMIT ISSUED
2. FURNACE LOCATION GAS PIPING APPROVED BY:
3. FURNACE CLEARANCE
4. 'B'VENT SIZING WDST
5, '0'VENT CLEARANCE 1.WOOD STOVE CLEARANCE
6.'B'VENT SUPPORT 2. CHIMNEY CLEARANCE
7. COMBUSTION AIR 3. HEARTH EXTENSION
8, DUCT SIZING 4. CHIMNEY HEIGHT
9. DUCT SUPPORT&JOINTS
I O.GAS PIPING TEST WDST APPROVED BY:
11, GAS PIPE SIZING
12. GAS PIPE SUPPORT
COMMENTS:
------------------
p PLUMBING
1. PERMIT ISSUED 6. PROPER FITTINGS
2. UNDER TEST 7. REQUIRED CLEANOUTS
3.WATER PIPE SIZING 8. PROPER GRADE
4. DWV SIZING 9. HWT PRES. RELIEF VALVE&LINE
5. PROPER SUPPORT 10. SEISMIC STRAP
COMMENTS:
UNDERGROUND APPROVED ROUGH-IN APPROVED
BY: BY:
3 WALLBOARD 6. FIRE SEPARATION IN GARAGE
1. LID OVER SIDES 7.ATTIC ACCESS
2. NAILING 8, DRAFT STOP IN ATTIC
3.W/R AT TUB OR SHOWER 9. PROPER CONST. OF FIRE WALLS
4.518 UNDER STAIRS 10. DROP CEILING&LIGHTING
5. FURNACE ENCLOSURE
COMMENTS:
WALLBOARD APPROVED BY:
4 FINAL,
1. HANDRAILS 9. HOT WATER TANK PRL
2. GUARDRAILS 10.OUTSIDE GRADE
HEIGHT 11. SOIL TO SIDING CLEARANCE
INTERMEDIATE 12.SMOKE DETECTORS
3, EXHAUST FANS 13, FIREPLACE HEARTH
4,WATERPROOFING IN SHOWERS 14. SAFETY GLAZING
5. DISHWASHER AIRGAP 15. INSULATION
6. FIRE DOORS WINDOWS MEET ENERGY CODE
LABLED AS REQUIRED UNDERFLOOR&ATTICE INSUL.
SELF CLOSING WATER PIPE&HEAT DUCTS
7. FIRE DAMPERS INSTALLED 16.WOODSTOVE APPROVED
8. PENETRATIONS IN FIRE WALLS 17.WINDOWS&DOORS CAULKED
FINAL PLMB. APPR® (comm.) COMMENTS:
FINAL MECH. APPR. (comm.)
FINAL BUILDING APPR.
E
�'
R A R M R A w<101 w C,��R Q w 'w 0,'R Q
CERTIFICATE OF OCCUPANCY
CITY OF BREMERTON BUILDING DEPARTMENT
f
STATE OF WASHINGTON/OLYMPIC COLLEGE
910 N. Cambrian �2ey� �'uuti�t�rrra
r &we o/Me wwy V/ w4e"w4&" wt Aetein� Sl
TYPE TYPE OCCUPANCY
CONSTRUCTION OCCUPANCY LOAD COMMON USE
VN B2 49 Vocational Sho '
,-?
October 1, 1989 L_LZy ,
Richard R. Mumma
This certificate must be posted and permanently maintained in a conspicuous place.
Permit No. 10366
0 �
C�
70
3506
la b /
fib a V ( v p.. Z- ".
i
i
f
� 4
__
��
��
���
�,
� r
.� ._ r`!
�� �
..
�,
�� {
I � d
�. � � �
,�
� ,
q� a � � �,
I
i�1
�� 1,' � ,
i
_ � .
,. , p�
V
t
i
fM, p l f,
/'.- �'
�'�
s
,e
M�r�p
F,
_ _
�,
�'
�'''
�� t
�,
��
INSPECTION RECORD CARD
CITY OF BREMERTON BUILDING DEPARTMENT 10366
PERMIT NUMBER
ADDRESS 910 N. Cambrian
OWNER Snencpr Rnrnina PHONE
CONTRACTOR NW Building_Services_ PHONE 373-4442
FOUNDATION
1. PERMIT ON SITE 7. CHECK FOR FILL
2. CHECK PLANS TO PERMIT 8. REQUIRED STEEL IN PLACE
3. CHECK SETBACKS 9. CHECK FIREPLACE FOOTING
4. PROPERTY STAKES 10.ANCOR BOLTS
5. FOOTING WIDTH&DEPTH 11. FOUNDATION VENTS
6. SOIL BEARING O.K. 12. CRAWL ACCESS
COMMENTS:
FOUNDATION INSPECTION
APPROVED BY:
2 FRAMING A 20. FIREBLOCKING STAIRS
1.WIRING APPROVED DROP CEILINGS
2.FOUNDATION VENTS TUBS OR SHOWERS
3. SHIELD UNDER POSTS ROOF&CEILING LINES
4. POSITIVE CONNECTIONS FURRED OUT AREAS
5. SOIL TO WOOD CLEARANCE FIREPLACE AT CEILINGS
6. BEAM SUPPORT HOLES PLUGGED TOP&BOTTOM
7.TR. MAT. NEXT TO CONC. LID IN VOIDS
B.WASHERS ON ANCHOR BOLTS 21.WINDOWS
9. BEAMS PROPER SIZE MEETS ENERGY CODE CLASS
10. FLOOR JOIST SPAN SAFETY GLAZING
11. NOTCHING &DRILLING REQUIRED FIRE EXITS
12. STAIRS WINDOW SILL HEIGHT
WIDTH 22. CEILING HEIGHTS
RISE&RUN 23. SWAY BRACING
WINDERS 24. TRUSSES
LANDINGS PROPERLY INSTALLED
HEADROOM STAMPED
13.ATTIC VENTILATION(upper&lower) PROPERLY BRACED
14. CHIMNEY STRAPS SECURED 25.ATTIC ACCESS
15. FIREPLACE COMBUSTION AIR 26. RAFTER&JOIST SPAN
16, FANS VENTED TO.OUTSIDE 27, ROOFING, FLASHING, SHEATHING
17. WATER CLOSET CLEARANCE 28. SIDING
18. SMOKE DETECTOR
19. SHEETROCK BACKING COMMENTS:
UNDER STAIRS
ABOVE GARAGE DOOR HANGERS
FRAMING INSPECTION
APPROVED BY:
2B INSULATION COMMENTS:
1. PROPER R-VALUE
2. VAPOR BARRIER
3. PROPER FASTENING
INSULATION INSPECTION
APPROVED BY:
MECHANICAL HVAC APPROVED BY:
1. PERMIT ISSUED
2. FURNACE LOCATION GAS PIPING APPROVED BY:
3, FURNACE CLEARANCE
4. 'S'VENT SIZING WDST
5. 'B'VENT CLEARANCE 1.WOOD STOVE CLEARANCE
6. 'B'VENT SUPPORT 2. CHIMNEY CLEARANCE
7. COMBUSTION AIR 3. HEARTH EXTENSION
B. DUCT SIZING 4. CHIMNEY HEIGHT
9. DUCT SUPPORT&JOINTS
10.GAS PIPING TEST WDST APPROVED BY:
11. GAS PIPE SIZING
12. GAS PIPE SUPPORT
COMMENTS:
p PLUMBING
1. PERMIT ISSUED 6. PROPER FITTINGS
2. UNDER TEST 7. REQUIRED CLEANOUTS
3.WATER PIPE SIZING B. PROPER GRADE
4. DW SIZING 9. HWT PRIES. RELIEF VALVE &LINE
5. PROPER SUPPORT 10, SEISMIC STRAP
COMMENTS:
UNDERGROUND APPROVED ROUGH-IN APPROVED
BY: BY:
3 WALLBOARD 63. FIRE SEPARATION IN GARAGE
1. LID OVER SIDES 7.ATTIC ACCESS
2. NAILING B. DRAFT STOP IN ATTIC
1, WIR AT TUB OR SHOWER 9. PROPER CONST. OF FIRE WALLS
4.5/8 UNDER STAIRS 10. DROP CEILING&LIGHTING
5. FURNACE ENCLOSURE
COMMENTS:
WALLBOARD APPROVED BY:
4 FINAL
1. HANDRAILS 9. HOT WATER TANK PRL
2. GUARDRAILS 10, OUTSIDE GRADE
HEIGHT 11, SOIL TO SIDING CLEARANCE
INTERMEDIATE 12. SMOKE DETECTORS
3, EXHAUST FANS 13. FIREPLACE HEARTH
4.WATERPROOFING IN SHOWERS 14, SAFETY GLAZING
5. DISHWASHER AIRGAP 15. INSULATION
6. FIRE DOORS WINDOWS MEET ENERGY CODE
LABLED AS REQUIRED UNDERFLOOR&ATTICE INSUL.
SELF CLOSING WATER PIPE&HEAT DUCTS
7. FIRE DAMPERS INSTALLED 16.WOODSTOVE APPROVED
B. PENETRATIONS IN FIRE WALLS 17,WINDOWS&DOORS CAULKED
FINAL PLMB, APPR,-(comm.) COMMENTS:
FINAL MEH, APPR, (com m FINAL BUILDING APPR.
� 41
0
4 44
° N
Q, >I KK
-H 0 >14-4 4H "
w r 0
(0
W 0 W 4J
HI
U) o
a
0
4J 0
En 4J 0 M r
�ppp I
Y '"*�"R Y
4-4 Cj
rn IN
" "
" 0 to map
Wes M
�+ , 4w
�?. 4J X
U 0 W `
0
4J
a)l 0
v `
m� w
F� �I ��'�,.,,_. Ili��� ,�� �,. ..��, .n�✓�a/, +r�o � a�, +l�v,�a`. „r.���> �'q �,+'+M1�,�� '�GN�".m�,.�,rr+�i'�i
2"t
�'
r
e
3 Spencer H. Horning
2425 Marine Drive
Bremerton, WA 98312
479-2981
4
City of Bremerton Planning Dept.
817 Pacific Avenue
Bremerton, Washington 98310
Attn: Don Pratt, Planning Director
RE: 910 Cambrian Building Space
Dear Mr. Pratt,
Please consider this letter our official response to your question as to
the occupancy and use of our building at the formentioned address.
For the past eleven years Bern's Custom Cabintry has occupied a space within
our 910 Cambrian Building. To be specific the Bern's shop conducted wood
working at 907 Mead, which is part of the same building, up until about
August 1989.
I hope this answers your question. If I may be of any further assistance,
please not hesitate to contact me at your convenience.
Sincer ,
pe er H. H
981 2. TELEPHONE NUMBER .3. ANNUAL TAXABLE 4. FEDERAL ID NO. oFFIXCE cEinss 8.CALENDAR QUARTER 6.anre 7. ES REFERENCE NO.
_btS;268 RE`.' 1' � wnGEBASE
EACH EMPLOYEE ...-. MO. DAY YR.
( 20b) 3.77-29�4-_15_, �00.00 91139�t1h5 500 . 115. 03, 31 .89 5.1t2 4�
8. EMPLOYEE'S 9 EMPLOYEE'S NAME 10 HOURS it TOTAL WASHI! 'I
LINE WORKED
SOCIAL SECURITY NUMBER LAST FIRST INITIAL THIS OTR WAGES PAIO TN -T;n
53 `V - `� � .g ER.�%j �a�k-n-y lO/ /093� o::
Q�
zw
5EV ell 50�✓ TOM
�F I
i
a I
Q�
I
EMPLOYER'S QUARTERLY REPORT S
OF EMPLOYEE'S WAGES
I
S
> IF ANY BUSINESS CHANGES HAVE
OCCURRED, COMPLETE PAGE 3. S
1. EMPLOYER'S NAME AND ADDRESS
?L-mNS CUSTOM CABINETRY . ---- S
907 MEAD S
3REMERTON WA
93312-3833 -_ S
TOTALS FOR NO OF PAGES 12 NO OF EMPLOYEES 11 WAGES I
THIS PAGE 5 a_ _ $ F6 7
- -- I,
GRAND TOTALS
ALL PAGES $
COMPUTATION OF-PAYMENT
17. TOTAL WAGES FOR DEPARTMENT USE / C
(SAME AS ITEM 16)
18. EXCESS WAGES
MAKE CHECKS PAYABLE TO: $
EMPLOYMENT SECURITY DEPARTMENT t9' TAXABLE WAGES
ITEM 17 LESS ITEM 18 $ �7 L�
EMPLOYER'S QUARTERLY TAX REPORT 20. TAX DUE C'
T i�'I t� YOUR TAX RATE ,��`)(}2 TIMES ITEM 19 $ / (�
-- t 13 `> +9 C 21. INTEREST FUND TAX(IFT)
YOUR IFT TAX RATE TIMES ITEM 19 $^i 0 T I L -
22. TOTAL TAX DUE
ITEM 20 PLUS ITEM 21 $
23. PENALTY-LATE PAYMENT
STATE OF WASHINGTON MINIMUM PENALTY-$10.00 $
EMPLOYMENT SECURITY DEPARTMENT /
24.
OLYMPIA,`NASHINGTON 98504 INTEREST
$
21. PRIOR BALANCE AS OF
3/1J/3 +- . ' S
28. PENALTY- LATE REPORT
> -(l ']C7 `viA',(t --I Oi`S J1 ?HE SHACEC AREAS. S10.00
R DEPART MFr,T..L uSE 27 AMCUNT REMITTED _
Tax �E^1 L T NTEREST TOTAL iTEMS 22 THRU 26
28. TOTAL EXEMPT CORPORATE NUMBER OF CORPORATE ...•...
OF C R EARNINGS OFFICERS EXEMPT.PCM C -=c:z
THIS UARTER $ L_ L DURING THIS GUAR ER
29. +5T:'CNTH 2ND'.'C'+",
NUMBER OF COVERED EMPLOYEES
,0 TI°Y THAT THE`!FORMATION CONTAINED N THIS REPORT IS TRUE AND CORRECT AND THAT NO PART OF THE TAX REPORTED WAS OR IS TO BE]ED'JCTED"ROM'NORKERS WAGES,
GtrIA RE 1�(� ,•, �� \ TITLE DATE i� � TELEPHONE NO.
PAGE 2 DUPLI�ATE
=MP1 nVFP KFFP THIS COPY
AUILDI
GBNPR
EMIT
��- '����° 9
��^��� ��� k������������� ����^������� /
City~� ~, , Bremerton,~~. . .~°. ~~~. ., Washington
~�~^. ... .�� ~~^° �
OWNER'S VALUE I BLDG. DEPT.VALUE PLAN CHECK FEE RECEIPT NO. PERMIT FEE RECEIPT NO. TE
SITE ADDRESS/LOCATION
OWNER'S NAME_ % ADDRESS PHONE
CONTRACTOR
STATE CONTRACTOR'S LIC.#
ADDRESS PHONE
0 RESIDENCE BUSINESS El OTHER 11 NEW 4 REPAIR 0 REMODEL [I ADDITION 0 DEMOLISH
El SIGNS
PLANNING/ZONING STORIES OCCUPANCY
THIS PERMIT ISSUED FOR:
All provisions of laws and ordinances governing this type of work will be complied with whether specified herein or not.The granting of a permit does not presume
to give authority to violate or cancel the provisions of any other state or local law regulating construction or the performance of construction.
INSPECTIONS REQUIRED: rvu"u"""" El ,=""'»-f ''='"".» El Electrical El Wallboard'7~ ' "`"L*f
SEPARATE PERMITS ARE REQUIRED (WHERE APPLICABLE) FOR PLUMB|NG, MECHANICAL AND ELECTRICAL.
FOR INSPECTORS USE ONLY: RE|NSPECT|ON:
NOT
TYPE OF INSPECTION DATE TIME APPROVED APPROVED COMMENT DATE TIME APPROVED
FINAL INSPECTION APPROVEDBY-
Building